On Sun, 18 Jun 2023, Mario Marietto wrote:
Hello.
Maybe a little problem for you,but a bigger problem for me. I've
debootstrapped jessie on Ubuntu 14.04 with this command :
debootstrap --foreign --arch=armhf jessie jessie-armhf
http://archive.debian.org/debian
and it worked ok,but when I try to chroot within it :
root@marietto-Z87-HD3:/home/marietto/Scrivania/Chromebook/linux-distros#
chroot ./jessie-armhf /bin/bash
it gives the following error :
chroot: can't execute command "/bin/bash": No such file or directory
but I see the file bash within the directory /bin of the debootstrapped
directory called "jessie-armhf". What could be the problem ? thanks.
I'm not familiar with debootstrap and --foreign, but don't you have to
run stage2 install on the foreign architecture?
Try chroot with a dash shell - that should work. I'm not sure if bash needs
some configure scripts running before it's usable
FWIW, I have my own installer and I do weekly installs of jessie armel
on amd64 without problems - but I use qemu to emulate the processor.
No idea if this is of any use but below is my log of the install. There are a
handful of "~tjw" packages, these are almost identical to the real packages,
just have some dependencies and tweaks so that apt can work out an unpack and
configure order for the entire system and to a very large extent the install
uses only apt and dpkg. By the time the log below gets to:
Phase 1 UNTAR bootstrap-essential_1686529226.0+bootstrap_*.deb
there's enough system setup that I can chroot (using dash at this point)
(bootstrap-essential is just a package that depends on the other packages that
need to be installed to get to this point.)
$ cat build-deb-tarfile-jessie-armel.log
Get:1 http://aptmirror17.home.woodall.me.uk/clean jessie InRelease [6994 B]
Ign:2 http://archive.debian.org/debian jessie InRelease
Get:3 http://aptmirror17.home.woodall.me.uk/clean jessie/bootstrap armel
Packages [4180 B]
Get:4 http://archive.debian.org/debian-security jessie/updates InRelease [44.9
kB]
Get:5 http://archive.debian.org/debian jessie Release [148 kB]
Get:6 http://archive.debian.org/debian jessie Release.gpg [2420 B]
Get:7 http://archive.debian.org/debian-security jessie/updates/main Sources
[366 kB]
Get:8 http://archive.debian.org/debian-security jessie/updates/main armel
Packages [763 kB]
Get:9 http://archive.debian.org/debian-security jessie/updates/main
Translation-en [401 kB]
Ign:6 http://archive.debian.org/debian jessie Release.gpg
Get:10 http://archive.debian.org/debian jessie/main Sources [7063 kB]
Get:11 http://archive.debian.org/debian jessie/main armel Packages [6676 kB]
Get:12 http://archive.debian.org/debian jessie/main Translation-en [4581 kB]
Fetched 20.1 MB in 9s (2198 kB/s)
Reading package lists...
W: GPG error: http://archive.debian.org/debian jessie Release: The following signatures were
invalid: EXPKEYSIG 8B48AD6246925553 Debian Archive Automatic Signing Key (7.0/wheezy)
<ftpmas...@debian.org> EXPKEYSIG 7638D0442B90D010 Debian Archive Automatic Signing Key
(8/jessie) <ftpmas...@debian.org> EXPKEYSIG CBF8D6FD518E17E1 Jessie Stable Release Key
<debian-rele...@lists.debian.org> 75DDC3C4A499F1A18CB5F3C8CBF8D6FD518E17E1
W: The repository 'http://archive.debian.org/debian jessie Release' is not
signed.
Check rebuild minimal.tar.xz
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
apt base-files base-passwd bash bsdutils coreutils dash debconf debconf-i18n
debian-archive-keyring debianutils diffutils dpkg e2fslibs e2fsprogs
findutils gcc-4.8-base gcc-4.9-base gnupg gpgv grep gzip hostname init
init-system-helpers initscripts insserv libacl1 libapt-pkg4.12 libattr1
libaudit-common libaudit1 libblkid1 libbz2-1.0 libc-bin libc6 libcomerr2
libdb5.3 libdebconfclient0 libgcc1 libgcrypt20 libgpg-error0
liblocale-gettext-perl liblzma5 libmount1 libncurses5 libpam-modules
libpam-modules-bin libpam-runtime libpam0g libpcre3 libreadline6 libselinux1
libsemanage-common libsemanage1 libsepol1 libslang2 libsmartcols1 libss2
libstdc++6 libsystemd0 libtext-charwidth-perl libtext-iconv-perl
libtext-wrapi18n-perl libtinfo5 libusb-0.1-4 libustr-1.0-1 libuuid1 login
lsb-base mawk mount multiarch-support ncurses-base ncurses-bin passwd
perl-base readline-common sed sensible-utils startpar sysv-rc sysvinit-core
sysvinit-utils tar tzdata util-linux zlib1g
Suggested packages:
aptitude | synaptic | wajig dpkg-dev apt-doc python-apt bash-doc debconf-doc
debconf-utils whiptail | dialog | gnome-utils libterm-readline-gnu-perl
libgtk2-perl libnet-ldap-perl perl libqtgui4-perl libqtcore4-perl
diffutils-doc wdiff gpart parted e2fsck-static mlocate | locate gnupg-doc
libpcsclite1 parcimonie xloadimage | imagemagick | eog less bootchart2
glibc-doc locales rng-tools libpam-doc nfs-common readline-doc bum bootlogd
sash bzip2 ncompress xz-utils tar-scripts dosfstools kbd | console-tools
util-linux-locales
Recommended packages:
bash-completion bsdmainutils apt-utils gnupg-curl libldap-2.4-2 psmisc
libgpm2 libpng12-0 uuid-runtime
The following NEW packages will be installed:
apt base-files base-passwd bash bootstrap-essential bootstrap-required
bsdutils coreutils dash debconf debconf-i18n debian-archive-keyring
debianutils diffutils dpkg e2fslibs e2fsprogs findutils gcc-4.8-base
gcc-4.9-base gnupg gpgv grep gzip hostname init init-system-helpers
initscripts insserv libacl1 libapt-pkg4.12 libattr1 libaudit-common
libaudit1 libblkid1 libbz2-1.0 libc-bin libc6 libcomerr2 libdb5.3
libdebconfclient0 libgcc1 libgcrypt20 libgpg-error0 liblocale-gettext-perl
liblzma5 libmount1 libncurses5 libpam-modules libpam-modules-bin
libpam-runtime libpam0g libpcre3 libreadline6 libselinux1 libsemanage-common
libsemanage1 libsepol1 libslang2 libsmartcols1 libss2 libstdc++6 libsystemd0
libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libtinfo5
libusb-0.1-4 libustr-1.0-1 libuuid1 login lsb-base mawk mount
multiarch-support ncurses-base ncurses-bin passwd perl-base readline-common
sed sensible-utils startpar sysv-rc sysvinit-core sysvinit-utils tar tzdata
util-linux zlib1g
0 upgraded, 90 newly installed, 0 to remove and 0 not upgraded.
