I assume this is the place where I should be requesting approval to upload rocm-hipamd 5.7.1-7+deb14u1 to testing-proposed-updates. If I should be using another format or sending it elsewhere, please let me know and I will make the correction.
[ Reason ] This update fixes #1118618, which is an incompatibility between newer versions of libhsa-runtime-1 and libamdhip64-5, as well as between libhsa-runtime-1 and rocm-opencl-icd. Newer versions of libhsa-runtime-1 reflect this by including a Breaks declaration for libamdhip64-5 and older versions of rocm-opencl-icd, but this is making the transition to libamdhip64-6 difficult. This fix to libamdhip64-5 would allow the upload of a new version of libhsa-runtime-1 with a maximum version on the breaks declaration, thereby allowing libhsa-runtime-1 to migrate to testing and unblocking src:rocm-hipamd. This update also fixes missing dependencies in the rocm-hipamd autopkgtests. The autopkgtests invoke clang++-17 but the clang-17 package was only installed because hipcc depended on it. The rocm-hipamd autopkgtests thus begun to fail when hipcc updated its dependency on clang-17 to clang-21. The clang-17 functionality being tested by the rocm-hipamd autopkgtests works even after hipcc is updated to clang-21, as long as clang-17 is actually installed. [ Impact ] The libhsa-runtime-1, libamdhip64-5 and rocm-opencl-icd packages are dependencies of nearly all packages on testing maintained by the Debian ROCm Team. The incompatibility makes it difficult to compare old and new versions of packages, and has made the transition very disruptive. [ Tests ] I've used librocsparse1-tests as the test for libamdhip64-5 and clpeak as the test for rocm-opencl-icd. I've attached a test log (edited for length) that shows that the updated src:rocm-hipamd package works on testing with existing package versions, will continue to work on testing once libhsa-runtime-1 updates its breaks annotations in a new upload (planned for src:rocr-runtime 6.4.3+dfsg-5). I then do a quick sanity check showing that these tests crashed when using the existing version of libamdhip64-5/rocm-opencl-icd on testing together with libhsa-runtime-1 6.4.3+dfsg from before the breaks annotations were added. Then, I update only libamdhip64-5 and rocm-opencl-icd with this proposed change to show that this change fixes the original justification for the breakage. [ Risks ] This change is small and the package version will quickly be replaced when the src:rocm-hipamd transition is completed. As shown by the attached debdiff, this change is the removal of an unnecessary check (using a patch backported from upstream) and the explicit declaration a dependency on clang-17 packages added to the d/t/control file. [ Checklist ] [x]*all* changes are documented in the d/changelog [x] I reviewed all changes and I approve them [x] attach debdiff against the package in testing [x] the issue is verified as fixed in unstable [ Changes ] * Add clang-17 and rocm-device-libs-17 to Depends in d/t/control * Add d/p/0042-support-generic-isas.patch to remove a check that the current device only supports one ISA Sincerely, Cory Bloor
diff -Nru rocm-hipamd-5.7.1/debian/changelog rocm-hipamd-5.7.1/debian/changelog --- rocm-hipamd-5.7.1/debian/changelog 2025-10-04 02:33:54.000000000 -0600 +++ rocm-hipamd-5.7.1/debian/changelog 2025-11-27 19:05:43.000000000 -0700 @@ -1,3 +1,14 @@ +rocm-hipamd (5.7.1-7+deb14u1) forky; urgency=medium + + * Add clang-17 and rocm-device-libs-17 to autopkgtest dependencies + to ensure that the tests that invoke clang++-17 will continue to + pass once all rocm-hipamd dependencies have been updated to newer + versions of clang + * Add d/p/0042-support-generic-isas.patch to fix incompatibility + with libhsa-runtime64-1 (>= 6.4.3+dfsg-1) (Closes: #1118618) + + -- Cordell Bloor <[email protected]> Thu, 27 Nov 2025 19:05:43 -0700 + rocm-hipamd (5.7.1-7) unstable; urgency=medium * Add d/p/0041-inline-bf16-functions.patch to mark functions defined diff -Nru rocm-hipamd-5.7.1/debian/patches/0042-support-generic-isas.patch rocm-hipamd-5.7.1/debian/patches/0042-support-generic-isas.patch --- rocm-hipamd-5.7.1/debian/patches/0042-support-generic-isas.patch 1969-12-31 17:00:00.000000000 -0700 +++ rocm-hipamd-5.7.1/debian/patches/0042-support-generic-isas.patch 2025-11-27 19:05:43.000000000 -0700 @@ -0,0 +1,30 @@ +commit 3387f48b5625a214bdfc1778ed080abaa5fc6504 +Author: Konstantin Zhuravlyov <[email protected]> +Date: Wed Oct 30 15:33:36 2024 -0400 + + SWDEV-428601 - Don't enforce 1 isa per device in rocm backend + + - Device can have multiple isas as per HSA spec + - First isa is most specific one, so this change is sort of a NOP + + Change-Id: Ib332af21745f2e6a7c25db8986bf7717501059bc + +Applied-Upstream: https://github.com/ROCm/clr/commit/3387f48b5625a214bdfc1778ed080abaa5fc6504 +Debian-Bug: https://bugs.debian.org/1118618 +diff --git a/rocclr/device/rocm/rocdevice.cpp b/rocclr/device/rocm/rocdevice.cpp +index 648dfd217..75687e755 100644 +--- a/rocclr/device/rocm/rocdevice.cpp ++++ b/rocclr/device/rocm/rocdevice.cpp +@@ -674,11 +674,6 @@ bool Device::create() { + pciDeviceId_); + return false; + } +- if (agent_isas.count != 1) { +- LogPrintfError("HSA device %s (PCI ID %x) has %u ISAs but can only support a single ISA", +- agent_name, pciDeviceId_, agent_isas.count); +- return false; +- } + + uint32_t isa_name_length = 0; + if (HSA_STATUS_SUCCESS != + diff -Nru rocm-hipamd-5.7.1/debian/patches/series rocm-hipamd-5.7.1/debian/patches/series --- rocm-hipamd-5.7.1/debian/patches/series 2025-10-04 00:30:45.000000000 -0600 +++ rocm-hipamd-5.7.1/debian/patches/series 2025-11-27 19:05:43.000000000 -0700 @@ -21,3 +21,4 @@ 0039-fix-roc-obj-help.patch 0040-self-sufficient-bf16-header.patch 0041-inline-bf16-functions.patch +0042-support-generic-isas.patch diff -Nru rocm-hipamd-5.7.1/debian/tests/control rocm-hipamd-5.7.1/debian/tests/control --- rocm-hipamd-5.7.1/debian/tests/control 2025-10-03 01:13:13.000000000 -0600 +++ rocm-hipamd-5.7.1/debian/tests/control 2025-11-27 19:05:43.000000000 -0700 @@ -1,3 +1,3 @@ Tests: clang, cmake-hip-config, cmake-hip-lang, g++, gcc, hipconfig, hipcc -Depends: @, cmake, make, gcc, g++, rocminfo (>= 5.7.1~) +Depends: @, cmake, make, gcc, g++, rocminfo (>= 5.7.1~), clang-17, rocm-device-libs-17 Restrictions: superficial, skippable
cgmb@scorbunny:~/builds/rocm-hipamd$ docker run -it --device=/dev/dri --device=/dev/kfd --security-opt seccomp=unconfined --group-add=video --group-add=$(getent group render | cut -d: -f3) --volume $HOME:/mnt/home debian:testing root@94627f0cc2a9:/# cd ~ root@94627f0cc2a9:~# apt update && apt install rocminfo Get:1 http://deb.debian.org/debian testing InRelease [148 kB] Get:2 http://deb.debian.org/debian testing-updates InRelease [45.1 kB] Get:3 http://deb.debian.org/debian-security testing-security InRelease [43.4 kB] Get:4 http://deb.debian.org/debian testing/main amd64 Packages [9683 kB] Fetched 9920 kB in 1s (10.5 MB/s) 4 packages can be upgraded. Run 'apt list --upgradable' to see them. Installing: rocminfo Installing dependencies: ca-certificates libdrm-common libexpat1 libhsa-runtime64-1 libncursesw6 libpython3-stdlib libreadline8t64 netbase pciutils python3.13 kmod libdrm2 libffi8 libhsakmt1 libnuma1 libpython3.13-minimal libsqlite3-0 openssl python3 python3.13-minimal libdrm-amdgpu1 libelf1t64 libgpm2 libkmod2 libpci3 libpython3.13-stdlib media-types pci.ids python3-minimal readline-common Suggested packages: gpm bzip2 wget | curl | lynx python3-doc python3-tk python3-venv python3.13-venv python3.13-doc binutils binfmt-support readline-doc Summary: Upgrading: 0, Installing: 31, Removing: 0, Not Upgrading: 4 Download size: 10.7 MB Space needed: 36.9 MB / 764 GB available Continue? [Y/n] y Get:1 http://deb.debian.org/debian testing/main amd64 libexpat1 amd64 2.7.3-1 [112 