Package: installation-reports Debian-installer-version: Daily ISO built on 20040511 netinst uname -a: Linux othala 2.4.26-sparc32 #1 Sat Apr 24 00:12:33 EDT 2004 sparc GNU/Linux Date: Fri May 14 12:32:31 CEST 2004 Method: I put the CDROM in the drive. Yeah, I did it ! Stop-A ok boot cdrom boot: linux No problem during installation, packages were downloaded from CDROM.
Machine: Sun SparcStation 5 Processor: TurboSparc 170 MHz cpu : Fujitsu TurboSparc MB86907 fpu : reserved promlib : Version 3 Revision 2 prom : 2.29 type : sun4m ncpus probed : 1 ncpus active : 1 BogoMips : 169.57 MMU type : Fujitsu TurboSparc contexts : 256 nocache total : 1048576 nocache used : 132608 Memory: 64 Mo Root Device: SCSI scsi0 : Sparc ESP100A-FAST scsi1 : Sparc ESP236-FAST Vendor: IBM Model: DCAS32160SUN2.1G Rev: S65A Type: Direct-Access ANSI SCSI revision: 02 Vendor: TOSHIBA Model: XM5701TASUN12XCD Rev: 2395 Type: CD-ROM ANSI SCSI revision: 02 Root Size/partition table: Device Flag Start End Blocks Id System /dev/sda1 0 71 147467 1 Boot /dev/sda2 71 447 780952 83 Linux native /dev/sda3 0 1017 2112309 5 Whole disk /dev/sda4 447 917 976190 83 Linux native /dev/sda5 ur 917 964 97619 83 Linux native /dev/sda6 u 964 1017 110081 82 Linux swap Output of lspci: No PCI :-) Base System Installation Checklist: Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [ ] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: I did not have any problem, only some warning during boot of the CDROM about unimplemented SPARC instruction. -- Julien Danjou .''`. Debian developer : :' : http://jdanjou.org `. `' http://people.debian.org/~acid `- 9A0D 5FD9 EB42 22F6 8974 C95C A462 B51E C2FE E5CD -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
