Package: installation-reports
Debian-installer-version: <RC1, 2004-08-12>
uname -a: <Linux shadowserve 2.4.26-1-686 #1 Thu Jul 22 13:00:49 JST 2004 i686 GNU/Linux>
Date: <Fri Aug 13 01:18:51 EEST 2004>
Method: <netinst CD, normal install, defaults>
Machine: <HP Vectra VLi8> Processor: 500 MHz PIII Memory: 512 SDRAM Root Device: <80 Gb IDE, /dev/hda> Root Size/partition table: < /dev/hda2 1,8G 313M 1,4G 19% / tmpfs 126M 0 126M 0% /dev/shm /dev/hda1 30M 6,8M 22M 25% /boot /dev/hda4 73G 33G 37G 48% /opt /dev/hdb1 38G 18G 21G 46% /home/teta /dev/hdc1 38G 18G 21G 46% /opt/backup/teta > Output of lspci:
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
0000:00:04.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:04.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:04.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:04.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
0000:00:10.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 24)
0000:01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200 AGP (rev 03)
Base System Installation Checklist:
Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
<I didn't get to choose which kernel would be installed. That probably required booting with linux26 or expert. The kernel installed was ok, but for 386. Autodetect my 686 so I don't have install it later (ok I know, CD space limited). The questions asked were good; not too many, irrelevant or difficult. A control freak like me should have used expert, but I wanted to see how easy it can get. Thank you guys!>
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