kB] Get:2 http://deb.debian.org/debian testing/main amd64 libpython3.13-minimal amd64 3.13.9-1 [865 kB] Get:3 http://deb.debian.org/debian testing/main amd64 python3.13-minimal amd64 3.13.9-1 [2257 kB] Get:4 http://deb.debian.org/debian testing/main amd64 python3-minimal amd64 3.13.7-1 [27.2 kB] Get:5 http://deb.debian.org/debian testing/main amd64 media-types all 14.0.0 [30.8 kB] Get:6 http://deb.debian.org/debian testing/main amd64 netbase all 6.5 [12.4 kB] Get:7 http://deb.debian.org/debian testing/main amd64 libffi8 amd64 3.5.2-2 [25.5 kB] Get:8 http://deb.debian.org/debian testing/main amd64 libncursesw6 amd64 6.5+20250216-2 [135 kB] Get:9 http://deb.debian.org/debian testing/main amd64 readline-common all 8.3-3 [74.8 kB] Get:10 http://deb.debian.org/debian testing/main amd64 libreadline8t64 amd64 8.3-3 [191 kB] Get:11 http://deb.debian.org/debian testing/main amd64 libsqlite3-0 amd64 3.46.1-8 [968 kB] Get:12 http://deb.debian.org/debian testing/main amd64 libpython3.13-stdlib amd64 3.13.9-1 [1965 kB] Get:13 http://deb.debian.org/debian testing/main amd64 python3.13 amd64 3.13.9-1 [764 kB] Get:14 http://deb.debian.org/debian testing/main amd64 libpython3-stdlib amd64 3.13.7-1 [10.2 kB] Get:15 http://deb.debian.org/debian testing/main amd64 python3 amd64 3.13.7-1 [28.3 kB] Get:16 http://deb.debian.org/debian testing/main amd64 libkmod2 amd64 34.2-2 [63.2 kB] Get:17 http://deb.debian.org/debian testing/main amd64 kmod amd64 34.2-2 [95.7 kB] Get:18 http://deb.debian.org/debian testing/main amd64 openssl amd64 3.5.4-1 [1496 kB] Get:19 http://deb.debian.org/debian testing/main amd64 ca-certificates all 20250419 [162 kB] Get:20 http://deb.debian.org/debian testing/main amd64 pci.ids all 0.0~2025.11.04-1 [273 kB] Get:21 http://deb.debian.org/debian testing/main amd64 libpci3 amd64 1:3.14.0-1 [75.8 kB] Get:22 http://deb.debian.org/debian testing/main amd64 pciutils amd64 1:3.14.0-1 [133 kB] Get:23 http://deb.debian.org/debian testing/main amd64 libdrm-common all 2.4.127-1 [9060 B] Get:24 http://deb.debian.org/debian testing/main amd64 libdrm2 amd64 2.4.127-1 [39.8 kB] Get:25 http://deb.debian.org/debian testing/main amd64 libdrm-amdgpu1 amd64 2.4.127-1 [23.8 kB] Get:26 http://deb.debian.org/debian testing/main amd64 libelf1t64 amd64 0.194-1 [185 kB] Get:27 http://deb.debian.org/debian testing/main amd64 libgpm2 amd64 1.20.7-12 [15.0 kB] Get:28 http://deb.debian.org/debian testing/main amd64 libnuma1 amd64 2.0.19-1 [22.2 kB] Get:29 http://deb.debian.org/debian testing/main amd64 libhsakmt1 amd64 6.2.4+ds-1 [61.1 kB] Get:30 http://deb.debian.org/debian testing/main amd64 libhsa-runtime64-1 amd64 6.1.2-3 [535 kB] Get:31 http://deb.debian.org/debian testing/main amd64 rocminfo amd64 6.4.3-1 [25.8 kB] Fetched 10.7 MB in 0s (64.1 MB/s) debconf: unable to initialize frontend: Dialog debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 79, <STDIN> line 31.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC entries checked: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.40.1 /usr/local/share/perl/5.40.1 /usr/lib/x86_64-linux-gnu/perl5/5.40 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl-base /usr/lib/x86_64-linux-gnu/perl/5.40 /usr/share/perl/5.40 /usr/local/lib/site_perl) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 8, <STDIN> line 31.) debconf: falling back to frontend: Teletype Extracting templates from packages: 100% Preconfiguring packages ... Selecting previously unselected package libexpat1:amd64. (Reading database ... 4881 files and directories currently installed.) Preparing to unpack .../libexpat1_2.7.3-1_amd64.deb ... Unpacking libexpat1:amd64 (2.7.3-1) ... Selecting previously unselected package libpython3.13-minimal:amd64. Preparing to unpack .../libpython3.13-minimal_3.13.9-1_amd64.deb ... Unpacking libpython3.13-minimal:amd64 (3.13.9-1) ... Selecting previously unselected package python3.13-minimal. Preparing to unpack .../python3.13-minimal_3.13.9-1_amd64.deb ... Unpacking python3.13-minimal (3.13.9-1) ... Setting up libpython3.13-minimal:amd64 (3.13.9-1) ... Setting up libexpat1:amd64 (2.7.3-1) ... Setting up python3.13-minimal (3.13.9-1) ... Selecting previously unselected package python3-minimal. (Reading database ... 5215 files and directories currently installed.) Preparing to unpack .../00-python3-minimal_3.13.7-1_amd64.deb ... Unpacking python3-minimal (3.13.7-1) ... Selecting previously unselected package media-types. Preparing to unpack .../01-media-types_14.0.0_all.deb ... Unpacking media-types (14.0.0) ... Selecting previously unselected package netbase. Preparing to unpack .../02-netbase_6.5_all.deb ... Unpacking netbase (6.5) ... Selecting previously unselected package libffi8:amd64. Preparing to unpack .../03-libffi8_3.5.2-2_amd64.deb ... Unpacking libffi8:amd64 (3.5.2-2) ... Selecting previously unselected package libncursesw6:amd64. Preparing to unpack .../04-libncursesw6_6.5+20250216-2_amd64.deb ... Unpacking libncursesw6:amd64 (6.5+20250216-2) ... Selecting previously unselected package readline-common. Preparing to unpack .../05-readline-common_8.3-3_all.deb ... Unpacking readline-common (8.3-3) ... Selecting previously unselected package libreadline8t64:amd64. Preparing to unpack .../06-libreadline8t64_8.3-3_amd64.deb ... Adding 'diversion of /lib/x86_64-linux-gnu/libhistory.so.8 to /lib/x86_64-linux-gnu/libhistory.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/x86_64-linux-gnu/libhistory.so.8.2 to /lib/x86_64-linux-gnu/libhistory.so.8.2.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/x86_64-linux-gnu/libreadline.so.8 to /lib/x86_64-linux-gnu/libreadline.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/x86_64-linux-gnu/libreadline.so.8.2 to /lib/x86_64-linux-gnu/libreadline.so.8.2.usr-is-merged by libreadline8t64' Unpacking libreadline8t64:amd64 (8.3-3) ... Selecting previously unselected package libsqlite3-0:amd64. Preparing to unpack .../07-libsqlite3-0_3.46.1-8_amd64.deb ... Unpacking libsqlite3-0:amd64 (3.46.1-8) ... Selecting previously unselected package libpython3.13-stdlib:amd64. Preparing to unpack .../08-libpython3.13-stdlib_3.13.9-1_amd64.deb ... Unpacking libpython3.13-stdlib:amd64 (3.13.9-1) ... Selecting previously unselected package python3.13. Preparing to unpack .../09-python3.13_3.13.9-1_amd64.deb ... Unpacking python3.13 (3.13.9-1) ... Selecting previously unselected package libpython3-stdlib:amd64. Preparing to unpack .../10-libpython3-stdlib_3.13.7-1_amd64.deb ... Unpacking libpython3-stdlib:amd64 (3.13.7-1) ... Setting up python3-minimal (3.13.7-1) ... Selecting previously unselected package python3. (Reading database ... 5731 files and directories currently installed.) Preparing to unpack .../00-python3_3.13.7-1_amd64.deb ... Unpacking python3 (3.13.7-1) ... Selecting previously unselected package libkmod2:amd64. Preparing to unpack .../01-libkmod2_34.2-2_amd64.deb ... Unpacking libkmod2:amd64 (34.2-2) ... Selecting previously unselected package kmod. Preparing to unpack .../02-kmod_34.2-2_amd64.deb ... Unpacking kmod (34.2-2) ... Selecting previously unselected package openssl. Preparing to unpack .../03-openssl_3.5.4-1_amd64.deb ... Unpacking openssl (3.5.4-1) ... Selecting previously unselected package ca-certificates. Preparing to unpack .../04-ca-certificates_20250419_all.deb ... Unpacking ca-certificates (20250419) ... Selecting previously unselected package pci.ids. Preparing to unpack .../05-pci.ids_0.0~2025.11.04-1_all.deb ... Unpacking pci.ids (0.0~2025.11.04-1) ... Selecting previously unselected package libpci3:amd64. Preparing to unpack .../06-libpci3_1%3a3.14.0-1_amd64.deb ... Unpacking libpci3:amd64 (1:3.14.0-1) ... Selecting previously unselected package pciutils. Preparing to unpack .../07-pciutils_1%3a3.14.0-1_amd64.deb ... Unpacking pciutils (1:3.14.0-1) ... Selecting previously unselected package