Need to get 29.2 MB of archives.
After this operation, 92.4 MB of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
multiarch-support libc6 sensible-utils liblzma5 libpcre3 libselinux1
libattr1 libacl1 dpkg libtinfo5 libncurses5 libgpg-error0 bsdutils coreutils
diffutils libaudit-common libaudit1 debconf libpam0g libsemanage-common
libsepol1 libustr-1.0-1 libsemanage1 libdb5.3 libpam-modules-bin
libpam-modules libpam-runtime login libuuid1 libblkid1 libmount1 libslang2
libsmartcols1 lsb-base startpar sysvinit-utils insserv sysv-rc initscripts
init-system-helpers findutils grep gzip hostname sysvinit-core init mount
ncurses-bin sed libdebconfclient0 base-passwd libc-bin ncurses-base gpgv
debian-archive-keyring readline-common libreadline6 libusb-0.1-4 gnupg mawk
liblocale-gettext-perl libtext-iconv-perl libtext-charwidth-perl
libtext-wrapi18n-perl debconf-i18n gcc-4.8-base
Authentication warning overridden.
Get:1 http://archive.debian.org/debian-security jessie/updates/main armel
gcc-4.9-base armel 4.9.2-10+deb8u2 [160 kB]
Get:2 http://aptmirror17.home.woodall.me.uk/clean jessie/bootstrap armel
debianutils armel 4.4+b1~tjw.1686529226.0+bootstrap [97.9 kB]
Get:3 http://aptmirror17.home.woodall.me.uk/clean jessie/bootstrap armel dash
armel 0.5.7-4+b1~tjw.1686529226.0+bootstrap [102 kB]
Get:4 http://archive.debian.org/debian jessie/main armel multiarch-support
armel 2.19-18+deb8u10 [181 kB]
Get:5 http://aptmirror17.home.woodall.me.uk/clean jessie/bootstrap armel
base-files armel 8+deb8u11~tjw.1686529226.0+bootstrap [57.5 kB]
Get:6 http://archive.debian.org/debian-security jessie/updates/main armel
libgcc1 armel 1:4.9.2-10+deb8u2 [41.4 kB]
Get:7 http://archive.debian.org/debian jessie/main armel libc6 armel
2.19-18+deb8u10 [4133 kB]
Get:8 http://aptmirror17.home.woodall.me.uk/clean jessie/bootstrap armel passwd
armel 1:4.2-3+deb8u4~tjw.1686529226.0+bootstrap [928 kB]
Get:9 http://aptmirror17.home.woodall.me.uk/clean jessie/bootstrap armel
util-linux armel 2.25.2-6~tjw.1686529226.0+bootstrap [795 kB]
Get:10 http://aptmirror17.home.woodall.me.uk/clean jessie/bootstrap armel apt
armel 1.0.9.8.6~tjw.1686529226.0+bootstrap [1069 kB]
Get:11 http://archive.debian.org/debian jessie/main armel sensible-utils all
0.0.9+deb8u1 [10.9 kB]
Get:12 http://archive.debian.org/debian-security jessie/updates/main armel
libbz2-1.0 armel 1.0.6-7+deb8u2 [44.3 kB]
Get:13 http://archive.debian.org/debian jessie/main armel liblzma5 armel
5.1.1alpha+20120614-2+b3 [187 kB]
Get:14 http://archive.debian.org/debian jessie/main armel libpcre3 armel
2:8.35-3.3+deb8u4 [299 kB]
Get:15 http://archive.debian.org/debian jessie/main armel libselinux1 armel
2.3-2 [81.9 kB]
Get:16 http://archive.debian.org/debian-security jessie/updates/main armel
zlib1g armel 1:1.2.8.dfsg-2+deb8u1 [82.3 kB]
Get:17 http://archive.debian.org/debian jessie/main armel libattr1 armel
1:2.4.47-2 [17.1 kB]
Get:18 http://aptmirror17.home.woodall.me.uk/clean jessie/bootstrap armel
bootstrap-essential armel 1686529226.0+bootstrap [872 B]
Get:19 http://archive.debian.org/debian jessie/main armel libacl1 armel
2.2.52-2 [25.2 kB]
Get:20 http://archive.debian.org/debian-security jessie/updates/main armel tar
armel 1.27.1-2+deb8u2 [649 kB]
Get:21 http://aptmirror17.home.woodall.me.uk/clean jessie/bootstrap armel
bootstrap-required armel 1686529226.0+bootstrap [1156 B]
Get:22 http://archive.debian.org/debian jessie/main armel dpkg armel 1.17.27
[2929 kB]
Get:23 http://archive.debian.org/debian jessie/main armel libtinfo5 armel
5.9+20140913-1+deb8u3 [271 kB]
Get:24 http://archive.debian.org/debian jessie/main armel libncurses5 armel
5.9+20140913-1+deb8u3 [78.9 kB]
Get:25 http://archive.debian.org/debian-security jessie/updates/main armel bash
armel 4.3-11+deb8u2 [1093 kB]
Get:26 http://archive.debian.org/debian jessie/main armel libgpg-error0 armel
1.17-3 [90.9 kB]
Get:27 http://archive.debian.org/debian-security jessie/updates/main armel
libgcrypt20 armel 1.6.3-2+deb8u8 [343 kB]
Get:28 http://archive.debian.org/debian-security jessie/updates/main armel
libsystemd0 armel 215-17+deb8u13 [86.6 kB]
Get:29 http://archive.debian.org/debian jessie/main armel bsdutils armel
1:2.25.2-6 [93.8 kB]
Get:30 http://archive.debian.org/debian jessie/main armel coreutils armel
8.23-4 [2605 kB]
Get:31 http://archive.debian.org/debian jessie/main armel diffutils armel
1:3.3-1+b1 [255 kB]
