I cannot use/install normal perl distribution. And frankly that's not the
problem. I have seem ppl with same problem doing an install with regular
distribution of perl.
Anton
> -----Original Message-----
> From: Thomas A. Lowery [SMTP:[EMAIL PROTECTED]]
> Sent: Monday, May 28, 2001 12:25 PM
> To: DBI-Users
> Subject: Re: problem installing DBI for 9iAS
>
> On Sun, May 27, 2001 at 01:55:54PM -0700, Kokarski, Anton wrote:
> > Well it said that those are optional. And when I tried to build them I
> get
>
> Yes, they are optional.
>
> > problems during build of makefile via `perl Makefile.PL`.
> > I'm suspecting that my problems are much deeper than messing a few
> modules.
> > Is it possible that there is something wrong with my perl installation?
>
> It looks like you're including the perl libraries
> install by Oracle. Are you using the "perl" executable that installs
> with Oracle? I'd recommend you attempt to build DBI without the extra
> PERL5LIB inclusions using your local install of perl (only) instead of
> Oracle's.
>
> Tom
>
> > > -----Original Message-----
> > > From: brijpalsingh [SMTP:[EMAIL PROTECTED]]
> > > Sent: Sunday, May 27, 2001 2:10 AM
> > > To: Kokarski, Anton
> > > Cc: DBI-Users; [EMAIL PROTECTED]
> > > Subject: Re: problem installing DBI for 9iAS
> > >
> > > Sir,
> > > You will have to install the following modules.
>
> Not true.
>
> > >
> RPC(PlRPC-0.2001.tar.gz),Storable(Storable-1.0.11.tar.gz),Net-Daemon(Net-D
> > > aemon-0.27.tar.gz)
> > >
> > > which can be downloaded from the site mentioned in yr email.
> > >
> > >
> > > On Sat, 26 May 2001, Kokarski, Anton wrote:
> > >
> > > > I'm trying to build DBI module and get following error during make
> > > > this is kind of odd because this has been done before on our other
> > > machines
> > > > and we didn't get this problem.
> > > > I have seem people get this kind of error before but I have never
> found
> > > a
> > > > disent solution to it.
> > > >
> > > > Thank you for your help. If I find the cause of the problem I'll
> > > post/email
> > > > a workaround.
> > > >
> > > > # perl Makefile.PL
> > > > *** Note:
> > > > The optional PlRPC-modules (RPC::PlServer etc) are not
> installed.
> > > > If you want to use the DBD::Proxy driver and DBI::ProxyServer
> > > > modules, then you'll need to install the RPC::PlServer,
> > > RPC::PlClient,
> > > > Storable and Net::Daemon modules. The CPAN Bundle::DBI may help
> you.
> > > > You can install them any time after installing the DBI.
> > > > You do *not* need these modules for typical DBI usage.
> > > >
> > > > Optional modules are available from any CPAN mirror, in particular
> > > > http://www.perl.com/CPAN/modules/by-module
> > > > http://www.perl.org/CPAN/modules/by-module
> > > > ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module
> > > >
> > > > Writing Makefile for DBI
> > > >
> > > > Remember to actually *read* the README file!
> > > > Use 'make' to build the software (dmake or nmake on Windows).
> > > > Then 'make test' to execute self tests.
> > > > Then 'make install' to install the DBI and then delete this
> working
> > > > directory before unpacking and building any DBD::* drivers.
> > > >
> > > > #
> > > > # make
> > > > make: not found
> > > > # PATH=$PATH:/usr/local/bin
> > > > # export PATH
> > > > # make
> > > > gcc -c -I/usr/local/include -O3 -DVERSION=\"1.15\"
> > > -DXS_VERSION=\"1.15\"
> > > > -fPIC
> > > >
> -I/u01/app/oracle/product/9iAS/Apache/perl/lib/5.00503/sun4-solaris/CORE
> > > > -Wall -Wno-comment -DDBI_NO_THREADS Perl.c
> > > > Perl.xsi: In function `XS_DBD__Perl__dr_discon_all_':
> > > > Perl.xsi:38: `sv_yes' undeclared (first use in this function)
> > > > Perl.xsi:38: (Each undeclared identifier is reported only once
> > > > Perl.xsi:38: for each function it appears in.)