libdrm-common. Preparing to unpack .../08-libdrm-common_2.4.127-1_all.deb ... Unpacking libdrm-common (2.4.127-1) ... Selecting previously unselected package libdrm2:amd64. Preparing to unpack .../09-libdrm2_2.4.127-1_amd64.deb ... Unpacking libdrm2:amd64 (2.4.127-1) ... Selecting previously unselected package libdrm-amdgpu1:amd64. Preparing to unpack .../10-libdrm-amdgpu1_2.4.127-1_amd64.deb ... Unpacking libdrm-amdgpu1:amd64 (2.4.127-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../11-libelf1t64_0.194-1_amd64.deb ... Unpacking libelf1t64:amd64 (0.194-1) ... Selecting previously unselected package libgpm2:amd64. Preparing to unpack .../12-libgpm2_1.20.7-12_amd64.deb ... Unpacking libgpm2:amd64 (1.20.7-12) ... Selecting previously unselected package libnuma1:amd64. Preparing to unpack .../13-libnuma1_2.0.19-1_amd64.deb ... Unpacking libnuma1:amd64 (2.0.19-1) ... Selecting previously unselected package libhsakmt1:amd64. Preparing to unpack .../14-libhsakmt1_6.2.4+ds-1_amd64.deb ... Unpacking libhsakmt1:amd64 (6.2.4+ds-1) ... Selecting previously unselected package libhsa-runtime64-1:amd64. Preparing to unpack .../15-libhsa-runtime64-1_6.1.2-3_amd64.deb ... Unpacking libhsa-runtime64-1:amd64 (6.1.2-3) ... Selecting previously unselected package rocminfo. Preparing to unpack .../16-rocminfo_6.4.3-1_amd64.deb ... Unpacking rocminfo (6.4.3-1) ... Setting up media-types (14.0.0) ... Setting up pci.ids (0.0~2025.11.04-1) ... Setting up libgpm2:amd64 (1.20.7-12) ... Setting up libsqlite3-0:amd64 (3.46.1-8) ... Setting up libelf1t64:amd64 (0.194-1) ... Setting up libncursesw6:amd64 (6.5+20250216-2) ... Setting up libpci3:amd64 (1:3.14.0-1) ... Setting up libffi8:amd64 (3.5.2-2) ... Setting up libnuma1:amd64 (2.0.19-1) ... Setting up netbase (6.5) ... Setting up openssl (3.5.4-1) ... Setting up libdrm-common (2.4.127-1) ... Setting up readline-common (8.3-3) ... Setting up libkmod2:amd64 (34.2-2) ... Setting up kmod (34.2-2) ... Setting up ca-certificates (20250419) ... debconf: unable to initialize frontend: Dialog debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 79.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC entries checked: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.40.1 /usr/local/share/perl/5.40.1 /usr/ lib/x86_64-linux-gnu/perl5/5.40 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl-base /usr/lib/x86_64-linux-gnu/perl/5.40 /usr/share/perl/5.40 /usr/local/lib/site_perl) at /usr/share/perl5/Debconf/FrontEnd/Readli ne.pm line 8.) debconf: falling back to frontend: Teletype Updating certificates in /etc/ssl/certs... 150 added, 0 removed; done. Setting up pciutils (1:3.14.0-1) ... Setting up libreadline8t64:amd64 (8.3-3) ... Setting up libdrm2:amd64 (2.4.127-1) ... Setting up libpython3.13-stdlib:amd64 (3.13.9-1) ... Setting up libpython3-stdlib:amd64 (3.13.7-1) ... Setting up libdrm-amdgpu1:amd64 (2.4.127-1) ... Setting up python3.13 (3.13.9-1) ... Setting up python3 (3.13.7-1) ... running python rtupdate hooks for python3.13... running python post-rtupdate hooks for python3.13... Setting up libhsakmt1:amd64 (6.2.4+ds-1) ... Setting up libhsa-runtime64-1:amd64 (6.1.2-3) ... Setting up rocminfo (6.4.3-1) ... Processing triggers for libc-bin (2.41-12) ... Processing triggers for ca-certificates (20250419) ... Updating certificates in /etc/ssl/certs... 0 added, 0 removed; done. Running hooks in /etc/ca-certificates/update.d... done. root@94627f0cc2a9:~# apt upgrade Upgrading: libdebconfclient0 libsystemd0 libudev1 sysvinit-utils Summary: Upgrading: 4, Installing: 0, Removing: 0, Not Upgrading: 0 Download size: 672 kB Space needed: 0 B / 763 GB available Continue? [Y/n] y Get:1 http://deb.debian.org/debian testing/main amd64 sysvinit-utils amd64 3.15-6 [35.0 kB] Get:2 http://deb.debian.org/debian testing/main amd64 libdebconfclient0 amd64 0.282 [10.9 kB] Get:3 http://deb.debian.org/debian testing/main amd64 libsystemd0 amd64 259~rc1-1 [469 kB] Get:4 http://deb.debian.org/debian testing/main amd64 libudev1 amd64 259~rc1-1 [157 kB] Fetched 672 kB in 0s (22.4 MB/s) debconf: unable to initialize frontend: Dialog debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 79, <STDIN> line 4.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC entries checked: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.40.1 /usr/local/share/perl/5.40.1 /usr/lib/x86_64-linux-gnu/perl5/5.40 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl-base /usr/lib/x86_64-linux-gnu/perl/5.40 /usr/share/perl/5.40 /usr/local/lib/site_perl) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 8, <STDIN> line 4.) debconf: falling back to frontend: Teletype (Reading database ... 6445 files and directories currently installed.) Preparing to unpack .../sysvinit-utils_3.15-6_amd64.deb ... Unpacking sysvinit-utils (3.15-6) over (3.15-5) ... Setting up sysvinit-utils (3.15-6) ... (Reading database ... 6445 files and directories currently installed.) Preparing to unpack .../libdebconfclient0_0.282_amd64.deb ... Unpacking libdebconfclient0:amd64 (0.282) over (0.281) ... Setting up libdebconfclient0:amd64 (0.282) ... (Reading database ... 6445 files and directories currently installed.) Preparing to unpack .../libsystemd0_259~rc1-1_amd64.deb ... Unpacking libsystemd0:amd64 (259~rc1-1) over (258.1-2) ... Setting up libsystemd0:amd64 (259~rc1-1) ... (Reading database ... 6445 files and directories currently installed.) Preparing to unpack .../libudev1_259~rc1-1_amd64.deb ... Unpacking libudev1:amd64 (259~rc1-1) over (258.1-2) ... Setting up libudev1:amd64 (259~rc1-1) ... Processing triggers for libc-bin (2.41-12) ... root@94627f0cc2a9:~# rocminfo ROCk module is loaded Unable to open /dev/kfd read-write: Permission denied root is not member of "bin" group, the default DRM access group. Users must be a member of the "bin" group or another DRM access group in order for ROCm applications to run successfully. root@94627f0cc2a9:~# exit exit cgmb@scorbunny:~/builds/rocm-hipamd$ docker run -it --device=/dev/dri --device=/dev/kfd --security-opt seccomp=unconfined --group-add=video --group-add=$(getent group render | cut -d: -f3) --group-add=bin --volume $HOME:/mnt/home debian:testing root@ffa7b1c5dae7:/# cd ~ root@ffa7b1c5dae7:~# apt -y update && apt -y upgrade && apt -y install rocminfo Get:1 http://deb.debian.org/debian testing InRelease [148 kB] Get:2 http://deb.debian.org/debian testing-updates InRelease [45.1 kB] Get:3 http://deb.debian.org/debian-security testing-security InRelease [43.4 kB] Get:4 http://deb.debian.org/debian testing/main amd64 Packages [9683 kB] Fetched 9920 kB in 1s (10.3 MB/s) 4 packages can be upgraded. Run 'apt list --upgradable' to see them. Upgrading: libdebconfclient0 libsystemd0 libudev1 sysvinit-utils Summary: Upgrading: 4, Installing: 0, Removing: 0, Not Upgrading: 0 Download size: 672 kB Space needed: 0 B / 763 GB available Get:1 http://deb.debian.org/debian testing/main amd64 sysvinit-utils amd64 3.15-6 [35.0 kB] Get:2 http://deb.debian.org/debian testing/main amd64 libdebconfclient0 amd64 0.282 [10.9 kB] Get:3 http://deb.debian.org/debian testing/main amd64 libsystemd0 amd64 259~rc1-1 [469 kB] Get:4 http://deb.debian.org/debian testing/main amd64 libudev1 amd64 259~rc1-1 [157 kB] Fetched 672 kB in 0s (18.7 MB/s) debconf: unable to initialize frontend: Dialog debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 79, <STDIN> line 4.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC entries checked: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.40.1 /usr/local/share/perl/5.40.1 /usr/lib/x86_64-linux-gnu/perl5/5.40 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl-base /usr/lib/x86_64-linux-gnu/perl/5.40 /usr/share/perl/5.40 /usr/local/lib/site_perl) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 8, <STDIN> line 4.) debconf: falling back to frontend: Teletype (Reading database ... 