Hi Brian May; unless Mutt is confused, you wrote: > Also, this isn't the worst of my problems... If I try to bootup with > the card in, or shutdown, the computer will lock up, and require a > hardware reset in order to fix the problem. Inserting/removing the > card after bootup seems to be OK though. > > When I asked about this on the linux-kernel mailing list, somebody > suggested I replace the following parameter to my pcmcia.conf > file with: > > PCIC_OPTS='pci_csc=0' > > however, that doesn't help :-(. > > -- > Brian May <[EMAIL PROTECTED]>
A big guess, but are you guys sure you have no interrupt or similar conflicts? I have a problem with Xircom modem which sounds similar to the ones described in pcmcia-howto in relation to the interrupt conflict even though my /proc/interrupt doesn't show one. Changing the irq works (from line being hopelessly slow to te normal speed of 56k modem). HTH, damir