Package: installation-reports Debian-installer-version: Beta 4, May 10 2004 from http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/sparc/beta4/sarge-sparc-netinst.iso uname -a: I did not get a shell promt Date: May 11 2004 Method: scsi cdrom
Machine: Sun Ultra 1 Processor: UltraSPARC 143MHz Memory: 64 MB Root Device: Root Size/partition table: I did not get that far Output of lspci: no shell Base System Installation Checklist: Initial boot worked: [E] Configure network HW: [ ] Config network: [ ] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: While booting the following message appears: Trying to move old root to /initrd ... okay Mounted devfs on /dev attempt to acces beyond end of device 01:00: rw=0, want=4097, limit=4096 attempt to acces beyond end of device 01:00: rw=0, want=4098, limit=4096 attempt to acces beyond end of device 01:00: rw=0, want=4099, limit=4096 attempt to acces beyond end of device 01:00: rw=0, want=4100, limit=4096 Kernel panic: No init found. Try passing init= option to kernel Pres L1-A to return to the boot prom booting with "linux init=/bin/sh" did not work. Using the option "devfs=mount rw" also was without success. At last I tried "linux root=/dev/rd/0 rw" with the same result. Your Nick Kepper -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