4881 files and directories currently installed.) Preparing to unpack .../sysvinit-utils_3.15-6_amd64.deb ... Unpacking sysvinit-utils (3.15-6) over (3.15-5) ... Setting up sysvinit-utils (3.15-6) ... (Reading database ... 4881 files and directories currently installed.) Preparing to unpack .../libdebconfclient0_0.282_amd64.deb ... Unpacking libdebconfclient0:amd64 (0.282) over (0.281) ... Setting up libdebconfclient0:amd64 (0.282) ... (Reading database ... 4881 files and directories currently installed.) Preparing to unpack .../libsystemd0_259~rc1-1_amd64.deb ... Unpacking libsystemd0:amd64 (259~rc1-1) over (258.1-2) ... Setting up libsystemd0:amd64 (259~rc1-1) ... (Reading database ... 4881 files and directories currently installed.) Preparing to unpack .../libudev1_259~rc1-1_amd64.deb ... Unpacking libudev1:amd64 (259~rc1-1) over (258.1-2) ... Setting up libudev1:amd64 (259~rc1-1) ... Processing triggers for libc-bin (2.41-12) ... Installing: rocminfo Installing dependencies: ca-certificates libdrm-common libexpat1 libhsa-runtime64-1 libncursesw6 libpython3-stdlib libreadline8t64 netbase pciutils python3.13 kmod libdrm2 libffi8 libhsakmt1 libnuma1 libpython3.13-minimal libsqlite3-0 openssl python3 python3.13-minimal libdrm-amdgpu1 libelf1t64 libgpm2 libkmod2 libpci3 libpython3.13-stdlib media-types pci.ids python3-minimal readline-common Suggested packages: gpm bzip2 wget | curl | lynx python3-doc python3-tk python3-venv python3.13-venv python3.13-doc binutils binfmt-support readline-doc Summary: Upgrading: 0, Installing: 31, Removing: 0, Not Upgrading: 0 Download size: 10.7 MB Space needed: 36.9 MB / 763 GB available Get:1 http://deb.debian.org/debian testing/main amd64 libexpat1 amd64 2.7.3-1 [112 kB] Get:2 http://deb.debian.org/debian testing/main amd64 libpython3.13-minimal amd64 3.13.9-1 [865 kB] Get:3 http://deb.debian.org/debian testing/main amd64 python3.13-minimal amd64 3.13.9-1 [2257 kB] Get:4 http://deb.debian.org/debian testing/main amd64 python3-minimal amd64 3.13.7-1 [27.2 kB] Get:5 http://deb.debian.org/debian testing/main amd64 media-types all 14.0.0 [30.8 kB] Get:6 http://deb.debian.org/debian testing/main amd64 netbase all 6.5 [12.4 kB] Get:7 http://deb.debian.org/debian testing/main amd64 libffi8 amd64 3.5.2-2 [25.5 kB] Get:8 http://deb.debian.org/debian testing/main amd64 libncursesw6 amd64 6.5+20250216-2 [135 kB] Get:9 http://deb.debian.org/debian testing/main amd64 readline-common all 8.3-3 [74.8 kB] Get:10 http://deb.debian.org/debian testing/main amd64 libreadline8t64 amd64 8.3-3 [191 kB] Get:11 http://deb.debian.org/debian testing/main amd64 libsqlite3-0 amd64 3.46.1-8 [968 kB] Get:12 http://deb.debian.org/debian testing/main amd64 libpython3.13-stdlib amd64 3.13.9-1 [1965 kB] Get:13 http://deb.debian.org/debian testing/main amd64 python3.13 amd64 3.13.9-1 [764 kB] Get:14 http://deb.debian.org/debian testing/main amd64 libpython3-stdlib amd64 3.13.7-1 [10.2 kB] Get:15 http://deb.debian.org/debian testing/main amd64 python3 amd64 3.13.7-1 [28.3 kB] Get:16 http://deb.debian.org/debian testing/main amd64 libkmod2 amd64 34.2-2 [63.2 kB] Get:17 http://deb.debian.org/debian testing/main amd64 kmod amd64 34.2-2 [95.7 kB] Get:18 http://deb.debian.org/debian testing/main amd64 openssl amd64 3.5.4-1 [1496 kB] Get:19 http://deb.debian.org/debian testing/main amd64 ca-certificates all 20250419 [162 kB] Get:20 http://deb.debian.org/debian testing/main amd64 pci.ids all 0.0~2025.11.04-1 [273 kB] Get:21 http://deb.debian.org/debian testing/main amd64 libpci3 amd64 1:3.14.0-1 [75.8 kB] Get:22 http://deb.debian.org/debian testing/main amd64 pciutils amd64 1:3.14.0-1 [133 kB] Get:23 http://deb.debian.org/debian testing/main amd64 libdrm-common all 2.4.127-1 [9060 B] Get:24 http://deb.debian.org/debian testing/main amd64 libdrm2 amd64 2.4.127-1 [39.8 kB] Get:25 http://deb.debian.org/debian testing/main amd64 libdrm-amdgpu1 amd64 2.4.127-1 [23.8 kB] Get:26 http://deb.debian.org/debian testing/main amd64 libelf1t64 amd64 0.194-1 [185 kB] Get:27 http://deb.debian.org/debian testing/main amd64 libgpm2 amd64 1.20.7-12 [15.0 kB] Get:28 http://deb.debian.org/debian testing/main amd64 libnuma1 amd64 2.0.19-1 [22.2 kB] Get:29 http://deb.debian.org/debian testing/main amd64 libhsakmt1 amd64 6.2.4+ds-1 [61.1 kB] Get:30 http://deb.debian.org/debian testing/main amd64 libhsa-runtime64-1 amd64 6.1.2-3 [535 kB] Get:31 http://deb.debian.org/debian testing/main amd64 rocminfo amd64 6.4.3-1 [25.8 kB] Fetched 10.7 MB in 0s (66.1 MB/s) debconf: unable to initialize frontend: Dialog debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 79, <STDIN> line 31.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC entries checked: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.40.1 /usr/local/share/perl/5.40.1 /usr/lib/x86_64-linux-gnu/perl5/5.40 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl-base /usr/lib/x86_64-linux-gnu/perl/5.40 /usr/share/perl/5.40 /usr/local/lib/site_perl) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 8, <STDIN> line 31.) debconf: falling back to frontend: Teletype Extracting templates from packages: 100% Preconfiguring packages ... Selecting previously unselected package libexpat1:amd64. (Reading database ... 4881 files and directories currently installed.) Preparing to unpack .../libexpat1_2.7.3-1_amd64.deb ... Unpacking libexpat1:amd64 (2.7.3-1) ... Selecting previously unselected package libpython3.13-minimal:amd64. Preparing to unpack .../libpython3.13-minimal_3.13.9-1_amd64.deb ... Unpacking libpython3.13-minimal:amd64 (3.13.9-1) ... Selecting previously unselected package python3.13-minimal. Preparing to unpack .../python3.13-minimal_3.13.9-1_amd64.deb ... Unpacking python3.13-minimal (3.13.9-1) ... Setting up libpython3.13-minimal:amd64 (3.13.9-1) ... Setting up libexpat1:amd64 (2.7.3-1) ... Setting up python3.13-minimal (3.13.9-1) ... Selecting previously unselected package python3-minimal. (Reading database ... 5215 files and directories currently installed.) Preparing to unpack .../00-python3-minimal_3.13.7-1_amd64.deb ... Unpacking python3-minimal (3.13.7-1) ... Selecting previously unselected package media-types. Preparing to unpack .../01-media-types_14.0.0_all.deb ... Unpacking media-types (14.0.0) ... Selecting previously unselected package netbase. Preparing to unpack .../02-netbase_6.5_all.deb ... Unpacking netbase (6.5) ... Selecting previously unselected package libffi8:amd64. Preparing to unpack .../03-libffi8_3.5.2-2_amd64.deb ... Unpacking libffi8:amd64 (3.5.2-2) ... Selecting previously unselected package libncursesw6:amd64. Preparing to unpack .../04-libncursesw6_6.5+20250216-2_amd64.deb ... Unpacking libncursesw6:amd64 (6.5+20250216-2) ... Selecting previously unselected package readline-common. Preparing to unpack .../05-readline-common_8.3-3_all.deb ... Unpacking readline-common (8.3-3) ... Selecting previously unselected package libreadline8t64:amd64. Preparing to unpack .../06-libreadline8t64_8.3-3_amd64.deb ... Adding 'diversion of /lib/x86_64-linux-gnu/libhistory.so.8 to /lib/x86_64-linux-gnu/libhistory.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/x86_64-linux-gnu/libhistory.so.8.2 to /lib/x86_64-linux-gnu/libhistory.so.8.2.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/x86_64-linux-gnu/libreadline.so.8 to /lib/x86_64-linux-gnu/libreadline.