Hi Ron, I built this directly from source. The older version seems to have come when I installed DBI (again built from source) so it seems like the newer version doesn't default to installing into the same place, perhaps?
Paul Quoting "Reidy, Ron" <[EMAIL PROTECTED]>: > Paul, > > I do not believe it is a good idea to delete a module in the module tree. > There are (several?) lists of modules stored somewhere in the lib > directory. > > I am not really sure how you have 2 different File.pm - I have only 1 under > the site_perl directory. > > Did you build Perl from source, or install via a RPM or binary distro? > > ----------------- > Ron Reidy > Lead DBA > Array BioPharma, Inc. > > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Sent: Wednesday, July 06, 2005 8:00 AM > To: dbi-users > Subject: RE: Installing DBD::File via CPAN > > > Hi everyone, > > After a little tracking down I realized what's happening, but I can't quite > > pick out why. There are two versions of DBD::File in my tree one at: > /db2blast/Paul/perl5.8.7/lib/site_perl/5.8.7/aix/DBD (v0.33) > and one at > /db2blast/Paul/perl5.8.7/lib/site_perl/5.8.7/DBD (v0.34) > > This was a fresh build of perl, and all modules were updated/installed via > the > CPAN module so I wasn't expecting to get myself confused with multiple > versions > like so. Any ideas where I may have gone wrong? Or, for that matter, am I > > safe just deleting File.pm from the aix subdirectory? > > Many thanks, > Paul > > > Quoting "Reidy, Ron" <[EMAIL PROTECTED]>: > > > Paul, > > > > Did you check the timestamp of the new .pm and/or .so? Maybe the > internal > > $VERSION variable was not updated by the module author. > > > > ----------------- > > Ron Reidy > > Lead DBA > > Array BioPharma, Inc. > > > > > > -----Original Message----- > > From: Paul Boutros [mailto:[EMAIL PROTECTED] > > Sent: Tuesday, July 05, 2005 10:52 AM > > To: dbi-users > > Subject: Installing DBD::File via CPAN > > > > > > Hello, > > > > I have a small-but-weird problem. When I install the 0.34 release of > > DBD::File via CPAN it seems to make/test/install properly but... it just > > doesn't stick. The installation seems to stay at 0.33. I also get when > I > > download directly and do the make/test/install myself. Here's the > session > > to show what I mean. Any ideas what might be going on? This is Perl > 5.8.7 > > on AIX 5.2.0.0 > > > > Paul > > > > $ perl -v > > > > This is perl, v5.8.7 built for aix > > > > Copyright 1987-2005, Larry Wall > > > > Perl may be copied only under the terms of either the Artistic License or > > the > > GNU General Public License, which may be found in the Perl 5 source kit. > > > > Complete documentation for Perl, including FAQ lists, should be found on > > this system using `man perl' or `perldoc perl'. If you have access to > the > > Internet, point your browser at http://www.perl.org/, the Perl Home Page. > > > > $ perl -MCPAN -e shell > > Terminal does not support AddHistory. > > > > cpan shell -- CPAN exploration and modules installation (v1.7601) > > ReadLine support available (try 'install Bundle::CPAN') > > > > cpan> r > > CPAN: Storable loaded ok > > Going to read /db2/dlink/.cpan/Metadata > > Database was generated on Mon, 04 Jul 2005 19:58:56 GMT > > > > Package namespace installed latest in CPAN file > > DBD::File 0.33 0.34 > > J/JZ/JZUCKER/DBD-File-0.34.tar.gz > > 118 installed modules have no parseable version number > > > > cpan> install DBD::File > > Running install for module DBD::File > > Running make for J/JZ/JZUCKER/DBD-File-0.34.tar.gz > > CPAN: Digest::MD5 loaded ok > > CPAN: Compress::Zlib loaded ok > > Checksum for > > /db2/dlink/.cpan/sources/authors/id/J/JZ/JZUCKER/DBD-File-0.34.tar.gz ok > > Scanning cache /db2/dlink/.cpan/build for sizes > > x DBD-File-0.34 > > x DBD-File-0.34/MANIFEST, 