Get:32 http://archive.debian.org/debian-security jessie/updates/main armel
e2fslibs armel 1.42.12-2+deb8u2 [174 kB]
Get:33 http://archive.debian.org/debian jessie/main armel libaudit-common all
1:2.4-1 [13.5 kB]
Get:34 http://archive.debian.org/debian jessie/main armel libaudit1 armel
1:2.4-1+b1 [42.0 kB]
Get:35 http://archive.debian.org/debian-security jessie/updates/main armel
perl-base armel 5.20.2-3+deb8u12 [1102 kB]
Get:36 http://archive.debian.org/debian jessie/main armel debconf all
1.5.56+deb8u1 [167 kB]
Get:37 http://archive.debian.org/debian jessie/main armel libpam0g armel
1.1.8-3.1+deb8u2+b1 [122 kB]
Get:38 http://archive.debian.org/debian jessie/main armel libsemanage-common
all 2.3-1 [24.6 kB]
Get:39 http://archive.debian.org/debian jessie/main armel libsepol1 armel 2.3-2
[113 kB]
Get:40 http://archive.debian.org/debian jessie/main armel libustr-1.0-1 armel
1.0.4-3+b2 [60.4 kB]
Get:41 http://archive.debian.org/debian jessie/main armel libsemanage1 armel
2.3-1+b1 [78.6 kB]
Get:42 http://archive.debian.org/debian jessie/main armel libdb5.3 armel
5.3.28-9+deb8u1 [575 kB]
Get:43 http://archive.debian.org/debian jessie/main armel libpam-modules-bin
armel 1.1.8-3.1+deb8u2+b1 [101 kB]
Get:44 http://archive.debian.org/debian jessie/main armel libpam-modules armel
1.1.8-3.1+deb8u2+b1 [287 kB]
Get:45 http://archive.debian.org/debian jessie/main armel libpam-runtime all
1.1.8-3.1+deb8u2 [212 kB]
Get:46 http://archive.debian.org/debian jessie/main armel login armel
1:4.2-3+deb8u4 [718 kB]
Get:47 http://archive.debian.org/debian jessie/main armel libuuid1 armel
2.25.2-6 [64.3 kB]
Get:48 http://archive.debian.org/debian jessie/main armel libblkid1 armel
2.25.2-6 [148 kB]
Get:49 http://archive.debian.org/debian-security jessie/updates/main armel
libcomerr2 armel 1.42.12-2+deb8u2 [59.9 kB]
Get:50 http://archive.debian.org/debian-security jessie/updates/main armel
libss2 armel 1.42.12-2+deb8u2 [63.3 kB]
Get:51 http://archive.debian.org/debian jessie/main armel libmount1 armel
2.25.2-6 [151 kB]
Get:52 http://archive.debian.org/debian jessie/main armel libslang2 armel
2.3.0-2 [451 kB]
Get:53 http://archive.debian.org/debian jessie/main armel libsmartcols1 armel
2.25.2-6 [104 kB]
Get:54 http://archive.debian.org/debian jessie/main armel lsb-base all
4.1+Debian13+nmu1 [26.7 kB]
Get:55 http://archive.debian.org/debian jessie/main armel startpar armel 0.59-3
[21.8 kB]
Get:56 http://archive.debian.org/debian jessie/main armel sysvinit-utils armel
2.88dsf-59 [82.0 kB]
Get:57 http://archive.debian.org/debian jessie/main armel insserv armel
1.14.0-5 [63.8 kB]
Get:58 http://archive.debian.org/debian jessie/main armel sysv-rc all
2.88dsf-59 [82.8 kB]
Get:59 http://archive.debian.org/debian jessie/main armel initscripts armel
2.88dsf-59 [87.0 kB]
Get:60 http://archive.debian.org/debian-security jessie/updates/main armel
tzdata all 2019c-0+deb8u1 [234 kB]
Get:61 http://archive.debian.org/debian jessie/main armel init-system-helpers
all 1.22 [14.0 kB]
Get:62 http://archive.debian.org/debian-security jessie/updates/main armel
e2fsprogs armel 1.42.12-2+deb8u2 [732 kB]
Get:63 http://archive.debian.org/debian jessie/main armel findutils armel
4.4.2-9+b1 [434 kB]
Get:64 http://archive.debian.org/debian jessie/main armel grep armel 2.20-4.1
[314 kB]
Get:65 http://archive.debian.org/debian jessie/main armel gzip armel 1.6-4 [104
kB]
Get:66 http://archive.debian.org/debian jessie/main armel hostname armel 3.15
[13.4 kB]
Get:67 http://archive.debian.org/debian jessie/main armel sysvinit-core armel
2.88dsf-59 [128 kB]
Get:68 http://archive.debian.org/debian jessie/main armel init armel 1.22 [4664
B]
Get:69 http://archive.debian.org/debian jessie/main armel mount armel 2.25.2-6
[165 kB]
Get:70 http://archive.debian.org/debian jessie/main armel ncurses-bin armel
5.9+20140913-1+deb8u3 [344 kB]
Get:71 http://archive.debian.org/debian jessie/main armel sed armel
4.2.2-4+deb8u1 [237 kB]
Get:72 http://archive.debian.org/debian jessie/main armel libdebconfclient0
armel 0.192 [46.0 kB]
Get:73 http://archive.debian.org/debian jessie/main armel base-passwd armel
3.5.37 [64.7 kB]
Get:74 http://archive.debian.org/debian jessie/main armel libc-bin armel
2.19-18+deb8u10 [1210 kB]
Get:75 http://archive.debian.org/debian jessie/main armel ncurses-base all
5.9+20140913-1+deb8u3 [222 kB]
Get:76 http://archive.debian.org/debian-security jessie/updates/main armel
libstdc++6 armel 4.9.2-10+deb8u2 [235 kB]