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/x86_64-linux-gnu/libreadline.so.8.2 to /lib/x86_64-linux-gnu/libreadline.so.8.2.usr-is-merged by libreadline8t64' Unpacking libreadline8t64:amd64 (8.3-3) ... Selecting previously unselected package libsqlite3-0:amd64. Preparing to unpack .../07-libsqlite3-0_3.46.1-8_amd64.deb ... Unpacking libsqlite3-0:amd64 (3.46.1-8) ... Selecting previously unselected package libpython3.13-stdlib:amd64. Preparing to unpack .../08-libpython3.13-stdlib_3.13.9-1_amd64.deb ... Unpacking libpython3.13-stdlib:amd64 (3.13.9-1) ... Selecting previously unselected package python3.13. Preparing to unpack .../09-python3.13_3.13.9-1_amd64.deb ... Unpacking python3.13 (3.13.9-1) ... Selecting previously unselected package libpython3-stdlib:amd64. Preparing to unpack .../10-libpython3-stdlib_3.13.7-1_amd64.deb ... Unpacking libpython3-stdlib:amd64 (3.13.7-1) ... Setting up python3-minimal (3.13.7-1) ... Selecting previously unselected package python3. (Reading database ... 5731 files and directories currently installed.) Preparing to unpack .../00-python3_3.13.7-1_amd64.deb ... Unpacking python3 (3.13.7-1) ... Selecting previously unselected package libkmod2:amd64. Preparing to unpack .../01-libkmod2_34.2-2_amd64.deb ... Unpacking libkmod2:amd64 (34.2-2) ... Selecting previously unselected package kmod. Preparing to unpack .../02-kmod_34.2-2_amd64.deb ... Unpacking kmod (34.2-2) ... Selecting previously unselected package openssl. Preparing to unpack .../03-openssl_3.5.4-1_amd64.deb ... Unpacking openssl (3.5.4-1) ... Selecting previously unselected package ca-certificates. Preparing to unpack .../04-ca-certificates_20250419_all.deb ... Unpacking ca-certificates (20250419) ... Selecting previously unselected package pci.ids. Preparing to unpack .../05-pci.ids_0.0~2025.11.04-1_all.deb ... Unpacking pci.ids (0.0~2025.11.04-1) ... Selecting previously unselected package libpci3:amd64. Preparing to unpack .../06-libpci3_1%3a3.14.0-1_amd64.deb ... Unpacking libpci3:amd64 (1:3.14.0-1) ... Selecting previously unselected package pciutils. Preparing to unpack .../07-pciutils_1%3a3.14.0-1_amd64.deb ... Unpacking pciutils (1:3.14.0-1) ... Selecting previously unselected package libdrm-common. Preparing to unpack .../08-libdrm-common_2.4.127-1_all.deb ... Unpacking libdrm-common (2.4.127-1) ... Selecting previously unselected package libdrm2:amd64. Preparing to unpack .../09-libdrm2_2.4.127-1_amd64.deb ... Unpacking libdrm2:amd64 (2.4.127-1) ... Selecting previously unselected package libdrm-amdgpu1:amd64. Preparing to unpack .../10-libdrm-amdgpu1_2.4.127-1_amd64.deb ... Unpacking libdrm-amdgpu1:amd64 (2.4.127-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../11-libelf1t64_0.194-1_amd64.deb ... Unpacking libelf1t64:amd64 (0.194-1) ... Selecting previously unselected package libgpm2:amd64. Preparing to unpack .../12-libgpm2_1.20.7-12_amd64.deb ... Unpacking libgpm2:amd64 (1.20.7-12) ... Selecting previously unselected package libnuma1:amd64. Preparing to unpack .../13-libnuma1_2.0.19-1_amd64.deb ... Unpacking libnuma1:amd64 (2.0.19-1) ... Selecting previously unselected package libhsakmt1:amd64. Preparing to unpack .../14-libhsakmt1_6.2.4+ds-1_amd64.deb ... Unpacking libhsakmt1:amd64 (6.2.4+ds-1) ... Selecting previously unselected package libhsa-runtime64-1:amd64. Preparing to unpack .../15-libhsa-runtime64-1_6.1.2-3_amd64.deb ... Unpacking libhsa-runtime64-1:amd64 (6.1.2-3) ... Selecting previously unselected package rocminfo. Preparing to unpack .../16-rocminfo_6.4.3-1_amd64.deb ... Unpacking rocminfo (6.4.3-1) ... Setting up media-types (14.0.0) ... Setting up pci.ids (0.0~2025.11.04-1) ... Setting up libgpm2:amd64 (1.20.7-12) ... Setting up libsqlite3-0:amd64 (3.46.1-8) ... Setting up libelf1t64:amd64 (0.194-1) ... Setting up libncursesw6:amd64 (6.5+20250216-2) ... Setting up libpci3:amd64 (1:3.14.0-1) ... Setting up libffi8:amd64 (3.5.2-2) ... Setting up libnuma1:amd64 (2.0.19-1) ... Setting up netbase (6.5) ... Setting up openssl (3.5.4-1) ... Setting up libdrm-common (2.4.127-1) ... Setting up readline-common (8.3-3) ... Setting up libkmod2:amd64 (34.2-2) ... Setting up kmod (34.2-2) ... Setting up ca-certificates (20250419) ... debconf: unable to initialize frontend: Dialog debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 79.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC entries checked: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.40.1 /usr/local/share/perl/5.40.1 /usr/ lib/x86_64-linux-gnu/perl5/5.40 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl-base /usr/lib/x86_64-linux-gnu/perl/5.40 /usr/share/perl/5.40 /usr/local/lib/site_perl) at /usr/share/perl5/Debconf/FrontEnd/Readli ne.pm line 8.) debconf: falling back to frontend: Teletype Updating certificates in /etc/ssl/certs... 150 added, 0 removed; done. Setting up pciutils (1:3.14.0-1) ... Setting up libreadline8t64:amd64 (8.3-3) ... Setting up libdrm2:amd64 (2.4.127-1) ... Setting up libpython3.13-stdlib:amd64 (3.13.9-1) ... Setting up libpython3-stdlib:amd64 (3.13.7-1) ... Setting up libdrm-amdgpu1:amd64 (2.4.127-1) ... Setting up python3.13 (3.13.9-1) ... Setting up python3 (3.13.7-1) ... running python rtupdate hooks for python3.13... running python post-rtupdate hooks for python3.13... Setting up libhsakmt1:amd64 (6.2.4+ds-1) ... Setting up libhsa-runtime64-1:amd64 (6.1.2-3) ... Setting up rocminfo (6.4.3-1) ... Processing triggers for libc-bin (2.41-12) ... Processing triggers for ca-certificates (20250419) ... Updating certificates in /etc/ssl/certs... 0 added, 0 removed; done. Running hooks in /etc/ca-certificates/update.d... done. root@ffa7b1c5dae7:~# rocminfo ROCk module is loaded ===================== HSA System Attributes ===================== Runtime Version: 1.1 Runtime Ext Version: 1.4 System Timestamp Freq.: 1000.000000MHz Sig. Max Wait Duration: 18446744073709551615 (0xFFFFFFFFFFFFFFFF) (timestamp count) Machine Model: LARGE System Endianness: LITTLE Mwaitx: DISABLED XNACK enabled: NO DMAbuf Support: YES VMM Support: YES ========== HSA Agents ========== ******* Agent 1 ******* Name: AMD Ryzen 9 3950X 16-Core Processor Uuid: CPU-XX Marketing Name: AMD Ryzen 9 3950X 16-Core Processor Vendor Name: CPU Feature: None specified Profile: FULL_PROFILE Float Round Mode: NEAR Max Queue Number: 0(0x0) Queue Min Size: 0(0x0) Queue Max Size: 0(0x0) Queue Type: MULTI Node: 0 Device Type: CPU Cache Info: L1: 32768(0x8000) KB Chip ID: 0(0x0) ASIC Revision: 0(0x0) Cacheline Size: 64(0x40) Max Clock Freq. (MHz): 4763 BDFID: 0 Internal Node ID: 0 Compute Unit: 32 SIMDs per CU: 0 Shader Engines: 0 Shader Arrs. per Eng.: 0 WatchPts on Addr. Ranges:1 Memory Properties: Features: None Pool Info: Pool 1 Segment: GLOBAL; FLAGS: FINE GRAINED Size: 65765504(0x3eb8080) KB Allocatable: TRUE Alloc Granule: 4KB Alloc Recommended Granule:4KB Alloc Alignment: 4KB Accessible by all: TRUE Pool 2 Segment: GLOBAL; FLAGS: KERNARG, FINE GRAINED Size: 65765504(0x3eb8080) KB Allocatable: TRUE Alloc Granule: 4KB Alloc Recommended Granule:4KB Alloc Alignment: 4KB Accessible by all: TRUE Pool 3 Segment: GLOBAL; FLAGS: COARSE GRAINED Size: 65765504(0x3eb8080) KB Allocatable: TRUE Alloc Granule: 4KB Alloc Recommended Granule:4KB Alloc Alignment: 4KB Accessible by all: TRUE ISA Info: ******* Agent 2 ******* Name: gfx906 Uuid: GPU-128218c172fd5d3c Marketing Name: AMD Radeon VII Vendor Name: AMD Feature: KERNEL_DISPATCH Profile: BASE_PROFILE Float Round Mode: NEAR Max Queue Number: 128(0x80) Queue Min Size: 64(0x40) Queue Max Size: 131072(0x20000) Queue Type: MULTI Node: 1 Device Type: GPU Cache Info: L1: 16(0x10) KB L2: 8192(0x2000) KB Chip ID: 26287(0x66af) ASIC Revision: 1(0x1) Cacheline Size: 64(0x40) Max Clock Freq. (MHz): 1801 BDFID: 3072 Internal Node ID: 1 Compute Unit: 60 SIMDs per CU: 4 Shader Engines: 4 Shader Arrs. per Eng.: 1 WatchPts on Addr. Ranges:4 Coherent Host Access: FALSE Memory Properties: Features: KERNEL_DISPATCH Fast F16 Operation: TRUE Wavefront Size: 64(0x40) Workgroup Max Size: 1024(0x400) Workgroup Max Size per Dimension: x 1024(0x400) y 1024(0x400) z 1024(0x400) Max Waves Per CU: 40(0x28) Max Work-item Per CU: 2560(0xa00) Grid Max Size: 4294967295(0xffffffff) Grid Max Size per Dimension: x 4294967295(0xffffffff) y 4294967295(0xffffffff) z 4294967295(0xffffffff) Max fbarriers/Workgrp: 32 Packet