142 bytes, 1 media blocks. > > x DBD-File-0.34/META.yml, 340 bytes, 1 media blocks. > > x DBD-File-0.34/t > > x DBD-File-0.34/t/00base.t, 96 bytes, 1 media blocks. > > x DBD-File-0.34/Changes, 233 bytes, 1 media blocks. > > x DBD-File-0.34/lib > > x DBD-File-0.34/lib/DBD > > x DBD-File-0.34/lib/DBD/File.pm, 19878 bytes, 39 media blocks. > > x DBD-File-0.34/README, 352 bytes, 1 media blocks. > > x DBD-File-0.34/Makefile.PL, 524 bytes, 2 media blocks. > > Removing previously used /db2/dlink/.cpan/build/DBD-File-0.34 > > > > CPAN.pm: Going to build J/JZ/JZUCKER/DBD-File-0.34.tar.gz > > > > Checking if your kit is complete... > > Looks good > > Writing Makefile for DBD::File > > cp lib/DBD/File.pm blib/lib/DBD/File.pm > > Manifying blib/man3/DBD::File.3 > > /usr/bin/make -- OK > > Running make test > > PERL_DL_NONLAZY=1 /db2blast/Paul/perl5.8.7/bin/perl > > "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" > > t/*.t > > t/00base....ok > > All tests successful. > > Files=1, Tests=1, 0 wallclock secs ( 0.03 cusr + 0.04 csys = 0.07 CPU) > > Target "test" is up to date. > > /usr/bin/make test -- OK > > Running make install > > Writing > > /db2blast/Paul/perl5.8.7/lib/site_perl/5.8.7/aix/auto/DBD/File/.packlist > > Appending installation info to > > /db2blast/Paul/perl5.8.7/lib/5.8.7/aix/perllocal.pod > > /usr/bin/make install -- OK > > > > cpan> q > > Terminal does not support GetHistory. > > Lockfile removed. > > $ perl -MDBD::File -e 'print $DBD::File::VERSION' > > 0.33$ > > $ perl -MCPAN -e shell > > Terminal does not support AddHistory. > > > > cpan shell -- CPAN exploration and modules installation (v1.7601) > > ReadLine support available (try 'install Bundle::CPAN') > > > > cpan> r > > CPAN: Storable loaded ok > > Going to read /db2/dlink/.cpan/Metadata > > Database was generated on Mon, 04 Jul 2005 19:58:56 GMT > > > > Package namespace installed latest in CPAN file > > DBD::File 0.33 0.34 > > J/JZ/JZUCKER/DBD-File-0.34.tar.gz > > 118 installed modules have no parseable version number > > > > cpan> q > > Terminal does not support GetHistory. > > Lockfile removed. > > $ perl -v > > > > This is perl, v5.8.7 built for aix > > > > Copyright 1987-2005, Larry Wall > > > > Perl may be copied only under the terms of either the Artistic License or > > the > > GNU General Public License, which may be found in the Perl 5 source kit. > > > > Complete documentation for Perl, including FAQ lists, should be found on > > this system using `man perl' or `perldoc perl'. If you have access to > the > > Internet, point your browser at http://www.perl.org/, the Perl Home Page. > > > > $ oslevel > > 5.2.0.0 > > > > > > This electronic message transmission is a PRIVATE communication which > > contains > > information which may be confidential or privileged. The information is > > intended > > to be for the use of the individual or entity named above. If you are not > the > > > > intended recipient, please be aware that any disclosure, copying, > > distribution > > or use of the contents of this information is prohibited. Please notify > the > > sender of the delivery error by replying to this message, or notify us > by > > telephone (877-633-2436, ext. 0), and then delete it from your system. > > > > > > > > This electronic message transmission is a PRIVATE communication which > contains > information which may be confidential or privileged. The information is > intended > to be for the use of the individual or entity named above. If you are not the > > intended recipient, please be aware that any disclosure, copying, > distribution > or use of the contents of this information is prohibited. Please notify the > sender of the delivery error by replying to this message, or notify us by > telephone (877-633-2436, ext. 0), and then delete it from your system. > >
