On 4/1/22 22:03, Stan Johnson wrote:
Hi Dennis,
Unless you already know that your system's memory is ok...
Sparc machines generally have ECC memory and the diagnostics are quite
well trusted.
However ... just for giggles ( yes the battery is crap ) :
root@hades:~#
root@hades:~# shutdown -h 'now'
root@hades:~# [ OK ] Removed slic Stopping Rescue Shell...
Stopping Load/Save Random Seed...
[ OK ] Stopped Rescue Shell.
[ OK ] Stopped target System Initialization.
[ OK ] Unset automount Arbitrary b&s File System Automount Point.
[ OK ] Stopped target Local Encrypted Volumes.
[ OK ] Stopped Dispatch Password b&ts to Console Directory Watch.
[ OK ] Stopped target Local Integrity Protected Volumes.
[ OK ] Stopped target Swaps.
[ OK ] Stopped target Local Verity Protected Volumes.
Deactivating swap /dev/disb&_3CD0ZHE200007120K5BC-part2...
Stopping Record System Boot/Shutdown in UTMP...
[ OK ] Deactivated swap /dev/diskb&00:01:02.0-scsi-0:0:0:0-part2.
[ OK ] Deactivated swap /dev/diskb&6G_3CD0ZHE200007120K5BC-part2.
[ OK ] Deactivated swap /dev/sda2.
[ OK ] Stopped ifup for eth0.
[ OK ] Stopped Load/Save Random Seed.
[ OK ] Deactivated swap /dev/diskb&2-e35a-4ff4-b7f5-f7d028c4ca2c.
[ OK ] Stopped Record System Boot/Shutdown in UTMP.
[ OK ] Stopped Apply Kernel Variables.
[ OK ] Stopped Load Kernel Modules.
[ OK ] Stopped Create Volatile Files and Directories.
[ OK ] Stopped target Local File Systems.
Unmounting /boot...
Unmounting /home...
Unmounting /run/credentials/systemd-sysusers.service...
Unmounting /usr/local...
[ OK ] Unmounted /boot.
[ OK ] Unmounted /home.
[ OK ] Unmounted /run/credentials/systemd-sysusers.service.
[ OK ] Unmounted /usr/local.
[ OK ] Reached target Unmount All Filesystems.
[ OK ] Stopped File System Check b&6-88fb-4134-88c5-485c34d4614c.
[ OK ] Stopped File System Check b&f-421e-477d-b5e3-830365a86b19.
[ OK ] Stopped File System Check b&9-00f1-497b-8b83-d726e914d044.
[ OK ] Removed slice Slice /system/systemd-fsck.
[ OK ] Stopped target Preparation for Local File Systems.
[ OK ] Stopped Create Static Device Nodes in /dev.
[ OK ] Stopped Create System Users.
[ OK ] Stopped Remount Root and Kernel File Systems.
[ OK ] Reached target System Shutdown.
[ OK ] Reached target Late Shutdown Services.
[ OK ] Finished System Power Off.
[ OK ] Reached target System Power Off.
[ 4732.049137] systemd-shutdown[1]: Syncing filesystems and block devices.
[ 4732.541119] systemd-shutdown[1]: Sending SIGTERM to remaining
processes...
[ 4732.650924] systemd-journald[183]: Received SIGTERM from PID 1
(systemd-shutdow).
[ 4732.886493] systemd-shutdown[1]: Sending SIGKILL to remaining
processes...
[ 4732.995664] systemd-shutdown[1]: Unmounting file systems.
[ 4733.075318] [308]: Remounting '/' read-only with options
'errors=remount-ro'.
[ 4733.223777] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro.
Quota mode: none.
[ 4733.335759] systemd-shutdown[1]: All filesystems unmounted.
[ 4733.409207] systemd-shutdown[1]: Deactivating swaps.
[ 4733.474932] systemd-shutdown[1]: All swaps deactivated.
[ 4733.543741] systemd-shutdown[1]: Detaching loop devices.
[ 4733.614459] systemd-shutdown[1]: All loop devices detached.
[ 4733.687858] systemd-shutdown[1]: Stopping MD devices.
[ 4733.755436] systemd-shutdown[1]: All MD devices stopped.
[ 4733.825318] systemd-shutdown[1]: Detaching DM devices.
[ 4733.893652] systemd-shutdown[1]: All DM devices detached.
[ 4733.964778] systemd-shutdown[1]: All filesystems, swaps, loop
devices, MD devices and DM devices detached.
[ 4734.136742] systemd-shutdown[1]: Syncing filesystems and block devices.