Get:77 http://archive.debian.org/debian-security jessie/updates/main armel
libapt-pkg4.12 armel 1.0.9.8.6 [717 kB]
Get:78 http://archive.debian.org/debian jessie/main armel gpgv armel
1.4.18-7+deb8u5 [178 kB]
Get:79 http://archive.debian.org/debian jessie/main armel
debian-archive-keyring all 2017.5~deb8u1 [56.7 kB]
Get:80 http://archive.debian.org/debian jessie/main armel readline-common all
6.3-8 [57.7 kB]
Get:81 http://archive.debian.org/debian jessie/main armel libreadline6 armel
6.3-8+b3 [123 kB]
Get:82 http://archive.debian.org/debian jessie/main armel libusb-0.1-4 armel
2:0.1.12-25 [20.3 kB]
Get:83 http://archive.debian.org/debian jessie/main armel gnupg armel
1.4.18-7+deb8u5 [1071 kB]
Get:84 http://archive.debian.org/debian jessie/main armel mawk armel 1.3.3-17
[84.1 kB]
Get:85 http://archive.debian.org/debian jessie/main armel
liblocale-gettext-perl armel 1.05-8+b1 [18.5 kB]
Get:86 http://archive.debian.org/debian jessie/main armel libtext-iconv-perl
armel 1.7-5+b2 [15.6 kB]
Get:87 http://archive.debian.org/debian jessie/main armel
libtext-charwidth-perl armel 0.04-7+b3 [10.3 kB]
Get:88 http://archive.debian.org/debian jessie/main armel libtext-wrapi18n-perl
all 0.06-7 [9004 B]
Get:89 http://archive.debian.org/debian jessie/main armel debconf-i18n all
1.5.56+deb8u1 [206 kB]
Get:90 http://archive.debian.org/debian jessie/main armel gcc-4.8-base armel
4.8.4-1 [155 kB]
Fetched 29.2 MB in 1s (24.8 MB/s)
Download complete and in download only mode
Rebuilding /mnt/mirror/ftp/mirror/clean/tarfiles/jessie.armel.minimal.tar.xz -
newest dependency is -rw-r--r-- 1 apt-mirror apt-mirror 717180 May 14 2020
/mnt/mirror/ftp/mirror/tmp/apt.qUrQJE2QoW/jessie/armel/archives/libapt-pkg4.12_1.0.9.8.6_armel.deb
Inst gcc-4.9-base 4.9.2-10+deb8u2
Conf gcc-4.9-base 4.9.2-10+deb8u2
Inst multiarch-support 2.19-18+deb8u10
Inst libc6 2.19-18+deb8u10
Conf libc6:armel broken
Conf multiarch-support 2.19-18+deb8u10
Inst libgcc1 1%3a4.9.2-10+deb8u2
Conf libgcc1 1%3a4.9.2-10+deb8u2
Inst libattr1 1%3a2.4.47-2
Conf libattr1 1%3a2.4.47-2
Inst libacl1 2.2.52-2
Conf libacl1 2.2.52-2
Inst libpcre3 2%3a8.35-3.3+deb8u4
Conf libpcre3 2%3a8.35-3.3+deb8u4
Inst libselinux1 2.3-2
Conf libselinux1 2.3-2
Inst coreutils 8.23-4
Conf coreutils 8.23-4
Inst sensible-utils 0.0.9+deb8u1
Conf sensible-utils 0.0.9+deb8u1
Inst debianutils 4.4+b1~tjw.1686529226.0+bootstrap
Conf debianutils 4.4+b1~tjw.1686529226.0+bootstrap
Inst libbz2-1.0 1.0.6-7+deb8u2
Conf libbz2-1.0 1.0.6-7+deb8u2
Inst liblzma5 5.1.1alpha+20120614-2+b3
Conf liblzma5 5.1.1alpha+20120614-2+b3
Inst zlib1g 1%3a1.2.8.dfsg-2+deb8u1
Conf zlib1g 1%3a1.2.8.dfsg-2+deb8u1
Inst tar 1.27.1-2+deb8u2
Conf tar 1.27.1-2+deb8u2
Inst dpkg 1.17.27
Conf dpkg 1.17.27
Inst dash 0.5.7-4+b1~tjw.1686529226.0+bootstrap
Conf dash 0.5.7-4+b1~tjw.1686529226.0+bootstrap
Inst findutils 4.4.2-9+b1
Conf findutils 4.4.2-9+b1
Inst grep 2.20-4.1
Conf grep 2.20-4.1
Inst sed 4.2.2-4+deb8u1
E: Conf Broken libc6:armel
Conf sed 4.2.2-4+deb8u1
Inst base-files 8+deb8u11~tjw.1686529226.0+bootstrap
Conf base-files 8+deb8u11~tjw.1686529226.0+bootstrap
Inst libdebconfclient0 0.192
Conf libdebconfclient0 0.192
Inst base-passwd 3.5.37
Conf base-passwd 3.5.37
Inst libc-bin 2.19-18+deb8u10
Conf libc-bin 2.19-18+deb8u10
Inst bootstrap-essential 1686529226.0+bootstrap
Conf bootstrap-essential 1686529226.0+bootstrap
Inst gcc-4.9-base 4.9.2-10+deb8u2
Conf gcc-4.9-base 4.9.2-10+deb8u2
Inst multiarch-support 2.19-18+deb8u10
Inst libc6 2.19-18+deb8u10
Conf libc6:armel broken
Conf multiarch-support 2.19-18+deb8u10
Inst libgcc1 1%3a4.9.2-10+deb8u2
Conf libgcc1 1%3a4.9.2-10+deb8u2
Inst libbz2-1.0 1.0.6-7+deb8u2
Conf libbz2-1.0 1.0.6-7+deb8u2
Inst liblzma5 5.1.1alpha+20120614-2+b3
Conf liblzma5 5.1.1alpha+20120614-2+b3
Inst libpcre3 2%3a8.35-3.3+deb8u4
Conf libpcre3 2%3a8.35-3.3+deb8u4
Inst libselinux1 2.3-2
Conf libselinux1 2.3-2
Inst zlib1g 1%3a1.2.8.dfsg-2+deb8u1
Conf zlib1g 1%3a1.2.8.dfsg-2+deb8u1
Inst libattr1 1%3a2.4.47-2
Conf libattr1 1%3a2.4.47-2
Inst libacl1 2.2.52-2
Conf libacl1 2.2.52-2
Inst tar 1.27.1-2+deb8u2
Conf tar 1.27.1-2+deb8u2
Inst dpkg 1.17.27
Conf dpkg 1.17.27
Inst libstdc++6 4.9.2-10+deb8u2
Conf libstdc++6 4.9.2-10+deb8u2
Inst libapt-pkg4.12 1.0.9.8.6
Conf libapt-pkg4.12 1.0.9.8.6
Inst gpgv 1.4.18-7+deb8u5
Conf gpgv 1.4.18-7+deb8u5
Inst debian-archive-keyring 2017.5~deb8u1
Conf debian-archive-keyring 2017.5~deb8u1
Inst readline-common 6.3-8
Conf readline-common 6.3-8
Inst libtinfo5 5.9+20140913-1+deb8u3
Conf libtinfo5 5.9+20140913-1+deb8u3
Inst libreadline6 6.3-8+b3
Conf libreadline6 6.3-8+b3
E: Conf Broken libc6:armel
Inst libusb-0.1-4 2%3a0.1.12-25
Conf libusb-0.1-4 2%3a0.1.12-25
Inst gnupg 1.4.18-7+deb8u5
Conf gnupg 1.4.18-7+deb8u5
Inst mawk 1.3.3-17
Conf mawk 1.3.3-17
Inst apt 1.0.9.8.6~tjw.1686529226.0+bootstrap
Conf apt 1.0.9.8.6~tjw.1686529226.0+bootstrap
gpg: directory
'/mnt/mirror/ftp/mirror/tmp/jessie.armel.chroot.BwYA39Xycr/.repo/sim/.gnupg'
created
gpg: keybox
'/mnt/mirror/ftp/mirror/tmp/jessie.armel.chroot.BwYA39Xycr/.repo/sim/.gnupg/pubring.kbx'
created
gpg:
/mnt/mirror/ftp/mirror/tmp/jessie.armel.chroot.BwYA39Xycr/.repo/sim/.gnupg/trustdb.gpg:
trustdb created
gpg: key C1B3F7ABC151840C marked as ultimately trusted
gpg: directory
'/mnt/mirror/ftp/mirror/tmp/jessie.armel.chroot.BwYA39Xycr/.repo/sim/.gnupg/openpgp-revocs.d'
created
gpg: revocation certificate stored as
'/mnt/mirror/ftp/mirror/tmp/jessie.armel.chroot.BwYA39Xycr/.repo/sim/.gnupg/openpgp-revocs.d/95001BDC0F7B2B987FE86FFEC1B3F7ABC151840C.rev'
W: Unable to read directory pool/partial
Phase 1 UNTAR gcc-4.9-base_4.9.2-10+deb8u2_*.deb
Phase 1 UNTAR multiarch-support_2.19-18+deb8u10_*.deb
Phase 1 UNTAR libc6_2.19-18+deb8u10_*.deb
Phase 1 UNTAR libgcc1_1%3a4.9.2-10+deb8u2_*.deb
Phase 1 UNTAR libattr1_1%3a2.4.47-2_*.deb
Phase 1 UNTAR libacl1_2.2.52-2_*.deb
Phase 1 UNTAR libpcre3_2%3a8.35-3.3+deb8u4_*.deb
Phase 1 UNTAR libselinux1_2.3-2_*.deb
Phase 1 UNTAR coreutils_8.23-4_*.deb
Phase 1 UNTAR sensible-utils_0.0.9+deb8u1_*.deb
Phase 1 UNTAR debianutils_4.4+b1~tjw.1686529226.0+bootstrap_*.deb
Phase 1 UNTAR libbz2-1.0_1.0.6-7+deb8u2_*.deb
Phase 1 UNTAR liblzma5_5.1.1alpha+20120614-2+b3_*.deb
Phase 1 UNTAR zlib1g_1%3a1.2.8.dfsg-2+deb8u1_*.deb
Phase 1 UNTAR tar_1.27.1-2+deb8u2_*.deb
Phase 1 UNTAR dpkg_1.17.27_*.deb
Phase 1 UNTAR dash_0.5.7-4+b1~tjw.1686529226.0+bootstrap_*.deb
Phase 1 UNTAR findutils_4.4.2-9+b1_*.deb
Phase 1 UNTAR grep_2.20-4.1_*.deb
Phase 1 UNTAR sed_4.2.2-4+deb8u1_*.deb
Phase 1 UNTAR base-files_8+deb8u11~tjw.1686529226.0+bootstrap_*.deb
Phase 1 UNTAR libdebconfclient0_0.192_*.deb
Phase 1 UNTAR base-passwd_3.5.37_*.deb
Phase 1 UNTAR libc-bin_2.19-18+deb8u10_*.deb
Phase 1 UNTAR bootstrap-essential_1686529226.0+bootstrap_*.deb
/bin/sh: 0: can't access tty; job control turned off
# # # # > > > > > > > > > > Phase 2 Inst gcc-4.9-base_4.9.2-10+deb8u2_*.deb
Selecting previously unselected package gcc-4.9-base:armel.
(Reading database ... 0 files and directories currently installed.)
Preparing to unpack .../gcc-4.9-base_4.9.2-10+deb8u2_armel.deb ...
Unpacking gcc-4.9-base:armel (4.9.2-10+deb8u2) ...
Phase 2 Conf gcc-4.9-base_4.9.2-10+deb8u2_*.deb
Setting up gcc-4.9-base:armel (4.9.2-10+deb8u2) ...
Phase 2 Inst multiarch-support_2.19-18+deb8u10_*.deb
Selecting previously unselected package multiarch-support.
(Reading database ... 14 files and directories currently installed.)
Preparing to unpack .../multiarch-support_2.19-18+deb8u10_armel.deb ...
Unpacking multiarch-support (2.19-18+deb8u10) ...
Phase 2 Inst libc6_2.19-18+deb8u10_*.deb
Selecting previously unselected package libc6:armel.
(Reading database ... 18 files and directories currently installed.)
Preparing to unpack .../libc6_2.19-18+deb8u10_armel.deb ...
Unpacking libc6:armel (2.19-18+deb8u10) ...
Phase 2 Conf libc6:armel_broken_*.deb
dpkg: libc6:armel: dependency problems, but configuring anyway as you requested:
libc6:armel depends on libgcc1; however:
Package libgcc1 is not installed.
Setting up libc6:armel (2.19-18+deb8u10) ...
Phase 2 Conf multiarch-support_2.19-18+deb8u10_*.deb
Setting up multiarch-support (2.19-18+deb8u10) ...
Phase 2 Inst libgcc1_1%3a4.9.2-10+deb8u2_*.deb
Selecting previously unselected package libgcc1:armel.
(Reading database ... 338 files and directories currently installed.)
Preparing to unpack .../libgcc1_1%3a4.9.2-10+deb8u2_armel.deb ...
Unpacking libgcc1:armel (1:4.9.2-10+deb8u2) ...
Phase 2 Conf libgcc1_1%3a4.9.2-10+deb8u2_*.deb
Setting up libgcc1:armel (1:4.9.2-10+deb8u2) ...
Phase 2 Inst libattr1_1%3a2.4.47-2_*.deb
Selecting previously unselected package libattr1:armel.
(Reading database ... 341 files and directories currently installed.)
Preparing to unpack .../libattr1_1%3a2.4.47-2_armel.deb ...
Unpacking libattr1:armel (1:2.4.47-2) ...
Phase 2 Conf libattr1_1%3a2.4.47-2_*.deb
Setting up libattr1:armel (1:2.4.47-2) ...
