> A big guess, but are you guys sure you have no interrupt or similar > conflicts? I have a problem with Xircom modem which sounds similar to > the ones described in pcmcia-howto in relation to the interrupt conflict > even though my /proc/interrupt doesn't show one.
I have the same problem whenever I try to compile the most recent PCMCIA sources. Right now I'm running from pcmcia-cs.3.1.3 because all the newer once cause the problems mentioned by the first poster (everything seems OK but pppd can't get the modem). > Changing the irq works (from line being hopelessly slow to the normal > speed of 56k modem). What did you change the irq to, and how? I tried to do this by excluding IRQ's in the PCMCIA config.opts file but each time it still failed, until finally there were no IRQ's left and the serial module wouldn't load. I hope this goes away in 2.4 when PCMCIA is part of the kernel. . . Chris -- Christopher S. Swingley tel: 907-474-2689 fax: 474-2643 930 Koyukuk Drive, Suite 408C email: [EMAIL PROTECTED] University of Alaska Fairbanks www.frontier.iarc.uaf.edu:8080/ Fairbanks, AK 99775 ~cswingle PGP key: http://www.frontier.iarc.uaf.edu:8080/~cswingle/pubkey.asc