On Saturday 01 November 2003 12:03, Kurt Sys wrote: > Hello, > > I have to install a new computer. I install Debian Woody (3.0r1) from > boot-CD (CD1 -- NON-US). Everything works fine except for one thing, I > can't get my ethernet card to work. I found on the net several people with > similar or the same problem, but I don't find an answer. So, here it is > (again). > The network card is a D-link DFE-530tx. Following different sources, I need > the via-rhine module, but this won't work. Any other driver also doesn't > work. Below, I give some outputs which may be helpful. > > What should be my next step?
If you don't get more useful help from the experts, you could try Knoppix. Boot the Knoppix CD: if it recognises your NIC, you can install to the hard drive and then adjust the installation to suit your inclinations. It worked for me when all else (that I felt competent to try) failed... -- richard -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]