On Sat, 2002-06-15 at 06:18, [EMAIL PROTECTED] wrote: > Dear all, > > I installed Debian 2.2r6, installed a ppp-dialup link. This works fine with > 'pon provider' > I automated it with diald so it responds when there is an ISP-request an > brings the link > down after som idle time. So far, so good. > > I recently installed a new kernel 2.4.18. This look OK, but diald is dead > (process is running thou). It won't respond > to commands such as 'lynx', 'route' etc..... Everything look the same as with > 2.2r6. Same scripts are there, > diald-process is running. > > Reinstalled diald while 2.4.18 is active, no change. ppp is working fine (pon > provider establishes the link). Running 2.2r6 > (2.2.20 kernel) everything works fine, including diald. > > What could be the problem here? Any clues? > > Anybody could help a little??? 2.2r* was not made to run with a 2.4.x kernel. You will have to dist-upgrade to woody before you will be able to run with a 2.4.x kernel. I would recommend upgrading to woody anyway because it will soon be the stable branch anyway. This should fix your problems with using a 2.4.18 kernel and diald not working together. -- -Peace kid Scott Henson [EMAIL PROTECTED]
"God's the ultimate playa, so naturally He's going to have some haters," rapper Ice Cube said. "But these haters need to realize that if you mess with the man upstairs, you will get your ass smote. True dat." -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
