Hello, Samuel result here as Ben Armstrong. It seems to be working like a charm, loading the firmware asking for ESSID and PSK, but no further, see attached dmesg. There is nothing else in the syslog between
[ 180.876374] wlan0: associated and [ 181.887598] wlan0: deauthenticating from f8:1e:df:fa:d0:ec by local choice (reason=1) It can be noted that these are always 1 second appart, there's probably a reason for that. Samuel
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-5-486 (Debian 2.6.32-29) ([email protected]) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 Fri Dec 10 15:32:53 UTC 2010 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f65c800 (usable) [ 0.000000] BIOS-e820: 000000003f65c800 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved) [ 0.000000] BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x3f65c max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 03F800000 mask FFF800000 uncachable [ 0.000000] 2 base 03F700000 mask FFFF00000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 3efd3000 - 3f63b0e2 [ 0.000000] Allocated new RAMDISK: 00100000 - 007680e2 [ 0.000000] Move RAMDISK from 000000003efd3000 - 000000003f63b0e1 to 00100000 - 007680e1 [ 0.000000] ACPI: RSDP 000fc0e0 00014 (v00 DELL ) [ 0.000000] ACPI: RSDT 3f65cdcc 00044 (v01 DELL M07 27D8071C ASL 00000061) [ 0.000000] ACPI: FACP 3f65dc00 00074 (v01 DELL M07 27D8071C ASL 00000061) [ 0.000000] ACPI: DSDT 3f65e800 04BBE (v01 INT430 SYSFexxx 00001001 INTL 20050624) [ 0.000000] ACPI: FACS 3f66d000 00040 [ 0.000000] ACPI: HPET 3f65e300 00038 (v01 DELL M07 00000001 ASL 00000061) [ 0.000000] ACPI: APIC 3f65e400 00068 (v01 DELL M07 27D8071C ASL 00000047) [ 0.000000] ACPI: ASF! 3f65e000 0007E (v32 DELL M07 27D8071C ASL 00000061) [ 0.000000] ACPI: MCFG 3f65e3c0 0003E (v16 DELL M07 27D8071C ASL 00000061) [ 0.000000] ACPI: TCPA 3f65e700 00032 (v01 DELL M07 27D8071C ASL 00000061) [ 0.000000] ACPI: SLIC 3f65e49c 00176 (v01 DELL M07 27D8071C ASL 00000061) [ 0.000000] ACPI: SSDT 3f65ce53 004DC (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 126MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0001000000 - 0001453a28] TEXT DATA BSS ==> [0001000000 - 0001453a28] [ 0.000000] #2 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #3 [0001454000 - 000145a180] BRK ==> [0001454000 - 000145a180] [ 0.000000] #4 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #5 [0000100000 - 00007680e2] NEW RAMDISK ==> [0000100000 - 00007680e2] [ 0.000000] #6 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003f65c [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003f65c [ 0.000000] On node 0 totalpages: 259579 [ 0.000000] free_area_init_node: node 0, pgdat c1360bb4, node_mem_map c145c000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3967 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 253 pages used for memmap [ 0.000000] HighMem zone: 32097 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:b0000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257550 [ 0.000000] Kernel command line: vga=788 initrd=initrd.gz -- quiet BOOT_IMAGE=linux [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:0003f65c) [ 0.000000] Memory: 1018016k/1038704k available (2337k kernel code, 19972k reserved, 1149k data, 444k init, 129400k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc1368000 - 0xc13d7000 ( 444 kB) [ 0.000000] .data : 0xc124848f - 0xc1367c00 (1149 kB) [ 0.000000] .text : 0xc1000000 - 0xc124848f (2337 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:288 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1329.987 MHz processor. [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 2659.97 BogoMIPS (lpj=5319948) [ 0.004019] Security Framework initialized [ 0.004025] SELinux: Disabled at boot. [ 0.004031] Mount-cache hash table entries: 512 [ 0.004127] Initializing cgroup subsys ns [ 0.004132] Initializing cgroup subsys cpuacct [ 0.004135] Initializing cgroup subsys devices [ 0.004138] Initializing cgroup subsys freezer [ 0.004140] Initializing cgroup subsys net_cls [ 0.004163] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004166] CPU: L2 cache: 2048K [ 0.004171] using mwait in idle threads. [ 0.004177] CPU: Intel(R) Core(TM)2 Duo CPU U7700 @ 1.33GHz stepping 0d [ 0.004184] Checking 'hlt' instruction... OK. [ 0.022199] ACPI: Core revision 20090903 [ 0.029454] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.029842] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.072001] devtmpfs: initialized [ 0.072001] regulator: core version 0.5 [ 0.072001] NET: Registered protocol family 16 [ 0.072001] EISA bus registered [ 0.072001] ACPI: bus type pci registered [ 0.072001] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.072001] PCI: MCFG area at f0000000 reserved in E820 [ 0.072001] PCI: Using MMCONFIG for extended config space [ 0.072001] PCI: Using configuration type 1 for base access [ 0.072001] bio: create slab <bio-0> at 0 [ 0.072001] ACPI: EC: Look up EC in DSDT [ 0.104643] ACPI Warning: Incorrect checksum in table [TCPA] - 00, should be 8C (20090903/tbutils-314) [ 0.104697] ACPI: SSDT 3f65ce10 00043 (v01 LMPWR DELLLOM 00001001 INTL 20050624) [ 0.117064] ACPI: Interpreter enabled [ 0.117070] ACPI: (supports S0 S3 S4 S5) [ 0.117095] ACPI: Using IOAPIC for interrupt routing [ 0.204111] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 0.219985] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.220103] pci 0000:00:02.0: reg 10 32bit mmio: [0xeff00000-0xeff7ffff] [ 0.220111] pci 