Package: installation-reports Debian-installer-version: <2004-03-17, http://gluck.debian.org/cdimage/testing/sarge_d-i/i386/beta3/sarge-i386-netinst.iso>
uname -a: < > Date: <2004-03-18 0800GMT> Method: <Boot from CD/RW sarge-i386-netinstal> Machine: <ASUS P4PE, SATA, IEEE 1394, GB LAN> Processor: P4, 533, 2.4GHz Memory: 2x512 DDR 333 Root Device: <IDE, /dev/hdb3 12G of 80G Maxtor> Root Size/partition table: < > Output of lspci: 00:00.0 Host bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset Host Bridge (rev 02) 00:01.0 PCI bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset AGP Bridge (rev 02) 00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 02) 00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 02) 00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 02) 00:1d.7 USB Controller: Intel Corp. 82801DB USB2 (rev 02) 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev 82) 00:1f.0 ISA bridge: Intel Corp. 82801DB LPC Interface Controller (rev 02) 00:1f.1 IDE interface: Intel Corp. 82801DB Ultra ATA Storage Controller (rev 02) 00:1f.5 Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio Controller (rev 02) 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 If [Radeon 9000] (rev 01) 01:00.1 Display controller: ATI Technologies Inc Radeon R250 [Radeon 9000] (Secondary) (rev 01) 02:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) 02:05.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5702 Gigabit Ethernet (rev 02) 02:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 02) 02:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 02) Base System Installation Checklist: Initial boot worked: [O] Configure network HW: [E] Config network: [ ] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: d-i detects NIC and tries correct module tg3. However, "modprobe -v tg3" results in "no hardware found" with sarge-i386-netinst.iso (beta3). tg3 works fine with Knoppix/SuSE/sarge-i386-businesscard.iso (beta3). I could net-install with businesscard. btw: bcm5700 also works fine. best regards Markus Haiml