[ 4734.227936] systemd-shutdown[1]: Powering off.
[ 4734.286653] sd 0:0:1:0: [sdb] Synchronizing SCSI cache
[ 4734.354622] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 4734.423032] reboot: Power down
lom>
LOM event: power off
lom>
Get a coffee or whiskey or both and let the electrons settle...
lom>
LOM event: power on
ps/2 kbd check: 0000.0000.0000.00fe
Checking Sun KB Done
%o0 = 0000.0000.0055.4001
Executing Power On SelfTest
SPARCengine(tm)Ultra CP 1500 POST 1.17 ME created 03/06/00
WARRNING: NVRAM battery is either bad or just replaced!
Time Stamp [hour:min:sec] 33:30:02
Init POST BSS
Init System BSS
Probing system keyboard : Done
DMMU TLB Tags
DMMU TLB Tag Access Test
DMMU TLB RAM
DMMU TLB RAM Access Test
Ecache Tests
Probe Ecache
ecache_size = 0x00200000
Ecache RAM Addr Test
Ecache Tag Addr Test
Ecache RAM Test
Ecache Tag Test
Invalidate Ecache Tags
All CPU Basic Tests
V9 Instruction Test
CPU Tick and Tick Compare Reg Test
CPU Soft Trap Test
CPU Softint Reg and Int Test
All Basic MMU Tests
DMMU Primary Context Reg Test
DMMU Secondary Context Reg Test
DMMU TSB Reg Test
DMMU Tag Access Reg Test
DMMU VA Watchpoint Reg Test
DMMU PA Watchpoint Reg Test
IMMU TSB Reg Test
IMMU Tag Access Reg Test
IMMU TLB RAM Access Test
IMMU TLB Tag Access Test
All Basic Cache Tests
Dcache RAM Test
Dcache Tag Test
Icache RAM Test
Icache Tag Test
Icache Next Test
Icache Predecode Test
UltraSPARC IIi MCU Control & Status Regs Init and Tests
Init UltraSPARC IIi MCU Control & Status Regs
CPU speed : 440 Mhz, mc1 set : 0x544cb9dd
Memory Probe and Init
Probe Memory
INFO: All the memory Group in 10 bit column mode
Group 0: 256MB
Group 1: 256MB
Group 2: 256MB
Group 3: 256MB
Malloc Post Memory
Init Post Memory
..........
Memory Addr w/ Ecache
Map PROM/STACK/NVRAM in DMMU
Load Post In Memory
Run POST from MEM
..........
loaded POST in memory
Update Master Stack/Frame Pointers
All FPU Basic Tests
FPU Regs Test
FPU State Reg Test
FPU Functional Test
FPU Trap Test
Memory Tests
Init Memory
...............
................
................
................
................
................
................
................
Memory Addr w/ Ecache Test
ECC Memory Addr Test
Block Memory Addr Test
Block Memory Test
...............
...............
................
................
................
................
................
................
................
................
................
................
................
................
................
................
ECC Blk Memory Test
...............
...............
................
................
................
................
................
................
................
................
................
................
................
................
................
................
All Basic UltraSPARC IIi PBM Tests
Init UltraSPARC IIi PBM
PIO Decoder and BCT Test
PCI Byte Enable Test
UltraSPARC IIi IOMMU Regs Test
UltraSPARC IIi IOMMU RAM NTA Test
UltraSPARC IIi IOMMU CAM NTA Test
UltraSPARC IIi IOMMU RAM Address Test
UltraSPARC IIi IOMMU CAM Address Test
IOMMU TLB Compare Test
IOMMU TLB Flush Test
PBM Control/Status Reg Test
PBM Diag Reg Test
UltraSPARC IIi PBM Regs Test
All Advanced CPU Tests
DMMU Hit/Miss Test
DMMU Little Endian Test
IU ASI Access Test
FPU ASI Access Test
Ecache Thrash Test
All CPU Error Reporting Tests
CPU Addr Align Trap Test
DMMU Access Priv Page Test
DMMU Write Protected Page Test
All Advanced UltraSPARC IIi PBM Tests
Init UltraSPARC IIi PBM
Consist DMA Wr, IOMMU hit Ebus Test
All Basic Cheerio Tests
Cheerio Ebus PCI Config Space Test
