Chris Parker wrote:
On Tuesday 13 September 2005 01:36 pm, Joseph H. Fry wrote:
Chris Parker wrote:
First off - kern = 2.6.8-2-i686
Package: xserver-xfree86
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 15616
Maintainer: Debian X Strike Force <[email protected]>
Architecture: i386
Source: xfree86
Version: 4.3.0.dfsg.1-14
--------------------------------------
gnome resolution set at 800x600 will not go to 1024x768
# XF86Config-4 (XFree86 X Window System server configuration
file) #
# This file was generated by dexconf, the Debian X Configuration
tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual
page. # (Type "man XF86Config-4" at the shell prompt.)
#
# This file is automatically updated on xserver-xfree86 package
upgrades *only*
# if it has not been modified since the last upgrade of the
xserver-xfree86
# package.
#
# If you have edited this file but would like it to be
automatically updated
# again, run the following commands as root:
#
# cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom
# md5sum /etc/X11/XF86Config-4
/var/lib/xfree86/XF86Config-4.md5sum # dpkg-reconfigure
xserver-xfree86
Section "Files"
FontPath "unix/:7100" # local
font server
# if the local font server has problems, we can fall back
on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "Generic Video Card"
Driver "vesa"
BusID "PCI:0:2:0"
# VideoRam 16384
EndSection
Section "Monitor"
Identifier "MX70"
HorizSync 30-70
VertRefresh 47-120
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "MX70"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024X768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024X768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024X768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024X768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024X768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024X768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
#Section "DRI"
# Mode 0666
#EndSection
------------------------------------------------------------------
-----
where is setting to change resolution ??
thanks
Try removing the "DPMS" option on your monitor... otherwise your
config is correct to default to 1024x768
tried that -still doesnt work. here is a lspci list.
0000:00:02.0 VGA compatible controller: Intel Corp.
82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01)
(prog-if 00 [VGA])
Subsystem: Asustek Computer, Inc.: Unknown device 8093
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 177
Region 0: Memory at e8000000 (32-bit, prefetchable)
[size=128M]
Region 1: Memory at e7800000 (32-bit, non-prefetchable)
[size=512K]
Capabilities: <available only to root>
---------------------------------------------------------------
would the i810 driver be better than vesa?
also if i ctrl+alt+f? out of X when I try to go back all there is is a
blank screen?
in kinfo- shows the xserver in a 800x600 default res. where does it
source this info?
thanks again
I'd give that driver a shot, certainly can't hurt to try... it's what
I'm using. I'm no expert, so perhaps someone with more experience can
chime in here!
Good Luck
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
