Hello Kurt Sys (<[EMAIL PROTECTED]>) wrote:
> I have to install a new computer. I install Debian Woody (3.0r1) from > boot-CD (CD1 -- NON-US). Everything works fine except for one thing, I > can't get my ethernet card to work. I found on the net several people > with similar or the same problem, but I don't find an answer. So, here > it is (again). The network card is a D-link DFE-530tx. Following > different sources, I need the via-rhine module, but this won't work. > Any other driver also doesn't work. Below, I give some outputs which > may be helpful. > > What should be my next step? The next spet I would try is to install using another kernel. Debian offers several installation kernels on the first CD, including 2.4.18-bf2.4. Read the instructions after you boot from the CD. If you already installed the system and everything works fine except the network card, install some other kernel image via apt-get and try that one. However most of the kernel images in packaged form are on CD 5. best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 Registered Linux User #267976 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]