* Haiml, Markus <[EMAIL PROTECTED]> [2004-03-18 08:17]: > Machine: <ASUS P4PE, SATA, IEEE 1394, GB LAN>
Your installation report mentioned that you're using a machine with SATA disks. Since the last beta of debian-installer was released, a large number of changes related to SATA have been made. In particular, we now ship a 2.4.26 kernel with (some) SATA support. We're currently preparing a new test release of debian-installer (release candidate 1), and we'd appreciate it if you could try our daily image and tell us whether this works. This will give us some time to make important changes if so requires before rc1 is released. You can find current images at http://gluck.debian.org/cdimage/testing/sarge_d-i/ We'd appreciate it if you could test this image and tell us if the issues you mentioned in your bug report have been dealt with, and in particular whether your SATA disks are recognized and work. You can either boot normally (by pressing enter or typing "linux") and will get a 2.4.26 kernel with SATA, or you can type "linux26" and get a 2.6 kernel; both should work, and we'd appreciate feedback about both of them. Thanks > d-i detects NIC and tries correct module tg3. However, "modprobe -v > tg3" results in "no hardware found" with sarge-i386-netinst.iso > (beta3). Can you try the daily image and check if this works? If not, can you show me the output of the kernel when you load the tg3 module (this will show what chip you have exactly). -- Martin Michlmayr [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
