>Hallo,
>
>ich versuche, unter potato einen ISDN-Zugang zu
>konfigurieren und gehe dabei nach dem "Debian
>GNU/Linux Anwenderhandbuch" vor. Die ISDN-Karte
>ist eine FRITZ!-Card PCI.
         Die hab ich auch ....
>Da ich nicht wu�te, wo man die Provider-
>Zugangsdaten eingibt, habe ich es mit pppconfig
>versucht (scheint aber wohl nur f�r Modems
>gedacht), in der Hoffnung, da� auch ISDN das
>verwenden kann.
         Die Zugangsdaten werden alle in der Datei "pap-secrets" in dem 
Verzeichnis /etc/ppp/
         angegeben.
         Format:
         "loginname" * "passwort"
         Der loginname muss dem Abschnitt "user = " in der ipppd.ippp0 
�bereinstimmen.
>Danach bin ich strikt nach der ISDN-Anleitung
>aus o.g. "Buch" vorgegangen.
>
>(als root)
>- modprobe isdn
>- modprobe hisax type=27 protocol=2
>- lsmod gibt:
>     Module               Size  Used by
>     hisax              129840    0  (unused)
>     isdn                81984    0  [hisax]
>     ne2k-pci             4072    1
>     8390                 6068    0  [ne2k-pci]
>     vfat                 8956    0  (unused)
>     fat                 28864    0  [vfat]
>
>- mit isdnconfig die Dateien ipppd.ippp0 und
>device.ippp0 erzeugt und editiert
         Soweit alles ok :-)
>- /etc/init.d/isdnutils stop
>- /etc/init.d/isdnutils start
>- ein route funktionierte nicht
>- ifconfig brachte (s.Anhang)
>- ping www.debian.org ging auch nicht
>
>Teile der /var/log/syslog habe ich angeh�ngt.
>Dem entnehme ich auch, da� etwas mit PAP bzw.
>CHAP nicht stimmt. W�re um etwaige Tipps dankbar.
>
>Lars Pfuhl
>--
>                    /"\  ASCII Ribbon Campaign
>                    \ /
>                     X         No HTML in
>                    / \       email & news
>
>eth0      Link encap:Ethernet  HWaddr 00:C0:DF:F4:5B:5E
>           inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:100
>           Interrupt:9 Base address:0xdc00
>
>ippp0     Link encap:Point-to-Point Protocol
>           inet addr:10.0.0.1  P-t-P:10.0.0.2  Mask:255.255.255.255
>           UP POINTOPOINT RUNNING NOARP  MTU:1500  Metric:1
>           RX packets:9 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:15 errors:2 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:30
         Ok ....
>lo        Link encap:Local Loopback
>           inet addr:127.0.0.1  Mask:255.0.0.0
>           UP LOOPBACK RUNNING  MTU:3924  Metric:1
>           RX packets:282 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:282 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:0
>
>Nov  1 19:43:14 zeus kernel: ISDN subsystem Rev: 
>1.100/1.84/1.114/1.63/none/1.4 loaded
>Nov  1 19:43:41 zeus kernel: HiSax: Linux Driver for passive ISDN cards
>Nov  1 19:43:41 zeus kernel: HiSax: Version 3.3e (module)
>Nov  1 19:43:41 zeus kernel: HiSax: Layer1 Revision 2.37
>Nov  1 19:43:41 zeus kernel: HiSax: Layer2 Revision 2.20
>Nov  1 19:43:41 zeus kernel: HiSax: TeiMgr Revision 2.13
>Nov  1 19:43:41 zeus kernel: HiSax: Layer3 Revision 2.10
>Nov  1 19:43:41 zeus kernel: HiSax: LinkLayer Revision 2.40
>Nov  1 19:43:41 zeus kernel: HiSax: Approval certification valid
>Nov  1 19:43:41 zeus kernel: HiSax: Approved with ELSA Quickstep series cards
>Nov  1 19:43:41 zeus kernel: HiSax: Approval registration numbers:
>Nov  1 19:43:41 zeus kernel: HiSax: German D133361J CETECOM ICT Services GmbH
