Thanks Martin.
I had installed the kernel-image-2.2.20-idepci because it was said:
"This version of the kernel image package only has ide and PCI device support"
I believed: this _version only_ has ide and pci device support (and I need it), not this version _has only_ ide and PCI device support (and not other things I need).
I installed the 2.2.20 kernel, and ipchains is now supported by the kernel and up and running.
However, I have now the same problem as I described with kernel 2.40 :(
If I put all policies (input, output, forward) to ACCEPT and add only one accept rule with logging enabled, I see a lot of activity passing through ipchains, but not going anywhere though.
(Ping hangs, frees or whatever, and produces 100% packet losts, on my internal and external/dmz network)
Seems that the problem is not related to ipchains. Could it be routing, some wrong network configuration that was ignored before due to the lack of network kernel support that is now active? (ip forwarding is enabled).
Pierre A.
From: Martin Bock <[EMAIL PROTECTED]> To: [email protected] Subject: Re: no ipchains with 2.2/no network with 2.4 Date: Sat, 8 Jan 2005 11:00:45 +0100
Pierre,
I just checked my old Woody box. I have the following modules loaded:
$ lsmod Module Size Used by ip_masq_autofw 2488 0 (unused) ip_masq_ftp 3584 0 (unused) rtl8139 11348 0 (unused) af_packet 6152 0 (unused) unix 11352 0 (autoclean)
correspondingly:
$ cat /etc/modules # /etc/modules: kernel modules to load at boot time. # # This file should contain the names of kernel modules that are # to be loaded at boot time, one per line. Comments begin with # a `#', and everything on the line after them are ignored. unix af_packet rtl8139 ip_masq_ftp ip_masq_autofw
with this configuration, I can, e.g.:
$ ipchains -P input DENY
without complaints. Though others have pointed out how to find documentation to compile your kernel, compiling is not necessary if you have reasonable distribution kernels installed. Which route you like better is up to you ...
Good luck, mab
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
_________________________________________________________________ Free e-mail? Try MSN Hotmail ! http://www.hotmail.com