0000:00:02.0: reg 14 io port: [0xeff8-0xefff] [ 0.220117] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.220124] pci 0000:00:02.0: reg 1c 32bit mmio: [0xefec0000-0xefefffff] [ 0.220174] pci 0000:00:02.1: reg 10 32bit mmio: [0xeff80000-0xefffffff] [ 0.220307] pci 0000:00:1b.0: reg 10 64bit mmio: [0xefebc000-0xefebffff] [ 0.220377] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.220383] pci 0000:00:1b.0: PME# disabled [ 0.220491] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.220497] pci 0000:00:1c.0: PME# disabled [ 0.220608] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.220614] pci 0000:00:1c.1: PME# disabled [ 0.220726] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.220732] pci 0000:00:1c.2: PME# disabled [ 0.220810] pci 0000:00:1d.0: reg 20 io port: [0xbf80-0xbf9f] [ 0.220884] pci 0000:00:1d.1: reg 20 io port: [0xbf60-0xbf7f] [ 0.220959] pci 0000:00:1d.2: reg 20 io port: [0xbf40-0xbf5f] [ 0.221033] pci 0000:00:1d.3: reg 20 io port: [0xbf20-0xbf3f] [ 0.221111] pci 0000:00:1d.7: reg 10 32bit mmio: [0xffa80000-0xffa803ff] [ 0.221183] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.221189] pci 0000:00:1d.7: PME# disabled [ 0.221383] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.221389] pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO [ 0.221395] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f) [ 0.221403] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f) [ 0.221466] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7] [ 0.221476] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7] [ 0.221485] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177] [ 0.221495] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377] [ 0.221505] pci 0000:00:1f.1: reg 20 io port: [0xbfa0-0xbfaf] [ 0.221595] pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df] [ 0.221896] pci 0000:0c:00.0: reg 10 32bit mmio: [0xefdff000-0xefdfffff] [ 0.222148] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold [ 0.222161] pci 0000:0c:00.0: PME# disabled [ 0.222272] pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.222440] pci 0000:00:1c.1: bridge 32bit mmio: [0xefd00000-0xefdfffff] [ 0.222574] pci 0000:09:00.0: reg 10 64bit mmio: [0xefcf0000-0xefcfffff] [ 0.222680] pci 0000:09:00.0: PME# supported from D3hot D3cold [ 0.222687] pci 0000:09:00.0: PME# disabled [ 0.222732] pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.222848] pci 0000:00:1c.2: bridge 32bit mmio: [0xefc00000-0xefcfffff] [ 0.222907] pci 0000:02:01.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.222935] pci 0000:02:01.0: supports D1 D2 [ 0.222938] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.222944] pci 0000:02:01.0: PME# disabled [ 0.222992] pci 0000:02:01.1: reg 10 32bit mmio: [0xefbff800-0xefbfffff] [ 0.223058] pci 0000:02:01.1: supports D1 D2 [ 0.223061] pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.223068] pci 0000:02:01.1: PME# disabled [ 0.223116] pci 0000:02:01.2: reg 10 32bit mmio: [0xefbff700-0xefbff7ff] [ 0.223184] pci 0000:02:01.2: supports D1 D2 [ 0.223187] pci 0000:02:01.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.223193] pci 0000:02:01.2: PME# disabled [ 0.223274] pci 0000:00:1e.0: transparent bridge [ 0.223283] pci 0000:00:1e.0: bridge 32bit mmio: [0xefb00000-0xefbfffff] [ 0.223341] pci_bus 0000:00: on NUMA node 0 [ 0.223347] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.223667] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.223813] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.223907] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.224009] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXP0._PRT] [ 0.268283] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 0.268433] ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7) [ 0.272052] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *3 [ 0.272198] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11) [ 0.272344] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.272492] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.272641] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.272790] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.272923] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.272932] vgaarb: loaded [ 0.272996] PCI: Using ACPI for IRQ routing [ 0.273190] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.273196] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.276017] Switching to clocksource tsc [ 0.277508] pnp: PnP ACPI init [ 0.277518] ACPI: bus type pnp registered [ 0.312513] pnp 00:02: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.312519] pnp 00:02: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.312606] pnp 00:03: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.312612] pnp 00:03: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.312617] pnp 00:03: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.312622] pnp 00:03: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.352695] pnp: PnP ACPI: found 15 devices [ 0.352698] ACPI: ACPI bus type pnp unregistered [ 0.352702] PnPBIOS: Disabled by ACPI PNP [ 0.352714] system 00:00: iomem range 0x0-0x9fbff could not be reserved [ 0.352719] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved [ 0.352723] system 00:00: iomem range 0xc0000-0xcffff could not be reserved [ 0.352728] system 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 0.352732] system 00:00: iomem range 0x100000-0x3f65c7ff could not be reserved [ 0.352736] system 00:00: iomem