Processor uCode:: 478 SDMA engine uCode:: 145 IOMMU Support:: None Pool Info: Pool 1 Segment: GLOBAL; FLAGS: COARSE GRAINED Size: 16760832(0xffc000) KB Allocatable: TRUE Alloc Granule: 4KB Alloc Recommended Granule:2048KB Alloc Alignment: 4KB Accessible by all: FALSE Pool 2 Segment: GLOBAL; FLAGS: EXTENDED FINE GRAINED Size: 16760832(0xffc000) KB Allocatable: TRUE Alloc Granule: 4KB Alloc Recommended Granule:2048KB Alloc Alignment: 4KB Accessible by all: FALSE Pool 3 Segment: GROUP Size: 64(0x40) KB Allocatable: FALSE Alloc Granule: 0KB Alloc Recommended Granule:0KB Alloc Alignment: 0KB Accessible by all: FALSE ISA Info: ISA 1 Name: amdgcn-amd-amdhsa--gfx906:sramecc+:xnack- Machine Models: HSA_MACHINE_MODEL_LARGE Profiles: HSA_PROFILE_BASE Default Rounding Mode: NEAR Default Rounding Mode: NEAR Fast f16: TRUE Workgroup Max Size: 1024(0x400) Workgroup Max Size per Dimension: x 1024(0x400) y 1024(0x400) z 1024(0x400) Grid Max Size: 4294967295(0xffffffff) Grid Max Size per Dimension: x 4294967295(0xffffffff) y 4294967295(0xffffffff) z 4294967295(0xffffffff) FBarrier Max Size: 32 *** Done *** root@ffa7b1c5dae7:~# apt install librocsparse0-tests Installing: librocsparse0-tests Installing dependencies: libamd-comgr2 libamdhip64-5 libedit2 libllvm17t64 librocsparse0 librocsparse0-tests-data libxml2-16 libz3-4 Summary: Upgrading: 0, Installing: 9, Removing: 0, Not Upgrading: 0 Download size: 406 MB Space needed: 1727 MB / 763 GB available Continue? [Y/n] y Get:1 http://deb.debian.org/debian testing/main amd64 libedit2 amd64 3.1-20250104-1 [93.8 kB] Get:2 http://deb.debian.org/debian testing/main amd64 libxml2-16 amd64 2.15.1+dfsg-1 [641 kB] Get:3 http://deb.debian.org/debian testing/main amd64 libz3-4 amd64 4.13.3-1 [8560 kB] Get:4 http://deb.debian.org/debian testing/main amd64 libllvm17t64 amd64 1:17.0.6-23 [23.6 MB] Get:5 http://deb.debian.org/debian testing/main amd64 libamd-comgr2 amd64 6.0+git20231212.4510c28+dfsg-3+b2 [13.0 MB] Get:6 http://deb.debian.org/debian testing/main amd64 libamdhip64-5 amd64 5.7.1-7 [8938 kB] Get:7 http://deb.debian.org/debian testing/main amd64 librocsparse0 amd64 5.7.1-6 [346 MB] Get:8 http://deb.debian.org/debian testing/main amd64 librocsparse0-tests-data all 5.7.1-6 [422 kB] Get:9 http://deb.debian.org/debian testing/main amd64 librocsparse0-tests amd64 5.7.1-6 [4652 kB] Fetched 406 MB in 26s (15.6 MB/s) debconf: unable to initialize frontend: Dialog debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 79, <STDIN> line 9.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC entries checked: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.40.1 /usr/local/share/perl/5.40.1 /usr/lib/x86_64-linux-gnu/perl5/5.40 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl-base /usr/lib/x86_64-linux-gnu/perl/5.40 /usr/share/perl/5.40 /usr/local/lib/site_perl) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 8, <STDIN> line 9.) debconf: falling back to frontend: Teletype Selecting previously unselected package libedit2:amd64. (Reading database ... 6445 files and directories currently installed.) Preparing to unpack .../0-libedit2_3.1-20250104-1_amd64.deb ... Unpacking libedit2:amd64 (3.1-20250104-1) ... Selecting previously unselected package libxml2-16:amd64. Preparing to unpack .../1-libxml2-16_2.15.1+dfsg-1_amd64.deb ... Unpacking libxml2-16:amd64 (2.15.1+dfsg-1) ... Selecting previously unselected package libz3-4:amd64. Preparing to unpack .../2-libz3-4_4.13.3-1_amd64.deb ... Unpacking libz3-4:amd64 (4.13.3-1) ... Selecting previously unselected package libllvm17t64:amd64. Preparing to unpack .../3-libllvm17t64_1%3a17.0.6-23_amd64.deb ... Unpacking libllvm17t64:amd64 (1:17.0.6-23) ... Selecting previously unselected package libamd-comgr2:amd64. Preparing to unpack .../4-libamd-comgr2_6.0+git20231212.4510c28+dfsg-3+b2_amd64.deb ... Unpacking libamd-comgr2:amd64 (6.0+git20231212.4510c28+dfsg-3+b2) ... Selecting previously unselected package libamdhip64-5:amd64. Preparing to unpack .../5-libamdhip64-5_5.7.1-7_amd64.deb ... Unpacking libamdhip64-5:amd64 (5.7.1-7) ... Selecting previously unselected package librocsparse0. Preparing to unpack .../6-librocsparse0_5.7.1-6_amd64.deb ... Unpacking librocsparse0 (5.7.1-6) ... Selecting previously unselected package librocsparse0-tests-data. Preparing to unpack .../7-librocsparse0-tests-data_5.7.1-6_all.deb ... Unpacking librocsparse0-tests-data (5.7.1-6) ... Selecting previously unselected package librocsparse0-tests. Preparing to unpack .../8-librocsparse0-tests_5.7.1-6_amd64.deb ... Unpacking librocsparse0-tests (5.7.1-6) ... Setting up libxml2-16:amd64 (2.15.1+dfsg-1) ... Setting up libedit2:amd64 (3.1-20250104-1) ... Setting up libz3-4:amd64 (4.13.3-1) ... Setting up libllvm17t64:amd64 (1:17.0.6-23) ... Setting up librocsparse0-tests-data (5.7.1-6) ... Setting up libamd-comgr2:amd64 (6.0+git20231212.4510c28+dfsg-3+b2) ... Setting up libamdhip64-5:amd64 (5.7.1-7) ... Setting up librocsparse0 (5.7.1-6) ... Setting up librocsparse0-tests (5.7.1-6) ... Processing triggers for libc-bin (2.41-12) ... root@ffa7b1c5dae7:~# /usr/libexec/rocm/librocsparse0-tests/rocsparse-test --gtest_filter='*quick*' Query device success: there are 1 devices Device ID 0: AMD Radeon VII ------------------------------------------------------------------------- with 16368MB memory, clock rate 1801MHz @ computing capability 9.0 maxGridDimX 2147483647, sharedMemPerBlock 64KB, maxThreadsPerBlock 1024 wavefrontSize 64 ------------------------------------------------------------------------- Using device ID 0 (AMD Radeon VII) for rocSPARSE ------------------------------------------------------------------------- rocSPARSE version: 2.5.4- <...> [----------] Global test environment tear-down [==========] 121031 tests from 111 test suites ran. (326686 ms total) [ PASSED ] 121031 tests. root@ffa7b1c5dae7:~# apt -qq list hipcc libamdhip64-5 libamdhip64-dev libhiprtc-builtins5 hipcc/testing 5.7.1-7 amd64 libamdhip64-5/testing,now 5.7.1-7 amd64 [installed,automatic] libamdhip64-dev/testing 5.7.1-7 amd64 libhiprtc-builtins5/testing 5.7.1-7 amd64 root@ffa7b1c5dae7:~# apt install /mnt/home/builds/rocm-hipamd/libamdhip64-5_5.7.1-7+deb14u1_amd64.deb Note, selecting 'libamdhip64-5' instead of '/mnt/home/builds/rocm-hipamd/libamdhip64-5_5.7.1-7+deb14u1_amd64.deb' Upgrading: libamdhip64-5 Summary: Upgrading: 1, Installing: 0, Removing: 0, Not Upgrading: 0 Download size: 0 B / 8943 kB Space needed: 1024 B / 761 GB available Get:1 /mnt/home/builds/rocm-hipamd/libamdhip64-5_5.7.1-7+deb14u1_amd64.deb libamdhip64-5 amd64 5.7.1-7+deb14u1 [8943 kB] debconf: unable to initialize frontend: Dialog debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 79, <STDIN> line 1.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC entries checked: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.40.1 /usr/local/share/perl/5.40.1 /usr/lib/x86_64-linux-gnu/perl5/5.40 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl-base /usr/lib/x86_64-linux-gnu/perl/5.40 /usr/share/perl/5.40 /usr/local/lib/site_perl) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 8, <STDIN> line 1.) debconf: falling back to frontend: Teletype (Reading database ... 6509 files and directories currently installed.) Preparing to unpack .../libamdhip64-5_5.7.1-7+deb14u1_amd64.deb ... Unpacking libamdhip64-5:amd64 (5.7.1-7+deb14u1) over (5.7.1-7) ... Setting up libamdhip64-5:amd64 (5.7.1-7+deb14u1) ... Processing triggers for libc-bin (2.41-12) ... root@ffa7b1c5dae7:~# /usr/libexec/rocm/librocsparse0-tests/rocsparse-test --gtest_filter='*quick*' Query device success: there are 1 devices Device ID 0: AMD Radeon VII ------------------------------------------------------------------------- with 16368MB memory, clock rate 1801MHz @ computing capability 9.0 maxGridDimX 2147483647, sharedMemPerBlock 64KB, maxThreadsPerBlock 1024 wavefrontSize 64 ------------------------------------------------------------------------- Using device ID 0 (AMD Radeon VII) for rocSPARSE ------------------------------------------------------------------------- rocSPARSE version: 2.5.4- <...