> > > > Perl.xsi:38: `sv_no' undeclared (first use in this function)
> > > > Perl.xsi: In function `XS_DBD__Perl__db__login':
> > > > Perl.xsi:63: `sv_yes' undeclared (first use in this function)
> > > > Perl.xsi:63: `sv_no' undeclared (first use in this function)
> > > > Perl.xsi: In function `XS_DBD__Perl__db_commit':
> > > > Perl.xsi:75: `sv_yes' undeclared (first use in this function)
> > > > Perl.xsi:75: `sv_no' undeclared (first use in this function)
> > > > Perl.xsi: In function `XS_DBD__Perl__db_rollback':
> > > > Perl.xsi:84: `sv_yes' undeclared (first use in this function)
> > > > Perl.xsi:84: `sv_no' undeclared (first use in this function)
> > > > Perl.xsi: In function `XS_DBD__Perl__db_disconnect':
> > > > Perl.xsi:108: `sv_yes' undeclared (first use in this function)
> > > > Perl.xsi:108: `sv_no' undeclared (first use in this function)
> > > > Perl.xsi: In function `XS_DBD__Perl__db_STORE':
> > > > Perl.xsi:121: `sv_yes' undeclared (first use in this function)
> > > > Perl.xsi:124: `sv_no' undeclared (first use in this function)
> > > > Perl.xsi: In function `XS_DBD__Perl__db_DESTROY':
> > > > Perl.xsi:143: `sv_yes' undeclared (first use in this function)
> > > > Perl.xsi: In function `XS_DBD__Perl__st__prepare':
> > > > Perl.xsi:197: `na' undeclared (first use in this function)
> > > > Perl.xsi:197: warning: left-hand operand of comma expression has no
> > > effect
> > > > Perl.xsi:197: warning: left-hand operand of comma expression has no
> > > effect
> > > > Perl.xsi:198: `sv_yes' undeclared (first use in this function)
> > > > Perl.xsi:198: `sv_no' undeclared (first use in this function)
> > > > Perl.xsi: In function `XS_DBD__Perl__st_bind_param':
> > > > Perl.xsi:233: `na' undeclared (first use in this function)
> > > > Perl.xsi:233: warning: left-hand operand of comma expression has no
> > > effect
> > > > Perl.xsi:233: warning: left-hand operand of comma expression has no
> > > effect
> > > > Perl.xsi:239: `sv_yes' undeclared (first use in this function)
> > > > Perl.xsi:239: `sv_no' undeclared (first use in this function)
> > > > Perl.xsi: In function `XS_DBD__Perl__st_bind_param_inout':
> > > > Perl.xsi:269: `na' undeclared (first use in this function)
> > > > Perl.xsi:269: warning: left-hand operand of comma expression has no
> > > effect
> > > > Perl.xsi:269: warning: left-hand operand of comma expression has no
> > > effect
> > > > Perl.xsi:274: `sv_yes' undeclared (first use in this function)
> > > > Perl.xsi:274: `sv_no' undeclared (first use in this function)
> > > > Perl.xsi: In function `XS_DBD__Perl__st_fetchrow_arrayref':
> > > > Perl.xsi:328: `sv_undef' undeclared (first use in this function)
> > > > Perl.xsi: In function `XS_DBD__Perl__st_finish':
> > > > Perl.xsi:369: `sv_yes' undeclared (first use in this function)
> > > > Perl.xsi:369: `sv_no' undeclared (first use in this function)
> > > > Perl.xsi: In function `XS_DBD__Perl__st_blob_read':
> > > > Perl.xsi:388: `sv_undef' undeclared (first use in this function)