Cheerio Ethernet PCI Config Space Test
Cheerio Ebus Engine Reg Test
Cheerio Init
All Basic I2c Tests
Init i2c bus
Thermister Reading Test
Thermister Position Readings (in Hex)
CPU 0x4e
All Basic PCI-PCI Bridge Tests
PCI-PCI Bridge Config Space Test
All Basic Symbios 875 SCSI controller Tests
Symbios 875 SCSI controller PCI Config Space Test
Extended POST:
Start Extended POST : No EXT POST is found
Power On Selftest Completed
Status = 0000.0000.0000.0000 ffff.ffff.f100.1db0 019f.3333.3a50.0011
Software Power ON
@(#) SPARCengine(tm)Ultra CP 1500 3.10.27 ME created 2000/06/22 16:45
Enter Checking KB
ps/2 kbd check: 0000.0000.0000.00fe
Checking Sun KB
Clearing E$ Tags Done
Clearing I/D TLBs Done
Probing Memory
Group Info[0000.0000.0000.0003] : 0000.0000.0000.0110
Group Info[0000.0000.0000.0002] : 0000.0000.0000.0110
Group Info[0000.0000.0000.0001] : 0000.0000.0000.0110
Group Info[0000.0000.0000.0000] : 0000.0000.0000.0110
Done
Clearing Memory...Done
MEM BASE = 0000.0000.3800.0000
MEM SIZE = 0000.0000.0800.0000
MMUs ON
Copy Done
PC = 0000.01ff.f000.30dc
PC = 0000.0000.0000.3120
Decompressing into Memory Done
Size = 0000.0000.0008.7710
ttya initialized
flashprom flashprom Incorrect configuration checksum;
Setting NVRAM parameters to default values.
Setting diag-switch? NVRAM parameter to true
Reset Control: BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
UltraSPARC-IIi Version 9.1 (E$=2 MB) 2-2 module
Advanced PCI Bridge Version 1.3
Probing Memory Group #0 128 + 128 : 256 Megabytes
Probing Memory Group #1 128 + 128 : 256 Megabytes
Probing Memory Group #2 128 + 128 : 256 Megabytes
Probing Memory Group #3 128 + 128 : 256 Megabytes
Initialise 2nd I2c controller
Environmental monitoring: Enabled
i2c adc gpio gpio
i2c Probing Floppy: No drives detected
Probing /pci@1f,0/pci@1,1 at Device 1 network
Probing /pci@1f,0/pci@1,1 at Device 2 scsi disk tape
Probing /pci@1f,0/pci@1,1 at Device 3 network
Probing /pci@1f,0/pci@1 at Device 1 pci
Probing /pci@1f,0/pci@1/pci@1 at Device 0 Nothing there
Probing /pci@1f,0/pci@1/pci@1 at Device 1 Nothing there
Probing /pci@1f,0/pci@1/pci@1 at Device 2 Nothing there
Probing /pci@1f,0/pci@1/pci@1 at Device 3 Nothing there
Probing /pci@1f,0/pci@1/pci@1 at Device 4 Nothing there
Probing /pci@1f,0/pci@1/pci@1 at Device 5 Nothing there
Probing /pci@1f,0/pci@1/pci@1 at Device 6 Nothing there
Probing /pci@1f,0/pci@1/pci@1 at Device 7 Nothing there
Probing /pci@1f,0/pci@1/pci@1 at Device 8 Nothing there
Probing /pci@1f,0/pci@1/pci@1 at Device 9 Nothing there
Probing /pci@1f,0/pci@1/pci@1 at Device a Nothing there
Probing /pci@1f,0/pci@1/pci@1 at Device b Nothing there
Probing /pci@1f,0/pci@1/pci@1 at Device c Nothing there
Probing /pci@1f,0/pci@1/pci@1 at Device d Nothing there
Probing /pci@1f,0/pci@1/pci@1 at Device e Nothing there
Probing /pci@1f,0/pci@1/pci@1 at Device f Nothing there
Netra t1 (UltraSPARC-IIi 440MHz), No Keyboard
OpenBoot 3.10.27 ME, 1024 MB memory installed, Serial #12731976.
Ethernet address 8:0:20:c2:46:48, Host ID: 80c24648.
Boot device: net File and args:
Using External Transceiver - Link Up.
3a000
Server IP address: 172.16.35.58
Client IP address: 172.16.35.33
Using External Transceiver - Link Up.
ramdisk-root |
Well at this point the machine will try to boot the diag-device which is
simply "net" and yes the machine can netboot fine. That works.
I will break and stop it and then boot local linux and we get a machine
with well tested ECC memory.
--
Dennis Clarke
RISC-V/SPARC/PPC/ARM/CISC
UNIX and Linux spoken
GreyBeard and suspenders optional