range 0x3f65c800-0x3f6fffff has been reserved [ 0.352741] system 00:00: iomem range 0x3f700000-0x3f7fffff has been reserved [ 0.352745] system 00:00: iomem range 0x3f700000-0x3fefffff could not be reserved [ 0.352750] system 00:00: iomem range 0xffb00000-0xffffffff has been reserved [ 0.352755] system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved [ 0.352759] system 00:00: iomem range 0xfee00000-0xfee0ffff has been reserved [ 0.352763] system 00:00: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.352768] system 00:00: iomem range 0xfed45000-0xfed9ffff has been reserved [ 0.352772] system 00:00: iomem range 0xffa80000-0xffa83fff could not be reserved [ 0.352777] system 00:00: iomem range 0xf4000000-0xf4003fff has been reserved [ 0.352781] system 00:00: iomem range 0xf4004000-0xf4004fff has been reserved [ 0.352786] system 00:00: iomem range 0xf4005000-0xf4005fff has been reserved [ 0.352790] system 00:00: iomem range 0xf4006000-0xf4006fff has been reserved [ 0.352795] system 00:00: iomem range 0xf4008000-0xf400bfff has been reserved [ 0.352799] system 00:00: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.352808] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.352815] system 00:03: ioport range 0xf400-0xf4fe has been reserved [ 0.352820] system 00:03: ioport range 0x1080-0x10bf has been reserved [ 0.352824] system 00:03: ioport range 0x10c0-0x10df has been reserved [ 0.352828] system 00:03: ioport range 0x809-0x809 has been reserved [ 0.352836] system 00:08: ioport range 0xc80-0xcaf has been reserved [ 0.352841] system 00:08: ioport range 0xcc0-0xcff could not be reserved [ 0.352845] system 00:08: ioport range 0x910-0x91f has been reserved [ 0.352849] system 00:08: ioport range 0x920-0x92f has been reserved [ 0.352853] system 00:08: ioport range 0xcbc-0xcbf has been reserved [ 0.352857] system 00:08: ioport range 0x930-0x97f has been reserved [ 0.352866] system 00:0b: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.352874] system 00:0e: ioport range 0xcb0-0xcbb has been reserved [ 0.352878] system 00:0e: iomem range 0xfed40000-0xfed44fff has been reserved [ 0.387645] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b [ 0.387650] pci 0000:00:1c.0: IO window: 0x2000-0x2fff [ 0.387658] pci 0000:00:1c.0: MEM window: 0x44000000-0x441fffff [ 0.387665] pci 0000:00:1c.0: PREFETCH window: 0x00000044200000-0x000000443fffff [ 0.387675] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c [ 0.387680] pci 0000:00:1c.1: IO window: 0x3000-0x3fff [ 0.387688] pci 0000:00:1c.1: MEM window: 0xefd00000-0xefdfffff [ 0.387694] pci 0000:00:1c.1: PREFETCH window: 0x00000044400000-0x000000445fffff [ 0.387704] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:09 [ 0.387709] pci 0000:00:1c.2: IO window: 0x4000-0x4fff [ 0.387716] pci 0000:00:1c.2: MEM window: 0xefc00000-0xefcfffff [ 0.387723] pci 0000:00:1c.2: PREFETCH window: 0x00000044600000-0x000000447fffff [ 0.387739] pci 0000:02:01.0: CardBus bridge, secondary bus 0000:03 [ 0.387743] pci 0000:02:01.0: IO window: 0x005000-0x0050ff [ 0.387749] pci 0000:02:01.0: IO window: 0x005400-0x0054ff [ 0.387756] pci 0000:02:01.0: PREFETCH window: 0x40000000-0x43ffffff [ 0.387762] pci 0000:02:01.0: MEM window: 0x48000000-0x4bffffff [ 0.387768] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.387773] pci 0000:00:1e.0: IO window: 0x5000-0x5fff [ 0.387781] pci 0000:00:1e.0: MEM window: 0xefb00000-0xefbfffff [ 0.387787] pci 0000:00:1e.0: PREFETCH window: 0x40000000-0x43ffffff [ 0.387809] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.387816] pci 0000:00:1c.0: setting latency timer to 64 [ 0.387829] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.387836] pci 0000:00:1c.1: setting latency timer to 64 [ 0.387849] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.387855] pci 0000:00:1c.2: setting latency timer to 64 [ 0.387865] pci 0000:00:1e.0: setting latency timer to 64 [ 0.387877] pci 0000:02:01.0: enabling device (0000 -> 0003) [ 0.387884] pci 0000:02:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.387893] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.387897] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.387901] pci_bus 0000:0b: resource 0 io: [0x2000-0x2fff] [ 0.387905] pci_bus 0000:0b: resource 1 mem: [0x44000000-0x441fffff] [ 0.387909] pci_bus 0000:0b: resource 2 pref mem [0x44200000-0x443fffff] [ 0.387912] pci_bus 0000:0c: resource 0 io: [0x3000-0x3fff] [ 0.387916] pci_bus 0000:0c: resource 1 mem: [0xefd00000-0xefdfffff] [ 0.387920] pci_bus 0000:0c: resource 2 pref mem [0x44400000-0x445fffff] [ 0.387924] pci_bus 0000:09: resource 0 io: [0x4000-0x4fff] [ 0.387927] pci_bus 0000:09: resource 1 mem: [0xefc00000-0xefcfffff] [ 0.387931] pci_bus 0000:09: resource 2 pref mem [0x44600000-0x447fffff] [ 0.387934] pci_bus 0000:02: resource 0 io: [0x5000-0x5fff] [ 0.387938] pci_bus 0000:02: resource 1 mem: [0xefb00000-0xefbfffff] [ 0.387942] pci_bus 0000:02: resource 2 pref mem [0x40000000-0x43ffffff] [ 0.387945] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.387949] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] [ 0.387952] pci_bus 0000:03: resource 0 io: [0x5000-0x50ff] [ 0.387956] pci_bus 0000:03: resource 1 io: [0x5400-0x54ff] [ 0.387959] pci_bus 0000:03: resource 2 pref mem [0x40000000-0x43ffffff] [ 0.387963] pci_bus 0000:03: resource 3 mem: [0x48000000-0x4bffffff] [ 0.388003] NET: Registered protocol family 2 [ 0.388090] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.388446] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.389127] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [ 