Csanyi Pal <[email protected]> writes: > Brian <[email protected]> writes: > >> On Wed 17 Jul 2013 at 11:33:48 +0200, Csanyi Pal wrote: >> >>> Brian <[email protected]> writes: >>> >>> > The foo2zjs documentation mentions firmware; your printer appears to >>> > require it. Is firmware on the system and loaded to the printer? >>> >>> I have uploaded it now, by using hannah-foo2zjs GUI, and later I used >>> 'sudo getweb 1018' command also. >> >> Check it gets loaded into the printer. The final post at >> >> http://foo2zjs.rkkda.com/forum/read.php?9,3553 >> >> should help. Please also read usb_printerid(1). > > # usb_printerid /dev/usb/lp0 > Error: No such device: can't open '/dev/usb/lp0'
I have another problewm with USB ports when booting, I get messages, like: usb 1-4: device descriptor read/64, error -110 I find on Google the solution for this: one must power off the PC Box, unplug the power cable, wait 5 minutes, and boot again. After this, I get another messages, when run: # usb_printerid /dev/usb/lp0 Error: Input/output error: GET_DEVICE_ID on '/dev/usb/lp0' -- Regards from Pal -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