>Nov  1 19:43:41 zeus kernel: HiSax: EU (D133362J) CETECOM ICT Services GmbH
>Nov  1 19:43:41 zeus kernel: HiSax: Approved with Eicon Technology Diva 
>2.01 PCI cards
>Nov  1 19:43:41 zeus kernel: HiSax: Total 1 card defined
>Nov  1 19:43:41 zeus kernel: HiSax: Card 1 Protocol EDSS1 Id=HiSax (0)
>Nov  1 19:43:41 zeus kernel: HiSax: AVM PCI driver Rev. 1.14
>Nov  1 19:43:41 zeus kernel: AVM PCI: stat 0x3020a
>Nov  1 19:43:41 zeus kernel: AVM PCI: Class A Rev 2
>Nov  1 19:43:41 zeus kernel: HiSax: AVM Fritz!PCI config irq:10 base:0xE000
>Nov  1 19:43:41 zeus kernel: AVM PCI: ISAC version (0): 2086/2186 V1.1
>Nov  1 19:43:41 zeus kernel: AVM Fritz PnP/PCI: IRQ 10 count 0
>Nov  1 19:43:41 zeus kernel: AVM Fritz PnP/PCI: IRQ 10 count 3
>Nov  1 19:43:41 zeus kernel: HiSax: DSS1 Rev. 2.23
>Nov  1 19:43:41 zeus kernel: HiSax: 2 channels added
>Nov  1 19:43:41 zeus kernel: HiSax: MAX_WAITING_CALLS added
>Nov  1 19:55:58 zeus kernel: isdn: Verbose-Level is 2
>Nov  1 19:55:58 zeus ipppd: info: no PAP secret entry for this user!
                                                         ^  da stehts :)= 
(pap-secrets)
>Nov  1 19:55:58 zeus ipppd: info: no CHAP secret entry for this user!
>Nov  1 19:55:58 zeus ipppd[669]: Found 1 device: /dev/ippp0
>Nov  1 19:55:58 zeus ipppd[670]: ipppd i2.2.10 (isdn4linux version of pppd 
>by MH) started
>Nov  1 19:55:58 zeus ipppd[670]: init_unit: 0
>Nov  1 19:55:58 zeus kernel: ippp, open, slot: 0, minor: 0, state: 0000
>Nov  1 19:55:58 zeus kernel: ippp_ccp: allocated reset data structure c158d800
>Nov  1 19:55:58 zeus ipppd[670]: Connect[0]: /dev/ippp0, fd: 8
>Nov  1 19:56:10 zeus kernel: OPEN: 10.0.0.1 -> 194.25.2.129 UDP, port: 
>1025 -> 53
>Nov  1 19:56:10 zeus kernel: ippp0: dialing 1 0191011...
>Nov  1 19:56:11 zeus kernel: isdn_net: ippp0 connected
>Nov  1 19:56:11 zeus kernel: isdn_net: chargetime of ippp0 now 111415
>Nov  1 19:56:11 zeus ipppd[670]: Local number: 3024727846, Remote number: 
>0191011, Type: outgoing
>Nov  1 19:56:11 zeus ipppd[670]: PHASE_WAIT -> PHASE_ESTABLISHED, ifunit: 
>0, linkunit: 0, fd: 8
>Nov  1 19:56:12 zeus kernel: ippp0: remote hangup
                                         ^    T-Online h�ngt auf ... Das 
Problem hat ich auch, schick mal deine ipppd.ippp0
                                                 mit. Daran wird es liegen.
>Nov  1 19:56:12 zeus kernel: ippp0: Chargesum is 0
>Nov  1 19:56:12 zeus ipppd[670]: Modem hangup
>Nov  1 19:56:12 zeus ipppd[670]: Connection terminated.
>Nov  1 19:56:12 zeus ipppd[670]: taking down PHASE_DEAD link 0, linkunit: 0
>Nov  1 19:56:12 zeus ipppd[670]: closing fd 8 from unit 0
>Nov  1 19:56:12 zeus kernel: ippp_ccp: freeing reset data structure c158d800
>Nov  1 19:56:12 zeus ipppd[670]: link 0 closed , linkunit: 0
>Nov  1 19:56:12 zeus ipppd[670]: reinit_unit: 0
>Nov  1 19:56:12 zeus kernel: ippp, open, slot: 0, minor: 0, state: 0000

Mit freundlichen Gr��en

Kai Wegner


---------------------------------------------------------
Um sich aus der Liste auszutragen schicken Sie bitte eine
E-Mail an [EMAIL PROTECTED] die im Body
"unsubscribe <deine_email_adresse>" enthaelt.
Bei Problemen bitte eine Mail an: [EMAIL PROTECTED]
---------------------------------------------------------

742 eingetragene Mitglieder in dieser Liste.

Antwort per Email an