0.389289] TCP: Hash tables configured (established 131072 bind 65536) [ 0.389293] TCP reno registered [ 0.389350] NET: Registered protocol family 1 [ 0.389372] pci 0000:00:02.0: Boot video device [ 0.389538] Unpacking initramfs... [ 0.664989] Freeing initrd memory: 6560k freed [ 0.669595] audit: initializing netlink socket (disabled) [ 0.669615] type=2000 audit(1295897924.667:1): initialized [ 0.674448] highmem bounce pool size: 64 pages [ 0.674455] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.676155] VFS: Disk quotas dquot_6.5.2 [ 0.676222] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.676310] msgmni has been set to 1749 [ 0.676504] alg: No test for stdrng (krng) [ 0.676568] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.676573] io scheduler noop registered [ 0.676575] io scheduler anticipatory registered [ 0.676578] io scheduler deadline registered [ 0.676621] io scheduler cfq registered (default) [ 0.676790] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.676804] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.676990] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X [ 0.677003] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.677183] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X [ 0.677196] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.677433] vesafb: framebuffer at 0xd0000000, mapped to 0xf8080000, using 1875k, total 7872k [ 0.677437] vesafb: mode is 800x600x16, linelength=1600, pages=7 [ 0.677440] vesafb: scrolling: redraw [ 0.677444] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.688828] Console: switching to colour frame buffer device 100x37 [ 0.699895] fb0: VESA VGA frame buffer device [ 0.699963] isapnp: Scanning for PnP cards... [ 1.010575] isapnp: No Plug & Play device found [ 1.012164] Linux agpgart interface v0.103 [ 1.012239] agpgart-intel 0000:00:00.0: Intel 945GM Chipset [ 1.012743] agpgart-intel 0000:00:00.0: detected 7932K stolen memory [ 1.016051] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 1.016129] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.016274] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.016789] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.016959] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.019939] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.019947] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.020076] mice: PS/2 mouse device common for all mice [ 1.020139] rtc_cmos 00:06: RTC can wake from S4 [ 1.020179] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 1.020212] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.020252] EISA: Probing bus 0 at eisa.0 [ 1.020255] EISA: Cannot allocate resource for mainboard [ 1.020259] Cannot allocate resource for EISA slot 1 [ 1.020261] Cannot allocate resource for EISA slot 2 [ 1.020264] Cannot allocate resource for EISA slot 3 [ 1.020267] Cannot allocate resource for EISA slot 4 [ 1.020269] Cannot allocate resource for EISA slot 5 [ 1.020285] EISA: Detected 0 cards. [ 1.020288] cpuidle: using governor ladder [ 1.020290] cpuidle: using governor menu [ 1.020295] No iBFT detected. [ 1.020752] TCP cubic registered [ 1.020926] NET: Registered protocol family 10 [ 1.021418] lo: Disabled Privacy Extensions [ 1.021776] Mobile IPv6 [ 1.021779] NET: Registered protocol family 17 [ 1.021786] Using IPI Shortcut mode [ 1.021867] PM: Resume from disk failed. [ 1.021880] registered taskstats version 1 [ 1.022427] rtc_cmos 00:06: setting system clock to 2011-01-24 19:38:45 UTC (1295897925) [ 1.022474] Initalizing network drop monitor service [ 1.022497] Freeing unused kernel memory: 444k freed [ 1.022681] Write protecting the kernel text: 2340k [ 1.022709] Write protecting the kernel read-only data: 896k [ 1.023435] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.900389] usbcore: registered new interface driver usbfs [ 1.900569] usbcore: registered new interface driver hub [ 1.901305] usbcore: registered new device driver usb [ 1.909049] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.909096] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.909119] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.909124] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.909142] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.909163] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 1.909178] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.913079] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.926630] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80000 [ 1.945224] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.945267] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.945271] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.945275] usb usb1: Product: EHCI Host Controller [ 1.945278] usb usb1: Manufacturer: Linux 2.6.32-5-486 ehci_hcd [ 1.945281] usb usb1: SerialNumber: 0000:00:1d.7 [ 1.945429] usb usb1: configuration #1 chosen from 1 choice [ 1.945513] hub 1-0:1.0: USB hub found [ 1.945523] hub 1-0:1.0: 8 ports detected [ 1.945972] parport_pc 00:0d: reported by Plug and Play ACPI [ 1.946055] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [ 1.964728] tg3.c:v3.102 (September 1, 2009) [ 1.964752] tg3 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.964764] tg3 0000:09:00.0: setting latency timer to 64 [ 1.966895] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.966904] ACPI: Thermal Zone [THM] (64 C) [ 1.974374] firewire_ohci 0000:02:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.976539] cfg80211: Using static regulatory domain info [ 1.976542] cfg80211: Regulatory domain: US [ 1.976544] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1.976549] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 1.976553] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 1.976557] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 1.976560] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 1.976564] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 1.976568] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 1.976784] cfg80211: Calling CRDA for country: US [ 1.976838] uhci_hcd: USB Universal Host Controller Interface driver [ 1.976886] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.976896] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.976901] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.976914] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.976949] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80 [ 1.976998] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.977002] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.977006] usb usb2: Product: UHCI Host Controller [ 1.977009] usb usb2: Manufacturer: Linux 2.6.32-5-486 uhci_hcd [ 1.977012] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.977154] usb usb2: configuration #1 chosen from 1 choice [ 1.977237] hub 2-0:1.0: USB hub found [ 1.977246] hub 2-0:1.0: 2 ports detected [ 1.977308] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.977316] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.977321] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.977333] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.977370] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60 [ 1.977409] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.977413] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.977416] usb usb3: Product: UHCI Host Controller [ 1.977419] usb usb3: Manufacturer: Linux 2.6.32-5-486 uhci_hcd [ 1.977422] usb usb3: SerialNumber: 0000:00:1d.1 [ 1.977547] usb usb3: configuration #1 chosen from 1 choice [ 1.977627] hub 3-0:1.0: USB hub found [ 1.977636] hub 3-0:1.0: 2 ports detected [ 1.977693] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 1.977701] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.977706] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.977715] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.977750] uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40 [ 1.977789] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.977792] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.977796] usb usb4: Product: UHCI Host Controller [ 1.977799] usb usb4: Manufacturer: Linux 2.6.32-5-486 uhci_hcd [ 1.977802] usb usb4: SerialNumber: 0000:00:1d.2 [ 1.977927] usb usb4: configuration #1 chosen from 1 choice [ 1.978006] hub 4-0:1.0: USB hub found [ 1.978015] hub 4-0:1.0: 2 ports detected [ 1.978069] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 1.978081] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 1.978086] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.978095] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 1.978130] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20 [ 1.978168] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.978172] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.978176] usb usb5: Product: UHCI Host Controller [ 1.978179] usb usb5: Manufacturer: Linux 2.6.32-5-486 uhci_hcd [ 1.978182] usb usb5: SerialNumber: 0000:00:1d.3 [ 1.994185] usb usb5: configuration #1 chosen from 1 choice [ 1.994287] hub 5-0:1.0: USB hub found [ 1.994297] hub 5-0:1.0: 2 ports detected [ 2.016095] eth0: Tigon3 [partno(BCM95752) rev 6002] (PCI Express) MAC address 00:21:70:b4:36:49 [ 2.016100] eth0: attached PHY is 5752 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 2.016104] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 2.016107] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 2.056029] firewire_ohci: Added fw-ohci device 0000:02:01.1, OHCI version 1.10 [ 2.056132] yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:0201] [ 2.137805] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks [ 2.137810] iwl3945: Copyright(c) 2003-2009 Intel Corporation [ 2.137894] iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.137910] iwl3945 0000:0c:00.0: setting latency timer to 64 [ 2.210025] yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0c38, PCI irq 19 [ 2.210030] yenta_cardbus 0000:02:01.0: Socket status: 30000006 [ 2.210035] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06 [ 2.210044] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff [ 2.210049] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x5fff: clean. [ 2.210342] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0xefb00000 - 0xefbfffff [ 2.210346] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff [ 2.219516] iwl3945 0000:0c:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels [ 2.219521] iwl3945 0000:0c:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 2.219669] iwl3945 0000:0c:00.0: irq 27 for MSI/MSI-X [ 2.244454] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 2.376017] usb 1-8: new high speed USB device using ehci_hcd and address 3 [ 2.472875] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 2.474961] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 2.475830] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 