> > > > Perl.xsi: In function `XS_DBD__Perl__st_STORE':
> > > > Perl.xsi:401: `sv_yes' undeclared (first use in this function)
> > > > Perl.xsi:404: `sv_no' undeclared (first use in this function)
> > > > Perl.xsi: In function `XS_DBD__Perl__st_DESTROY':
> > > > Perl.xsi:429: `sv_yes' undeclared (first use in this function)
> > > > make: *** [Perl.o] Error 1
> > > > # gcc -c -I/usr/local/include -O3 -DVERSION=\"1.15\"
> > > > -DXS_VERSION=\"1.15\" -fPIC
> > > >
> -I/u01/app/oracle/product/9iAS/Apache/perl/lib/5.00503/sun4-solaris/CORE
> > > > -Wall -Wno-comment -DDBI_NO_THREADS DBI.c
> > > > gcc: DBI.c: No such file or directory
> > > > gcc: No input files
> > > >
> > > >
> > > > My perl is
> > > >
> > > > $ perl -V
> > > > Summary of my perl5 (5.0 patchlevel 5 subversion 3) configuration:
> > > > Platform:
> > > > osname=solaris, osvers=2.6, archname=sun4-solaris
> > > > uname='sunos 5.6 generic_105181-14 sun4u sparc sunw,ultra-60 '
> > > > hint=recommended, useposix=true, d_sigaction=define
> > > > usethreads=undef useperlio=undef d_sfio=undef
> > > > Compiler:
> > > > cc='gcc', optimize=' -O3', gccversion=
> > > > cppflags='-I/usr/local/include'
> > > > ccflags ='-I/usr/local/include'
> > > > stdchar='unsigned char', d_stdstdio=define, usevfork=false
> > > > intsize=4, longsize=4, ptrsize=4, doublesize=8
> > > > d_longlong=define, longlongsize=8, d_longdbl=define,
> longdblsize=16
> > > > alignbytes=8, usemymalloc=y, prototype=define
> > > > Linker and Libraries:
> > > > ld='gcc', ldflags =' -L/usr/local/lib'
> > > > libpth=/usr/local/lib /lib /usr/lib /usr/ccs/lib
> > > > libs=-lsocket -lnsl -ldl -lm -lc -lcrypt
> > > > libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
> > > > Dynamic Linking:
> > > > dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
> > > > cccdlflags='-fPIC', lddlflags='-G -L/usr/local/lib'
> > > >
> > > >
> > > > Characteristics of this binary (from libperl):
> > > > Built under solaris
> > > > Compiled at Sep 20 2000 10:55:44
> > > > %ENV:
> > > >
> > > >
> > >
> PERL5LIB="/u01/app/oracle/product/9iAS/Apache/perl/lib/5.00503:/u01/app/or
> > > ac
> > > > le/product/9iAS/Apache/perl/lib/site_perl/5.005"
> > > > @INC:
> > > >
> /u01/app/oracle/product/9iAS/Apache/perl/lib/5.00503/sun4-solaris
> > > > /u01/app/oracle/product/9iAS/Apache/perl/lib/5.00503
> > > >
> > > >
> > >
> /u01/app/oracle/product/9iAS/Apache/perl/lib/site_perl/5.005/sun4-solaris
> > > > /u01/app/oracle/product/9iAS/Apache/perl/lib/site_perl/5.005
> > > > /vobs/pdc_perl/bin/Solaris/Opt/lib/5.00503/sun4-solaris
> > > > /vobs/pdc_perl/bin/Solaris/Opt/lib/5.00503
> > > > /vobs/pdc_perl/bin/Solaris/Opt/lib/site_perl/5.005/sun4-solaris
> > > > /vobs/pdc_perl/bin/Solaris/Opt/lib/site_perl/5.005
> > > > .
> > > > $
>
> --
> Thomas A. Lowery
> See DBI/FAQ http://tlowery.hypermart.net
>
> _________________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.com address at http://mail.yahoo.com
