Package: installation-reports Version: beta 3 Severity: grave Justification: renders package unusable
Debian-installer-version: http://gluck.debian.org/cdimage/testing/sarge_d-i/ia64/beta3/sarge-ia64-netinst.iso uname -a: todd 2.4.20-mckinley-smp #1 SMP Tue Dec 9 17:04:43 MST 2003 ia64 unknown Date: Tue, 30 Mar 2004 9:52:29 -0500 Method: boot from IDE CD-ROM Machine: HP rx2600 Processor: 2x Itanium2 Memory: 12GB Root Device: SCSI sda Root Size/partition table: N/A Output of lspci: 00:01.0 USB Controller: NEC Corporation USB (rev 41) 00:01.1 USB Controller: NEC Corporation USB (rev 41) 00:01.2 USB Controller: NEC Corporation: Unknown device 00e0 (rev 02) 00:02.0 IDE interface: CMD Technology Inc PCI0649 (rev 02) 00:03.0 Ethernet controller: Intel Corp. 82557 [Ethernet Pro 100] (rev 0d) 00:1c.0 Host bridge: Hewlett-Packard Company: Unknown device 122e (rev 32) 00:1d.0 Bridge: Hewlett-Packard Company: Unknown device 122a (rev 22) 00:1e.0 Bridge: Hewlett-Packard Company: Unknown device 1229 (rev 22) 20:01.0 SCSI storage controller: LSI Logic / Symbios Logic (formerly NCR) 53c1030 (rev 07) 20:01.1 SCSI storage controller: LSI Logic / Symbios Logic (formerly NCR) 53c1030 (rev 07) 20:02.0 Ethernet controller: BROADCOM Corporation NetXtreme BCM5701 Gigabit Ethernet (rev 15) 20:1e.0 Host bridge: Hewlett-Packard Company: Unknown device 122e (rev 32) 40:01.0 SCSI storage controller: LSI Logic / Symbios Logic (formerly NCR) 53c1010 66MHz Ultra3 SCSI Adapter (rev 01) 40:01.1 SCSI storage controller: LSI Logic / Symbios Logic (formerly NCR) 53c1010 66MHz Ultra3 SCSI Adapter (rev 01) 40:1e.0 Host bridge: Hewlett-Packard Company: Unknown device 122e (rev 32) 60:1e.0 Host bridge: Hewlett-Packard Company: Unknown device 122e (rev 32) 80:1e.0 Host bridge: Hewlett-Packard Company: Unknown device 122e (rev 32) c0:1e.0 Host bridge: Hewlett-Packard Company: Unknown device 122e (rev 32) e0:01.0 Communication controller: Hewlett-Packard Company: Unknown device 1290 (rev 01) e0:01.1 Serial controller: Hewlett-Packard Company: Unknown device 1048 (rev 03)e0:02.0 VGA compatible controller: ATI Technologies Inc Radeon VE QY e0:1e.0 Host bridge: Hewlett-Packard Company: Unknown device 122e (rev 32) Base System Installation Checklist: Initial boot worked: [E] Configure network HW: [ ] Config network: [ ] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: The CD did not autoboot, but I didn't expect it to. After selecting the CD drive from the EFI menu and running elilo, the installer started and I was presented with the initial menu prompting me to select a language. I could not select a language since the keyboard was non-responsive. HP rx2600's only have USB (no PS/2) ports and the USB keyboard support was not available on the ISO I tested. Perhaps the hardware detection could be run earlier to get around this issue. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