2.476589] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 2.477331] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 2.508328] usb 1-8: New USB device found, idVendor=413c, idProduct=a005 [ 2.508332] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.508431] usb 1-8: configuration #1 chosen from 1 choice [ 2.508631] hub 1-8:1.0: USB hub found [ 2.508727] hub 1-8:1.0: 7 ports detected [ 2.556076] firewire_core: created device fw0: GUID 424fc0002f427870, S400 [ 2.748028] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 2.905010] usb 2-2: New USB device found, idVendor=413c, idProduct=a005 [ 2.905015] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.905143] usb 2-2: configuration #1 chosen from 1 choice [ 2.908056] hub 2-2:1.0: USB hub found [ 2.910004] hub 2-2:1.0: 4 ports detected [ 2.988091] usb 1-8.1: new high speed USB device using ehci_hcd and address 4 [ 3.080835] usb 1-8.1: New USB device found, idVendor=413c, idProduct=9001 [ 3.080840] usb 1-8.1: New USB device strings: Mfr=56, Product=71, SerialNumber=0 [ 3.080844] usb 1-8.1: Product: A04 [ 3.080847] usb 1-8.1: Manufacturer: Dell USB Drive [ 3.080989] usb 1-8.1: configuration #1 chosen from 1 choice [ 3.141469] SCSI subsystem initialized [ 3.156288] Initializing USB Mass Storage driver... [ 3.160091] scsi0 : SCSI emulation for USB Mass Storage devices [ 3.160274] usbcore: registered new interface driver usb-storage [ 3.160279] USB Mass Storage support registered. [ 3.160878] usb-storage: device found at 4 [ 3.160880] usb-storage: waiting for device to settle before scanning [ 3.168100] usb 1-8.3: new low speed USB device using ehci_hcd and address 5 [ 3.281961] usb 1-8.3: New USB device found, idVendor=413c, idProduct=2003 [ 3.281966] usb 1-8.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.281970] usb 1-8.3: Product: Dell USB Keyboard [ 3.281973] usb 1-8.3: Manufacturer: Dell [ 3.282096] usb 1-8.3: configuration #1 chosen from 1 choice [ 3.324446] usbcore: registered new interface driver hiddev [ 3.328123] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8.3/1-8.3:1.0/input/input1 [ 3.328208] generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.7-8.3/input0 [ 3.328230] usbcore: registered new interface driver usbhid [ 3.328233] usbhid: v2.6:USB HID core driver [ 3.356095] usb 1-8.7: new low speed USB device using ehci_hcd and address 6 [ 3.451960] usb 1-8.7: New USB device found, idVendor=413c, idProduct=3012 [ 3.451966] usb 1-8.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.451969] usb 1-8.7: Product: Dell USB Optical Mouse [ 3.451973] usb 1-8.7: Manufacturer: Dell [ 3.452111] usb 1-8.7: configuration #1 chosen from 1 choice [ 3.454397] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8.7/1-8.7:1.0/input/input2 [ 3.454475] generic-usb 0003:413C:3012.0002: input,hidraw1: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1d.7-8.7/input0 [ 3.530018] usb 2-2.3: new full speed USB device using uhci_hcd and address 3 [ 3.658019] usb 2-2.3: New USB device found, idVendor=0b97, idProduct=7761 [ 3.658025] usb 2-2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.658159] usb 2-2.3: configuration #1 chosen from 1 choice [ 3.661054] hub 2-2.3:1.0: USB hub found [ 3.663011] hub 2-2.3:1.0: 3 ports detected [ 3.742021] usb 2-2.4: new full speed USB device using uhci_hcd and address 4 [ 3.879025] usb 2-2.4: New USB device found, idVendor=413c, idProduct=8140 [ 3.879030] usb 2-2.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.879163] usb 2-2.4: configuration #1 chosen from 1 choice [ 3.958027] usb 2-2.3.2: new full speed USB device using uhci_hcd and address 5 [ 4.080028] usb 2-2.3.2: New USB device found, idVendor=0b97, idProduct=7762 [ 4.080034] usb 2-2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.080038] usb 2-2.3.2: Product: O2Micro CCID SC Reader [ 4.080041] usb 2-2.3.2: Manufacturer: O2 [ 4.080187] usb 2-2.3.2: configuration #1 chosen from 1 choice [ 8.160269] usb-storage: device scan complete [ 8.161540] scsi 0:0:0:0: CD-ROM HL-DT-ST CDRW/DVD GCC4247 A102 PQ: 0 ANSI: 0 [ 15.983983] tg3 0000:09:00.0: irq 28 for MSI/MSI-X [ 16.017184] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.064394] tg3 0000:09:00.0: PME# enabled [ 16.064411] tg3 0000:09:00.0: wake-up capability enabled by ACPI [ 16.081265] iwl3945 0000:0c:00.0: firmware: requesting iwlwifi-3945-2.ucode [ 16.083663] iwl3945 0000:0c:00.0: iwlwifi-3945-2.ucode firmware file req failed: -2 [ 16.083669] iwl3945 0000:0c:00.0: firmware: requesting iwlwifi-3945-1.ucode [ 16.087189] iwl3945 0000:0c:00.0: iwlwifi-3945-1.ucode firmware file req failed: -2 [ 16.087194] iwl3945 0000:0c:00.0: Could not read microcode: -2 [ 22.139923] Floppy drive(s): fd0 is 1.44M [ 25.152016] floppy0: no floppy controllers found [ 30.182334] Floppy drive(s): fd0 is 1.44M [ 33.196016] floppy0: no floppy controllers found [ 33.464462] iwl3945 0000:0c:00.0: PCI INT A disabled [ 33.488203] cfg80211: Using static regulatory domain info [ 33.488206] cfg80211: Regulatory domain: US [ 33.488208] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 33.488213] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 33.488217] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 33.488221] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 33.488224] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 33.488228] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 33.488232] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 33.488472] cfg80211: