Qiang Rao <[EMAIL PROTECTED]> writes: > And also one more thing, you said you can get the mouse to work, there > might be a very simple solution to this. On some linux distributions, > the mouse link is not setup correctly. To check this: > "cd /dev" > "ls -l mouse" > this will tell you if you have the mouse linked to the right device. If > you have a serial mouse on COM1 in dos, you want this file to link to > /dev/cua0.
Actually you want /dev/ttyS0. The /dev/cua0 devices are obsolete and might go away sometime. I prefer to set the mouse directly to the port it's on, so when I run gpmconfig I say "/dev/psaux" (a PS/2 bus mouse) for "Where is your mouse?", then "ps2" for "What type is your mouse?". (If I start using a different mouse port, it will probably have a different protocol anyway.) I've put "auto" in /etc/modules, and the psaux driver module gets loaded automatically. -- Carey Evans <*> http://home.clear.net.nz/pages/c.evans/ gc "Trust Ivanova. Trust yourself. Anybody else - shoot 'em." -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .