Gaudenz Steinlin <[EMAIL PROTECTED]> writes: > Am Die, den 20.01.2004 schrieb Goswin von Brederlow um 11:39: > > Gaudenz Steinlin <[EMAIL PROTECTED]> writes: > > > Ok, the autobuilders should handle them then. Did you put a Closes > > into the changelog? > Yes, of course. They are listed as resolved on b.d.o > > > > > Does m68k have one of these buses: ata, pci, pcmcia or usb? If none of > > > the are present on m68k then we could exclude this arch because discover > > > would be useless. > > > > > > Gaudenz > > > > Many m68k have ata, some pcmcia and a very few pci. Don't think any > > usb devices exist but you could have one for pci. > > > > But the module names differ. > The module names for the buses differ or the module names for the same > (same id) on these buses differ? Only the latter is a problem. Discover > does not take care of the former by itself. > > Gaudenz
It would be good if you could add zorro support to discover, since thats the main bus on amigas. Not sure what atari/mac has though. % cat /proc/bus/zorro/devices 00 08490100 00e90000 00010000 c1 01 21404300 40000000 10000000 84 02 21406400 00f00d44 00010000 d2 % lszorro 00: Hydra Systems Amiganet [Ethernet Card] 01: Phase 5 CyberVision64-3D [Graphics Card] 02: Phase 5 CyberStorm Mk III [Accelerator and SCSI Host Adapter] You can look at lszorro for device names and types. Shouldn't be to hard to add support. MfG Goswin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]