Phase 2 Inst libacl1_2.2.52-2_*.deb
Selecting previously unselected package libacl1:armel.
(Reading database ... 347 files and directories currently installed.)
Preparing to unpack .../libacl1_2.2.52-2_armel.deb ...
Unpacking libacl1:armel (2.2.52-2) ...
Phase 2 Conf libacl1_2.2.52-2_*.deb
Setting up libacl1:armel (2.2.52-2) ...
Phase 2 Inst libpcre3_2%3a8.35-3.3+deb8u4_*.deb
Selecting previously unselected package libpcre3:armel.
(Reading database ... 353 files and directories currently installed.)
Preparing to unpack .../libpcre3_2%3a8.35-3.3+deb8u4_armel.deb ...
Unpacking libpcre3:armel (2:8.35-3.3+deb8u4) ...
Phase 2 Conf libpcre3_2%3a8.35-3.3+deb8u4_*.deb
Setting up libpcre3:armel (2:8.35-3.3+deb8u4) ...
Phase 2 Inst libselinux1_2.3-2_*.deb
Selecting previously unselected package libselinux1:armel.
(Reading database ... 370 files and directories currently installed.)
Preparing to unpack .../libselinux1_2.3-2_armel.deb ...
Unpacking libselinux1:armel (2.3-2) ...
Phase 2 Conf libselinux1_2.3-2_*.deb
Setting up libselinux1:armel (2.3-2) ...
Phase 2 Inst coreutils_8.23-4_*.deb
Selecting previously unselected package coreutils.
(Reading database ... 375 files and directories currently installed.)
Preparing to unpack .../coreutils_8.23-4_armel.deb ...
Unpacking coreutils (8.23-4) ...
Phase 2 Conf coreutils_8.23-4_*.deb
Setting up coreutils (8.23-4) ...
Phase 2 Inst sensible-utils_0.0.9+deb8u1_*.deb
Selecting previously unselected package sensible-utils.
(Reading database ... 728 files and directories currently installed.)
Preparing to unpack .../sensible-utils_0.0.9+deb8u1_all.deb ...
Unpacking sensible-utils (0.0.9+deb8u1) ...
Phase 2 Conf sensible-utils_0.0.9+deb8u1_*.deb
Setting up sensible-utils (0.0.9+deb8u1) ...
Phase 2 Inst debianutils_4.4+b1~tjw.1686529226.0+bootstrap_*.deb
Selecting previously unselected package debianutils.
(Reading database ... 772 files and directories currently installed.)
Preparing to unpack .../debianutils_4.4+b1~tjw.1686529226.0+bootstrap_armel.deb
...
Unpacking debianutils (4.4+b1~tjw.1686529226.0+bootstrap) ...
Phase 2 Conf debianutils_4.4+b1~tjw.1686529226.0+bootstrap_*.deb
Setting up debianutils (4.4+b1~tjw.1686529226.0+bootstrap) ...
Phase 2 Inst libbz2-1.0_1.0.6-7+deb8u2_*.deb
Selecting previously unselected package libbz2-1.0:armel.
(Reading database ... 854 files and directories currently installed.)
Preparing to unpack .../libbz2-1.0_1.0.6-7+deb8u2_armel.deb ...
Unpacking libbz2-1.0:armel (1.0.6-7+deb8u2) ...
Phase 2 Conf libbz2-1.0_1.0.6-7+deb8u2_*.deb
Setting up libbz2-1.0:armel (1.0.6-7+deb8u2) ...
Phase 2 Inst liblzma5_5.1.1alpha+20120614-2+b3_*.deb
Selecting previously unselected package liblzma5:armel.
(Reading database ... 861 files and directories currently installed.)
Preparing to unpack .../liblzma5_5.1.1alpha+20120614-2+b3_armel.deb ...
Unpacking liblzma5:armel (5.1.1alpha+20120614-2+b3) ...
Phase 2 Conf liblzma5_5.1.1alpha+20120614-2+b3_*.deb
Setting up liblzma5:armel (5.1.1alpha+20120614-2+b3) ...
Phase 2 Inst zlib1g_1%3a1.2.8.dfsg-2+deb8u1_*.deb
Selecting previously unselected package zlib1g:armel.
(Reading database ... 871 files and directories currently installed.)
Preparing to unpack .../zlib1g_1%3a1.2.8.dfsg-2+deb8u1_armel.deb ...
Unpacking zlib1g:armel (1:1.2.8.dfsg-2+deb8u1) ...
Phase 2 Conf zlib1g_1%3a1.2.8.dfsg-2+deb8u1_*.deb
Setting up zlib1g:armel (1:1.2.8.dfsg-2+deb8u1) ...
Phase 2 Inst tar_1.27.1-2+deb8u2_*.deb
Selecting previously unselected package tar.
(Reading database ... 877 files and directories currently installed.)
Preparing to unpack .../tar_1.27.1-2+deb8u2_armel.deb ...
Unpacking tar (1.27.1-2+deb8u2) ...
Phase 2 Conf tar_1.27.1-2+deb8u2_*.deb
Setting up tar (1.27.1-2+deb8u2) ...
update-alternatives: using /usr/sbin/rmt-tar to provide /usr/sbin/rmt (rmt) in
auto mode
Phase 2 Inst dpkg_1.17.27_*.deb
Selecting previously unselected package dpkg.
(Reading database ... 935 files and directories currently installed.)
Preparing to unpack .../pool/dpkg_1.17.27_armel.deb ...
Unpacking dpkg (1.17.27) ...
Phase 2 Conf dpkg_1.17.27_*.deb
Setting up dpkg (1.17.27) ...
Phase 2 Inst dash_0.5.7-4+b1~tjw.1686529226.0+bootstrap_*.deb
Selecting previously unselected package dash.
(Reading database ... 1132 files and directories currently installed.)
Preparing to unpack .../dash_0.5.7-4+b1~tjw.1686529226.0+bootstrap_armel.deb ...
Adding 'diversion of /bin/sh to /bin/sh.distrib by dash'
Adding 'diversion of /usr/share/man/man1/sh.1.gz to
/usr/share/man/man1/sh.distrib.1.gz by dash'
Unpacking dash (0.5.7-4+b1~tjw.1686529226.0+bootstrap) ...
Phase 2 Conf dash_0.5.7-4+b1~tjw.1686529226.0+bootstrap_*.deb
Setting up dash (0.5.7-4+b1~tjw.1686529226.0+bootstrap) ...
Phase 2 Inst findutils_4.4.2-9+b1_*.deb
Selecting previously unselected package findutils.