Calling CRDA for country: US [ 33.539216] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks [ 33.539220] iwl3945: Copyright(c) 2003-2009 Intel Corporation [ 33.539300] iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 33.539322] iwl3945 0000:0c:00.0: setting latency timer to 64 [ 33.595382] iwl3945 0000:0c:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels [ 33.595386] iwl3945 0000:0c:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 33.595533] iwl3945 0000:0c:00.0: irq 27 for MSI/MSI-X [ 33.596447] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 33.599321] tg3 0000:09:00.0: wake-up capability disabled by ACPI [ 33.599368] tg3 0000:09:00.0: PME# disabled [ 33.612105] tg3 0000:09:00.0: irq 28 for MSI/MSI-X [ 33.645296] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 33.692393] tg3 0000:09:00.0: PME# enabled [ 33.692407] tg3 0000:09:00.0: wake-up capability enabled by ACPI [ 33.709260] iwl3945 0000:0c:00.0: firmware: requesting iwlwifi-3945-2.ucode [ 33.711597] iwl3945 0000:0c:00.0: iwlwifi-3945-2.ucode firmware file req failed: -2 [ 33.711603] iwl3945 0000:0c:00.0: firmware: requesting iwlwifi-3945-1.ucode [ 33.715159] iwl3945 0000:0c:00.0: iwlwifi-3945-1.ucode firmware file req failed: -2 [ 33.715163] iwl3945 0000:0c:00.0: Could not read microcode: -2 [ 43.348112] usb 1-8.2: new high speed USB device using ehci_hcd and address 7 [ 43.440855] usb 1-8.2: New USB device found, idVendor=08ec, idProduct=0016 [ 43.440859] usb 1-8.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 43.440863] usb 1-8.2: Product: U3 [ 43.440865] usb 1-8.2: Manufacturer: Intuix [ 43.440868] usb 1-8.2: SerialNumber: 0E40736122C0A8BD [ 43.441000] usb 1-8.2: configuration #1 chosen from 1 choice [ 43.443440] scsi1 : SCSI emulation for USB Mass Storage devices [ 43.443911] usb-storage: device found at 7 [ 43.443914] usb-storage: waiting for device to settle before scanning [ 48.440325] usb-storage: device scan complete [ 48.440810] scsi 1:0:0:0: Direct-Access Intuix U3 6.16 PQ: 0 ANSI: 0 CCS [ 48.441177] scsi 1:0:0:1: CD-ROM Intuix U3 6.16 PQ: 0 ANSI: 0 [ 48.453915] sd 1:0:0:0: [sda] 1996799 512-byte logical blocks: (1.02 GB/974 MiB) [ 48.454408] sd 1:0:0:0: [sda] Write Protect is off [ 48.454412] sd 1:0:0:0: [sda] Mode Sense: 45 00 00 08 [ 48.454415] sd 1:0:0:0: [sda] Assuming drive cache: write through [ 48.456126] sd 1:0:0:0: [sda] Assuming drive cache: write through [ 48.456132] sda: [ 48.458408] sd 1:0:0:0: [sda] Assuming drive cache: write through [ 48.458412] sd 1:0:0:0: [sda] Attached SCSI removable disk [ 50.795559] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 50.817557] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 50.897809] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 50.909557] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 55.941984] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 55.953482] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 55.964682] Floppy drive(s): fd0 is 1.44M [ 58.980016] floppy0: no floppy controllers found [ 59.248452] iwl3945 0000:0c:00.0: PCI INT A disabled [ 59.272201] cfg80211: Using static regulatory domain info [ 59.272205] cfg80211: Regulatory domain: US [ 59.272207] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 59.272211] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 59.272215] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 59.272219] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 59.272223] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 59.272227] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 59.272230] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 59.272467] cfg80211: Calling CRDA for country: US [ 59.323447] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks [ 59.323451] iwl3945: Copyright(c) 2003-2009 Intel Corporation [ 59.323532] iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 59.323553] iwl3945 0000:0c:00.0: setting latency timer to 64 [ 59.379622] iwl3945 0000:0c:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels [ 59.379626] iwl3945 0000:0c:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 59.379772] iwl3945 0000:0c:00.0: irq 27 for MSI/MSI-X [ 59.380665] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 59.383528] tg3 0000:09:00.0: wake-up capability disabled by ACPI [ 59.383575] tg3 0000:09:00.0: PME# disabled [ 59.396104] tg3 0000:09:00.0: irq 28 for MSI/MSI-X [ 59.429326] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 59.476393] tg3 0000:09:00.0: PME# enabled [ 59.476406] tg3 0000:09:00.0: wake-up capability enabled by ACPI [ 59.493260] iwl3945 0000:0c:00.0: firmware: requesting iwlwifi-3945-2.ucode [ 59.496586] iwl3945 0000:0c:00.0: loaded firmware version 15.32.2.9 [ 59.564287] Registered led device: iwl-phy0::radio [ 59.564580] Registered led device: iwl-phy0::assoc [ 59.564787] Registered led device: iwl-phy0::RX [ 59.564986] Registered led device: iwl-phy0::TX [ 59.566869] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 60.603594] tg3 0000:09:00.0: wake-up capability disabled by ACPI [ 60.603642] tg3 0000:09:00.0: PME# disabled [ 60.616105] tg3 0000:09:00.0: irq 28 for MSI/MSI-X [ 60.649281] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 63.700395] tg3 0000:09:00.0: PME# enabled [ 63.700412] tg3 0000:09:00.0: wake-up capability enabled by ACPI [ 63.784248] Registered led device: iwl-phy0::radio [ 63.784521] Registered led device: iwl-phy0::assoc [ 63.784725] Registered led device: iwl-phy0::RX [ 63.784924] Registered