> [----------] Global test environment tear-down [==========] 121031 tests from 111 test suites ran. (314968 ms total) [ PASSED ] 121031 tests. root@ffa7b1c5dae7:~# apt install /mnt/home/builds/rocr-runtime/libhsakmt1_6.4.3+dfsg-5_amd64.deb /mnt/home/builds/rocr-runtime/libhsa-runtime64-1_6.4.3+dfsg-5_amd64.deb Note, selecting 'libhsakmt1' instead of '/mnt/home/builds/rocr-runtime/libhsakmt1_6.4.3+dfsg-5_amd64.deb' Note, selecting 'libhsa-runtime64-1' instead of '/mnt/home/builds/rocr-runtime/libhsa-runtime64-1_6.4.3+dfsg-5_amd64.deb' Upgrading: libhsa-runtime64-1 libhsakmt1 Summary: Upgrading: 2, Installing: 0, Removing: 0, Not Upgrading: 0 Download size: 0 B / 695 kB Space needed: 1150 kB / 759 GB available Get:1 /mnt/home/builds/rocr-runtime/libhsakmt1_6.4.3+dfsg-5_amd64.deb libhsakmt1 amd64 6.4.3+dfsg-5 [66.2 kB] Get:2 /mnt/home/builds/rocr-runtime/libhsa-runtime64-1_6.4.3+dfsg-5_amd64.deb libhsa-runtime64-1 amd64 6.4.3+dfsg-5 [629 kB] debconf: unable to initialize frontend: Dialog debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 79, <STDIN> line 2.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC entries checked: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.40.1 /usr/local/share/perl/5.40.1 /usr/lib/x86_64-linux-gnu/perl5/5.40 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl-base /usr/lib/x86_64-linux-gnu/perl/5.40 /usr/share/perl/5.40 /usr/local/lib/site_perl) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 8, <STDIN> line 2.) debconf: falling back to frontend: Teletype (Reading database ... 6509 files and directories currently installed.) Preparing to unpack .../libhsakmt1_6.4.3+dfsg-5_amd64.deb ... Unpacking libhsakmt1:amd64 (6.4.3+dfsg-5) over (6.2.4+ds-1) ... Preparing to unpack .../libhsa-runtime64-1_6.4.3+dfsg-5_amd64.deb ... Unpacking libhsa-runtime64-1:amd64 (6.4.3+dfsg-5) over (6.1.2-3) ... Setting up libhsakmt1:amd64 (6.4.3+dfsg-5) ... Setting up libhsa-runtime64-1:amd64 (6.4.3+dfsg-5) ... Processing triggers for libc-bin (2.41-12) ... root@ffa7b1c5dae7:~# /usr/libexec/rocm/librocsparse0-tests/rocsparse-test --gtest_filter='*quick*' Query device success: there are 1 devices Device ID 0: AMD Radeon VII ------------------------------------------------------------------------- with 16368MB memory, clock rate 1801MHz @ computing capability 9.0 maxGridDimX 2147483647, sharedMemPerBlock 64KB, maxThreadsPerBlock 1024 wavefrontSize 64 ------------------------------------------------------------------------- Using device ID 0 (AMD Radeon VII) for rocSPARSE ------------------------------------------------------------------------- rocSPARSE version: 2.5.4- <...> [----------] Global test environment tear-down [==========] 121031 tests from 111 test suites ran. (322924 ms total) [ PASSED ] 121031 tests. root@ffa7b1c5dae7:~# apt install clpeak /mnt/home/builds/rocm-hipamd/rocm-opencl-icd_5.7.1-7+deb14u1_amd64.deb Note, selecting 'rocm-opencl-icd' instead of '/mnt/home/builds/rocm-hipamd/rocm-opencl-icd_5.7.1-7+deb14u1_amd64.deb' Installing: clpeak rocm-opencl-icd Installing dependencies: ocl-icd-libopencl1 Summary: Upgrading: 0, Installing: 3, Removing: 0, Not Upgrading: 0 Download size: 91.1 kB / 595 kB Space needed: 2298 kB / 759 GB available Continue? [Y/n] y Get:1 /mnt/home/builds/rocm-hipamd/rocm-opencl-icd_5.7.1-7+deb14u1_amd64.deb rocm-opencl-icd amd64 5.7.1-7+deb14u1 [504 kB] Get:2 http://deb.debian.org/debian testing/main amd64 ocl-icd-libopencl1 amd64 2.3.4-1 [43.0 kB] Get:3 http://deb.debian.org/debian testing/main amd64 clpeak amd64 1.1.5-1 [48.1 kB] Fetched 91.1 kB in 0s (512 kB/s) debconf: unable to initialize frontend: Dialog debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 79, <STDIN> line 3.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC entries checked: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.40.1 /usr/local/share/perl/5.40.1 /usr/lib/x86_64-linux-gnu/perl5/5.40 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl-base /usr/lib/x86_64-linux-gnu/perl/5.40 /usr/share/perl/5.40 /usr/local/lib/site_perl) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 8, <STDIN> line 3.) debconf: falling back to frontend: Teletype Selecting previously unselected package ocl-icd-libopencl1:amd64. (Reading database ... 6509 files and directories currently installed.) Preparing to unpack .../ocl-icd-libopencl1_2.3.4-1_amd64.deb ... Unpacking ocl-icd-libopencl1:amd64 (2.3.4-1) ... Selecting previously unselected package clpeak. Preparing to unpack .../clpeak_1.1.5-1_amd64.deb ... Unpacking clpeak (1.1.5-1) ... Selecting previously unselected package rocm-opencl-icd:amd64. Preparing to unpack .../rocm-opencl-icd_5.7.1-7+deb14u1_amd64.deb ... Unpacking rocm-opencl-icd:amd64 (5.7.1-7+deb14u1) ... Setting up rocm-opencl-icd:amd64 (5.7.1-7+deb14u1) ... Setting up ocl-icd-libopencl1:amd64 (2.3.4-1) ... Setting up clpeak (1.1.5-1) ... Processing triggers for libc-bin (2.41-12) ... root@ffa7b1c5dae7:~# clpeak Platform: AMD Accelerated Parallel Processing Device: gfx906:sramecc+:xnack- Driver version : 3590.0 (HSA1.1,LC) (Linux x64) Compute units : 60 Clock frequency : 1801 MHz Global memory bandwidth (GBPS) float : 760.06 float2 : 808.23 float4 : 783.04 float8 : 783.68 float16 : 601.92 Single-precision compute (GFLOPS) float : 13618.39 float2 : 13635.25 float4 : 13444.23 float8 : 12748.75 float16 : 12641.30 Half-precision compute (GFLOPS) half : 6672.55 half2 : 24840.60 half4 : 24667.18 half8 : 25106.82 half16 : 26009.26 Double-precision compute (GFLOPS) double : 3418.92 double2 : 3421.25 double4 : 3412.99 double8 : 3391.41 double16 : 3304.08 Integer compute (GIOPS) int : 4408.88 int2 : 4358.42 int4 : 4367.60 int8 : 4340.72 int16 : 4343.11 Integer compute Fast 24bit (GIOPS) int : 12272.82 int2 : 11463.84 int4 : 11140.07 int8 : 11218.38 int16 : 10914.17 Integer char (8bit) compute (GIOPS) char : 13444.83 char2 : 7810.83 char4 : 7775.26 char8 : 6956.16 char16 : 6918.34 Integer short (16bit) compute (GIOPS) short : 13367.47 short2 : 13274.19 short4 : 13062.91 short8 : 12870.06 short16 : 12598.91 Transfer bandwidth (GBPS) enqueueWriteBuffer : 16.87 enqueueReadBuffer : 16.92 enqueueWriteBuffer non-blocking : 17.00 enqueueReadBuffer non-blocking : 16.91 enqueueMapBuffer(for read) : 1047553.00 memcpy from mapped ptr : 16.94 enqueueUnmap(after write) : 1130254.62 memcpy to mapped ptr : 16.99 Kernel launch latency : 5.70 us root@ffa7b1c5dae7:~# apt install --allow-downgrades /mnt/home/builds/rocr-runtime2/libhsakmt1_6.4.3+dfsg-2_amd64.deb /mnt/home/builds/rocr-runtime2/libhsa-runtime64-1_6.4.3+dfsg-2_amd64.deb Note, selecting 'libhsakmt1' instead of '/mnt/home/builds/rocr-runtime2/libhsakmt1_6.4.3+dfsg-2_amd64.deb' Note, selecting 'libhsa-runtime64-1' instead of '/mnt/home/builds/rocr-runtime2/libhsa-runtime64-1_6.4.3+dfsg-2_amd64.deb' DOWNGRADING: libhsa-runtime64-1 libhsakmt1 Summary: Upgrading: 0, Installing: 0, Downgrading: 2, Removing: 0, Not Upgrading: 0 Download size: 0 B / 694 kB Space needed: 0 B / 759 GB available Continue? [Y/n] y Get:1 /mnt/home/builds/rocr-runtime2/libhsakmt1_6.4.3+dfsg-2_amd64.deb libhsakmt1 amd64 6.4.3+dfsg-2 [66.1 kB] Get:2 /mnt/home/builds/rocr-runtime2/libhsa-runtime64-1_6.4.3+dfsg-2_amd64.deb libhsa-runtime64-1 amd64 6.4.3+dfsg-2 [628 kB] debconf: unable to initialize frontend: Dialog debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 79, <STDIN> line 2.