(Reading database ... 1147 files and directories currently installed.)
Preparing to unpack .../findutils_4.4.2-9+b1_armel.deb ...
Unpacking findutils (4.4.2-9+b1) ...
Phase 2 Conf findutils_4.4.2-9+b1_*.deb
Setting up findutils (4.4.2-9+b1) ...
Phase 2 Inst grep_2.20-4.1_*.deb
Selecting previously unselected package grep.
(Reading database ... 1208 files and directories currently installed.)
Preparing to unpack .../pool/grep_2.20-4.1_armel.deb ...
Unpacking grep (2.20-4.1) ...
Phase 2 Conf grep_2.20-4.1_*.deb
Setting up grep (2.20-4.1) ...
Phase 2 Inst sed_4.2.2-4+deb8u1_*.deb
Selecting previously unselected package sed.
(Reading database ... 1271 files and directories currently installed.)
Preparing to unpack .../sed_4.2.2-4+deb8u1_armel.deb ...
Unpacking sed (4.2.2-4+deb8u1) ...
Phase 2 Conf sed_4.2.2-4+deb8u1_*.deb
Setting up sed (4.2.2-4+deb8u1) ...
Phase 2 Inst base-files_8+deb8u11~tjw.1686529226.0+bootstrap_*.deb
Selecting previously unselected package base-files.
(Reading database ... 1324 files and directories currently installed.)
Preparing to unpack
.../base-files_8+deb8u11~tjw.1686529226.0+bootstrap_armel.deb ...
Unpacking base-files (8+deb8u11~tjw.1686529226.0+bootstrap) ...
Phase 2 Conf base-files_8+deb8u11~tjw.1686529226.0+bootstrap_*.deb
Setting up base-files (8+deb8u11~tjw.1686529226.0+bootstrap) ...
Phase 2 Inst libdebconfclient0_0.192_*.deb
Selecting previously unselected package libdebconfclient0:armel.
(Reading database ... 1389 files and directories currently installed.)
Preparing to unpack .../libdebconfclient0_0.192_armel.deb ...
Unpacking libdebconfclient0:armel (0.192) ...
Phase 2 Conf libdebconfclient0_0.192_*.deb
Setting up libdebconfclient0:armel (0.192) ...
Phase 2 Inst base-passwd_3.5.37_*.deb
Selecting previously unselected package base-passwd.
(Reading database ... 1394 files and directories currently installed.)
Preparing to unpack .../base-passwd_3.5.37_armel.deb ...
Unpacking base-passwd (3.5.37) ...
Phase 2 Conf base-passwd_3.5.37_*.deb
Setting up base-passwd (3.5.37) ...
Phase 2 Inst libc-bin_2.19-18+deb8u10_*.deb
Selecting previously unselected package libc-bin.
(Reading database ... 1415 files and directories currently installed.)
Preparing to unpack .../libc-bin_2.19-18+deb8u10_armel.deb ...
Unpacking libc-bin (2.19-18+deb8u10) ...
Phase 2 Conf libc-bin_2.19-18+deb8u10_*.deb
Setting up libc-bin (2.19-18+deb8u10) ...
Phase 2 Inst bootstrap-essential_1686529226.0+bootstrap_*.deb
Selecting previously unselected package bootstrap-essential.
(Reading database ... 1460 files and directories currently installed.)
Preparing to unpack .../bootstrap-essential_1686529226.0+bootstrap_armel.deb ...
Unpacking bootstrap-essential (1686529226.0+bootstrap) ...
Phase 2 Conf bootstrap-essential_1686529226.0+bootstrap_*.deb
Setting up bootstrap-essential (1686529226.0+bootstrap) ...
# # # > > > > > > > > > > Phase 3 Inst libstdc++6_4.9.2-10+deb8u2_*.deb
Selecting previously unselected package libstdc++6:armel.
(Reading database ... 1460 files and directories currently installed.)
Preparing to unpack .../libstdc++6_4.9.2-10+deb8u2_armel.deb ...
Unpacking libstdc++6:armel (4.9.2-10+deb8u2) ...
Phase 3 Conf libstdc++6_4.9.2-10+deb8u2_*.deb
Setting up libstdc++6:armel (4.9.2-10+deb8u2) ...
Processing triggers for libc-bin (2.19-18+deb8u10) ...
Phase 3 Inst libapt-pkg4.12_1.0.9.8.6_*.deb
Selecting previously unselected package libapt-pkg4.12:armel.
(Reading database ... 1476 files and directories currently installed.)
Preparing to unpack .../libapt-pkg4.12_1.0.9.8.6_armel.deb ...
Unpacking libapt-pkg4.12:armel (1.0.9.8.6) ...
Phase 3 Conf libapt-pkg4.12_1.0.9.8.6_*.deb
Setting up libapt-pkg4.12:armel (1.0.9.8.6) ...
Processing triggers for libc-bin (2.19-18+deb8u10) ...
Phase 3 Inst gpgv_1.4.18-7+deb8u5_*.deb
Selecting previously unselected package gpgv.
(Reading database ... 1529 files and directories currently installed.)
Preparing to unpack .../gpgv_1.4.18-7+deb8u5_armel.deb ...
Unpacking gpgv (1.4.18-7+deb8u5) ...
Phase 3 Conf gpgv_1.4.18-7+deb8u5_*.deb
Setting up gpgv (1.4.18-7+deb8u5) ...
Phase 3 Inst debian-archive-keyring_2017.5~deb8u1_*.deb
Selecting previously unselected package debian-archive-keyring.
(Reading database ... 1535 files and directories currently installed.)
Preparing to unpack .../debian-archive-keyring_2017.5~deb8u1_all.deb ...
Unpacking debian-archive-keyring (2017.5~deb8u1) ...
Phase 3 Conf debian-archive-keyring_2017.5~deb8u1_*.deb
Setting up debian-archive-keyring (2017.5~deb8u1) ...
Phase 3 Inst readline-common_6.3-8_*.deb
Selecting previously unselected package readline-common.
(Reading database ... 1552 files and directories currently installed.)
Preparing to unpack .../readline-common_6.3-8_all.deb ...
Unpacking readline-common (6.3-8) ...
Phase 3 Conf readline-common_6.3-8_*.deb
Setting up readline-common (6.3-8) ...
Phase 3 Inst libtinfo5_5.9+20140913-1+deb8u3_*.deb
Selecting previously unselected package libtinfo5:armel.
(Reading database ... 1562 files and directories currently installed.)