led device: iwl-phy0::TX [ 63.786679] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 73.612528] usb 1-8.2: USB disconnect, address 7 [ 100.428247] Registered led device: iwl-phy0::radio [ 100.428521] Registered led device: iwl-phy0::assoc [ 100.428725] Registered led device: iwl-phy0::RX [ 100.428925] Registered led device: iwl-phy0::TX [ 100.430694] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 103.045986] iwl3945 0000:0c:00.0: Failed to get channel info for channel 1 [1] [ 103.048057] wlan0: direct probe to AP f8:1e:df:fa:d0:ec (try 1) [ 103.048896] wlan0: direct probe responded [ 103.048900] wlan0: authenticate with AP f8:1e:df:fa:d0:ec (try 1) [ 103.049403] wlan0: authenticated [ 103.054621] wlan0: associate with AP f8:1e:df:fa:d0:ec (try 1) [ 103.059319] wlan0: RX AssocResp from f8:1e:df:fa:d0:ec (capab=0x511 status=0 aid=1) [ 103.059323] wlan0: associated [ 103.061191] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 103.061304] cfg80211: Calling CRDA for country: FR [ 104.079431] wlan0: deauthenticating from f8:1e:df:fa:d0:ec by local choice (reason=1) [ 111.749107] wlan0: direct probe to AP f8:1e:df:fa:d0:ec (try 1) [ 111.749916] wlan0: direct probe responded [ 111.749920] wlan0: authenticate with AP f8:1e:df:fa:d0:ec (try 1) [ 111.750395] wlan0: authenticated [ 111.750407] wlan0: associate with AP f8:1e:df:fa:d0:ec (try 1) [ 111.755099] wlan0: RX AssocResp from f8:1e:df:fa:d0:ec (capab=0x511 status=0 aid=1) [ 111.755103] wlan0: associated [ 112.768984] wlan0: deauthenticating from f8:1e:df:fa:d0:ec by local choice (reason=1) [ 113.156009] wlan0: no IPv6 routers present [ 120.348818] wlan0: direct probe to AP f8:1e:df:fa:d0:ec (try 1) [ 120.349626] wlan0: direct probe responded [ 120.349630] wlan0: authenticate with AP f8:1e:df:fa:d0:ec (try 1) [ 120.350067] wlan0: authenticated [ 120.350079] wlan0: associate with AP f8:1e:df:fa:d0:ec (try 1) [ 120.354775] wlan0: RX AssocResp from f8:1e:df:fa:d0:ec (capab=0x511 status=0 aid=1) [ 120.354778] wlan0: associated [ 121.368871] wlan0: deauthenticating from f8:1e:df:fa:d0:ec by local choice (reason=1) [ 129.055026] wlan0: direct probe to AP f8:1e:df:fa:d0:ec (try 1) [ 129.055839] wlan0: direct probe responded [ 129.055842] wlan0: authenticate with AP f8:1e:df:fa:d0:ec (try 1) [ 129.056317] wlan0: authenticated [ 129.056330] wlan0: associate with AP f8:1e:df:fa:d0:ec (try 1) [ 129.061025] wlan0: RX AssocResp from f8:1e:df:fa:d0:ec (capab=0x511 status=0 aid=1) [ 129.061029] wlan0: associated [ 130.078617] wlan0: deauthenticating from f8:1e:df:fa:d0:ec by local choice (reason=1) [ 137.654725] wlan0: direct probe to AP f8:1e:df:fa:d0:ec (try 1) [ 137.655557] wlan0: direct probe responded [ 137.655561] wlan0: authenticate with AP f8:1e:df:fa:d0:ec (try 1) [ 137.656076] wlan0: authenticated [ 137.656089] wlan0: associate with AP f8:1e:df:fa:d0:ec (try 1) [ 137.660786] wlan0: RX AssocResp from f8:1e:df:fa:d0:ec (capab=0x511 status=0 aid=1) [ 137.660790] wlan0: associated [ 138.668447] wlan0: deauthenticating from f8:1e:df:fa:d0:ec by local choice (reason=1) [ 146.258550] wlan0: direct probe to AP f8:1e:df:fa:d0:ec (try 1) [ 146.259359] wlan0: direct probe responded [ 146.259362] wlan0: authenticate with AP f8:1e:df:fa:d0:ec (try 1) [ 146.259800] wlan0: authenticated [ 146.259812] wlan0: associate with AP f8:1e:df:fa:d0:ec (try 1) [ 146.264562] wlan0: RX AssocResp from f8:1e:df:fa:d0:ec (capab=0x511 status=0 aid=1) [ 146.264566] wlan0: associated [ 147.288257] wlan0: deauthenticating from f8:1e:df:fa:d0:ec by local choice (reason=1) [ 154.858234] wlan0: direct probe to AP f8:1e:df:fa:d0:ec (try 1) [ 154.859043] wlan0: direct probe responded [ 154.859047] wlan0: authenticate with AP f8:1e:df:fa:d0:ec (try 1) [ 154.859490] wlan0: authenticated [ 154.859502] wlan0: associate with AP f8:1e:df:fa:d0:ec (try 1) [ 154.864200] wlan0: RX AssocResp from f8:1e:df:fa:d0:ec (capab=0x511 status=0 aid=1) [ 154.864204] wlan0: associated [ 155.878082] wlan0: deauthenticating from f8:1e:df:fa:d0:ec by local choice (reason=1) [ 163.564442] wlan0: direct probe to AP f8:1e:df:fa:d0:ec (try 1) [ 163.565254] wlan0: direct probe responded [ 163.565258] wlan0: authenticate with AP f8:1e:df:fa:d0:ec (try 1) [ 163.565720] wlan0: authenticated [ 163.565733] wlan0: associate with AP f8:1e:df:fa:d0:ec (try 1) [ 163.570454] wlan0: RX AssocResp from f8:1e:df:fa:d0:ec (capab=0x511 status=0 aid=1) [ 163.570457] wlan0: associated [ 164.609387] wlan0: deauthenticating from f8:1e:df:fa:d0:ec by local choice (reason=1) [ 172.164162] wlan0: direct probe to AP f8:1e:df:fa:d0:ec (try 1) [ 172.164994] wlan0: direct probe responded [ 172.164997] wlan0: authenticate with AP f8:1e:df:fa:d0:ec (try 1) [ 172.165439] wlan0: authenticated [ 172.165451] wlan0: associate with AP f8:1e:df:fa:d0:ec (try 1) [ 172.170147] wlan0: RX AssocResp from f8:1e:df:fa:d0:ec (capab=0x511 status=0 aid=1) [ 172.170151] wlan0: associated [ 173.177836] wlan0: deauthenticating from f8:1e:df:fa:d0:ec by local choice (reason=1) [ 180.870378] wlan0: direct probe to AP f8:1e:df:fa:d0:ec (try 1) [ 180.871185] wlan0: direct probe responded [ 180.871188] wlan0: authenticate with AP f8:1e:df:fa:d0:ec (try 1) [ 180.871626] wlan0: authenticated [ 180.871638] wlan0: associate with AP f8:1e:df:fa:d0:ec (try 1) [ 180.876370] wlan0: RX AssocResp from f8:1e:df:fa:d0:ec (capab=0x511 status=0 aid=1) [ 180.876374] wlan0: associated [ 181.887598] wlan0: deauthenticating from f8:1e:df:fa:d0:ec by local choice (reason=1)
