The Card is a DLINK 530TX (not the TX+) but the problem is that it has the newer via chipset (3065) so i need the updated via-rhine module..
Martin Würtele wrote: > > On Tue, Dec 05, 2000 at 11:42:26AM +1100, Stephen Lavelle wrote: > > Hello, > > I have just installed a DLINK 530TX Nic in a debian 2.2 box. > > This card uses the via-rhine module > > However when I do #insmod via-rhine > > I get: > > using /lib/modules/2.2.17/net/via-rhine.o > > /lib/modules/2.2.17/net/via-rhine.o: init_module: Device or resource > > busy > > Hint: this error can be caused by incorrect module parameters, including > > > > invalid IRQ... > > > > The output of #lspci for this device is: > > 00:10.0 Ethernet controller: VIA Technologies, Inc.: Unknown device 3065 > > > > (rev 4) > > > > I have looked at the drivers page at http://www.scyld.com and for this > > device I need the via-rhine module >1.07. Debian 2.2 only has version > > 1.01. > > scyld.com has a via-rhine.c file which is a correct version, but I > > cannot get this to compile. > > Is there a debianised version of vi-rhine.o? > > Am i barking up the wrong tree completely > > is use it with kernel 2.4.0-test9 and it works fine. > > hth martin -- mailto:[EMAIL PROTECTED]