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC entries checked: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.40.1 /usr/local/share/perl/5.40.1 /usr/lib/x86_64-linux-gnu/perl5/5.40 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl-base /usr/lib/x86_64-linux-gnu/perl/5.40 /usr/share/perl/5.40 /usr/local/lib/site_perl) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 8, <STDIN> line 2.) debconf: falling back to frontend: Teletype dpkg: warning: downgrading libhsakmt1:amd64 (6.4.3+dfsg-5) to (6.4.3+dfsg-2) (Reading database ... 6536 files and directories currently installed.) Preparing to unpack .../libhsakmt1_6.4.3+dfsg-2_amd64.deb ... Unpacking libhsakmt1:amd64 (6.4.3+dfsg-2) over (6.4.3+dfsg-5) ... dpkg: warning: downgrading libhsa-runtime64-1:amd64 (6.4.3+dfsg-5) to (6.4.3+dfsg-2) Preparing to unpack .../libhsa-runtime64-1_6.4.3+dfsg-2_amd64.deb ... Unpacking libhsa-runtime64-1:amd64 (6.4.3+dfsg-2) over (6.4.3+dfsg-5) ... Setting up libhsakmt1:amd64 (6.4.3+dfsg-2) ... Setting up libhsa-runtime64-1:amd64 (6.4.3+dfsg-2) ... Processing triggers for libc-bin (2.41-12) ... root@ffa7b1c5dae7:~# apt install --allow-downgrades /mnt/home/builds/rocr-runtime3/libhsakmt1_6.4.3+dfsg-1_amd64.deb /mnt/home/builds/rocr-runtime3/libhsa-runtime64-1_6.4.3+dfsg-1_amd64.deb libamdhip64-5/testing rocm-opencl-icd/testing Note, selecting 'libhsakmt1' instead of '/mnt/home/builds/rocr-runtime3/libhsakmt1_6.4.3+dfsg-1_amd64.deb' Note, selecting 'libhsa-runtime64-1' instead of '/mnt/home/builds/rocr-runtime3/libhsa-runtime64-1_6.4.3+dfsg-1_amd64.deb' libamdhip64-5 is already the newest version (5.7.1-7). libamdhip64-5 set to manually installed. rocm-opencl-icd is already the newest version (5.7.1-7). Selected version '5.7.1-7' (Debian:testing [amd64]) for 'libamdhip64-5' Selected version '5.7.1-7' (Debian:testing [amd64]) for 'rocm-opencl-icd' DOWNGRADING: libhsa-runtime64-1 libhsakmt1 Summary: Upgrading: 0, Installing: 0, Downgrading: 2, Removing: 0, Not Upgrading: 0 2 not fully installed or removed. Download size: 0 B / 694 kB Space needed: 0 B / 759 GB available Continue? [Y/n] y Get:1 /mnt/home/builds/rocr-runtime3/libhsakmt1_6.4.3+dfsg-1_amd64.deb libhsakmt1 amd64 6.4.3+dfsg-1 [65.7 kB] Get:2 /mnt/home/builds/rocr-runtime3/libhsa-runtime64-1_6.4.3+dfsg-1_amd64.deb libhsa-runtime64-1 amd64 6.4.3+dfsg-1 [628 kB] debconf: unable to initialize frontend: Dialog debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 79, <STDIN> line 2.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC entries checked: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.40.1 /usr/local/share/perl/5.40.1 /usr/lib/x86_64-linux-gnu/perl5/5.40 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl-base /usr/lib/x86_64-linux-gnu/perl/5.40 /usr/share/perl/5.40 /usr/local/lib/site_perl) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 8, <STDIN> line 2.) debconf: falling back to frontend: Teletype dpkg: warning: downgrading libhsakmt1:amd64 (6.4.3+dfsg-2) to (6.4.3+dfsg-1) (Reading database ... 6536 files and directories currently installed.) Preparing to unpack .../libhsakmt1_6.4.3+dfsg-1_amd64.deb ... Unpacking libhsakmt1:amd64 (6.4.3+dfsg-1) over (6.4.3+dfsg-2) ... dpkg: warning: downgrading libhsa-runtime64-1:amd64 (6.4.3+dfsg-2) to (6.4.3+dfsg-1) Preparing to unpack .../libhsa-runtime64-1_6.4.3+dfsg-1_amd64.deb ... Unpacking libhsa-runtime64-1:amd64 (6.4.3+dfsg-1) over (6.4.3+dfsg-2) ... Setting up libhsakmt1:amd64 (6.4.3+dfsg-1) ... Setting up libhsa-runtime64-1:amd64 (6.4.3+dfsg-1) ... Setting up rocm-opencl-icd:amd64 (5.7.1-7) ... Setting up libamdhip64-5:amd64 (5.7.1-7) ... Processing triggers for libc-bin (2.41-12) ... root@ffa7b1c5dae7:~# clpeak free(): invalid pointer Aborted clpeak root@ffa7b1c5dae7:~# /usr/libexec/rocm/librocsparse0-tests/rocsparse-test --gtest_filter='*quick*' free(): invalid pointer Aborted /usr/libexec/rocm/librocsparse0-tests/rocsparse-test --gtest_filter='*quick*' root@ffa7b1c5dae7:~# apt install /mnt/home/builds/rocm-hipamd/libamdhip64-5_5.7.1-7+deb14u1_amd64.deb /mnt/home/builds/rocm-hipamd/rocm-opencl-icd_5.7.1-7+deb14u1_amd64.deb Note, selecting 'libamdhip64-5' instead of '/mnt/home/builds/rocm-hipamd/libamdhip64-5_5.7.1-7+deb14u1_amd64.deb' Note, selecting 'rocm-opencl-icd' instead of '/mnt/home/builds/rocm-hipamd/rocm-opencl-icd_5.7.1-7+deb14u1_amd64.deb' Upgrading: libamdhip64-5 rocm-opencl-icd Summary: Upgrading: 2, Installing: 0, Removing: 0, Not Upgrading: 0 Download size: 0 B / 9447 kB Space needed: 2048 B / 759 GB available Get:1 /mnt/home/builds/rocm-hipamd/libamdhip64-5_5.7.1-7+deb14u1_amd64.deb libamdhip64-5 amd64 5.7.1-7+deb14u1 [8943 kB] Get:2 /mnt/home/builds/rocm-hipamd/rocm-opencl-icd_5.7.1-7+deb14u1_amd64.deb rocm-opencl-icd amd64 5.7.1-7+deb14u1 [504 kB] debconf: unable to initialize frontend: Dialog debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 79, <STDIN> line 2.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC entries checked: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.40.1 /usr/local/share/perl/5.40.1 /usr/lib/x86_64-linux-gnu/perl5/5.40 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl-base /usr/lib/x86_64-linux-gnu/perl/5.40 /usr/share/perl/5.40 /usr/local/lib/site_perl) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 8, <STDIN> line 2.) debconf: falling back to frontend: Teletype (Reading database ... 6536 files and directories currently installed.) Preparing to unpack .../libamdhip64-5_5.7.1-7+deb14u1_amd64.deb ... Unpacking libamdhip64-5:amd64 (5.7.1-7+deb14u1) over (5.7.1-7) ... Preparing to unpack .../rocm-opencl-icd_5.7.1-7+deb14u1_amd64.deb ... Unpacking rocm-opencl-icd:amd64 (5.7.1-7+deb14u1) over (5.7.1-7) ... Setting up rocm-opencl-icd:amd64 (5.7.1-7+deb14u1) ... Setting up libamdhip64-5:amd64 (5.7.1-7+deb14u1) ... Processing triggers for libc-bin (2.41-12) ... root@ffa7b1c5dae7:~# clpeak Platform: AMD Accelerated Parallel Processing Device: gfx906:sramecc+:xnack- Driver version : 3590.0 (HSA1.1,LC) (Linux x64) Compute units : 60 Clock frequency : 1801 MHz Global memory bandwidth (GBPS) float : 757.03 float2 : 808.50 float4 : 782.02 float8 : 783.15 float16 : 597.40 Single-precision compute (GFLOPS) float : 13661.42 float2 : 13637.56 float4 : 13569.96 float8 : 13218.40 float16 : 12589.14 Half-precision compute (GFLOPS) half : 6684.58 half2 : 24577.94 half4 : 25094.92 half8 : 26411.24 half16 : 26010.84 Double-precision compute (GFLOPS) double : 3418.91 double2 : 3423.31 double4 : 3413.03 double8 : 3324.83 double16 : 3206.18 Integer compute (GIOPS) int : 4374.11 int2 : 4372.14 int4 : 4380.13 int8 : 4325.87 int16 : 4368.52 Integer compute Fast 24bit (GIOPS) int : 12074.76 int2 : 11500.06 int4 : 11126.15 int8 : 11125.51 int16 : 11004.08 Integer char (8bit) compute (GIOPS) char : 12735.05 char2 : 7424.69 char4 : 7631.88 char8 : 7046.50 char16 : 6881.86 Integer short (16bit) compute (GIOPS) short : 12868.17 short2 : 12495.70 short4 : 12134.50 short8 : 12078.46 short16 : 12516.99 Transfer bandwidth (GBPS) enqueueWriteBuffer : 16.80 enqueueReadBuffer : 16.88 enqueueWriteBuffer non-blocking : 17.03 enqueueReadBuffer non-blocking : 16.67 enqueueMapBuffer(for read) : 913822.88 memcpy from mapped ptr : 16.60 enqueueUnmap(after write) : 1342177.25 memcpy to mapped ptr : 16.87 Kernel launch latency : 8.25 us root@ffa7b1c5dae7:~# /usr/libexec/rocm/librocsparse0-tests/rocsparse-test --gtest_filter='*quick*' Query device success: there are 1 devices Device ID 0: AMD Radeon VII ------------------------------------------------------------------------- with 16368MB memory, clock rate 1801MHz @ computing capability 9.0 maxGridDimX 2147483647, sharedMemPerBlock 64KB, maxThreadsPerBlock 1024 wavefrontSize 64 ------------------------------------------------------------------------- Using device ID 0 (AMD Radeon VII) for rocSPARSE ------------------------------------------------------------------------- rocSPARSE version: 2.5.4- <...> [----------] Global test environment tear-down [==========] 121031 tests from 111 test suites ran. (329184 ms total) [ PASSED ] 121031 tests.