Preparing to unpack .../libtinfo5_5.9+20140913-1+deb8u3_armel.deb ...
Unpacking libtinfo5:armel (5.9+20140913-1+deb8u3) ...
Phase 3 Conf libtinfo5_5.9+20140913-1+deb8u3_*.deb
Setting up libtinfo5:armel (5.9+20140913-1+deb8u3) ...
Processing triggers for libc-bin (2.19-18+deb8u10) ...
Phase 3 Inst libreadline6_6.3-8+b3_*.deb
Selecting previously unselected package libreadline6:armel.
(Reading database ... 1571 files and directories currently installed.)
Preparing to unpack .../libreadline6_6.3-8+b3_armel.deb ...
Unpacking libreadline6:armel (6.3-8+b3) ...
Phase 3 Conf libreadline6_6.3-8+b3_*.deb
Setting up libreadline6:armel (6.3-8+b3) ...
Processing triggers for libc-bin (2.19-18+deb8u10) ...
Phase 3 Inst libusb-0.1-4_2%3a0.1.12-25_*.deb
Selecting previously unselected package libusb-0.1-4:armel.
(Reading database ... 1585 files and directories currently installed.)
Preparing to unpack .../libusb-0.1-4_2%3a0.1.12-25_armel.deb ...
Unpacking libusb-0.1-4:armel (2:0.1.12-25) ...
Phase 3 Conf libusb-0.1-4_2%3a0.1.12-25_*.deb
Setting up libusb-0.1-4:armel (2:0.1.12-25) ...
Processing triggers for libc-bin (2.19-18+deb8u10) ...
Phase 3 Inst gnupg_1.4.18-7+deb8u5_*.deb
Selecting previously unselected package gnupg.
(Reading database ... 1593 files and directories currently installed.)
Preparing to unpack .../gnupg_1.4.18-7+deb8u5_armel.deb ...
Unpacking gnupg (1.4.18-7+deb8u5) ...
Phase 3 Conf gnupg_1.4.18-7+deb8u5_*.deb
Setting up gnupg (1.4.18-7+deb8u5) ...
Phase 3 Inst mawk_1.3.3-17_*.deb
Selecting previously unselected package mawk.
(Reading database ... 1671 files and directories currently installed.)
Preparing to unpack .../pool/mawk_1.3.3-17_armel.deb ...
Unpacking mawk (1.3.3-17) ...
Phase 3 Conf mawk_1.3.3-17_*.deb
Setting up mawk (1.3.3-17) ...
Phase 3 Inst apt_1.0.9.8.6~tjw.1686529226.0+bootstrap_*.deb
Selecting previously unselected package apt.
(Reading database ... 1690 files and directories currently installed.)
Preparing to unpack .../apt_1.0.9.8.6~tjw.1686529226.0+bootstrap_armel.deb ...
Unpacking apt (1.0.9.8.6~tjw.1686529226.0+bootstrap) ...
Phase 3 Conf apt_1.0.9.8.6~tjw.1686529226.0+bootstrap_*.deb
Setting up apt (1.0.9.8.6~tjw.1686529226.0+bootstrap) ...
Processing triggers for libc-bin (2.19-18+deb8u10) ...
# # # # > > > > > > > > > > > > > # # # # # Get:1 file: jessie InRelease [2375
B]
Ign file: jessie/main Translation-en
Reading package lists...
# Reading package lists...
Building dependency tree...
The following extra packages will be installed:
bash bsdutils debconf debconf-i18n diffutils e2fslibs e2fsprogs gcc-4.8-base
gzip hostname init init-system-helpers initscripts insserv libaudit-common
libaudit1 libblkid1 libcomerr2 libdb5.3 libgcrypt20 libgpg-error0
liblocale-gettext-perl libmount1 libncurses5 libpam-modules
libpam-modules-bin libpam-runtime libpam0g libsemanage-common libsemanage1
libsepol1 libslang2 libsmartcols1 libss2 libsystemd0 libtext-charwidth-perl
libtext-iconv-perl libtext-wrapi18n-perl libustr-1.0-1 libuuid1 login
lsb-base mount ncurses-base ncurses-bin passwd perl-base startpar sysv-rc
sysvinit-core sysvinit-utils tzdata util-linux
Suggested packages:
bash-doc debconf-doc debconf-utils whiptail dialog gnome-utils
libterm-readline-gnu-perl libgtk2-perl libnet-ldap-perl libqtgui4-perl
libqtcore4-perl diffutils-doc wdiff gpart parted e2fsck-static less
bootchart2 rng-tools libpam-doc nfs-common bum bootlogd sash dosfstools kbd
console-tools util-linux-locales
Recommended packages:
bash-completion bsdmainutils apt-utils psmisc libgpm2 libpng12-0
uuid-runtime
The following NEW packages will be installed:
bash bootstrap-required bsdutils debconf debconf-i18n diffutils e2fslibs
e2fsprogs gcc-4.8-base gzip hostname init init-system-helpers initscripts
insserv libaudit-common libaudit1 libblkid1 libcomerr2 libdb5.3 libgcrypt20
libgpg-error0 liblocale-gettext-perl libmount1 libncurses5 libpam-modules
libpam-modules-bin libpam-runtime libpam0g libsemanage-common libsemanage1
libsepol1 libslang2 libsmartcols1 libss2 libsystemd0 libtext-charwidth-perl
libtext-iconv-perl libtext-wrapi18n-perl libustr-1.0-1 libuuid1 login
lsb-base mount ncurses-base ncurses-bin passwd perl-base startpar sysv-rc
sysvinit-core sysvinit-utils tzdata util-linux
0 upgraded, 54 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/11.3 MB of archives.
After this operation, 37.5 MB of additional disk space will be used.
E: Can not write log (Is /dev/pts mounted?) - posix_openpt (2: No such file or
directory)
Selecting previously unselected package libncurses5:armel.
(Reading database ... 1886 files and directories currently installed.)
Preparing to unpack .../libncurses5_5.9+20140913-1+deb8u3_armel.deb ...
Unpacking libncurses5:armel (5.9+20140913-1+deb8u3) ...
Setting up libncurses5:armel (5.9+20140913-1+deb8u3) ...
Processing triggers for libc-bin (2.19-18+deb8u10) ...
Selecting previously unselected package bash.
(Reading database ... 1895 files and directories currently installed.)
Preparing to unpack .../bash_4.3-11+deb8u2_armel.deb ...
Unpacking bash (4.3-11+deb8u2) ...
Setting up bash (4.3-11+deb8u2) ...
update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide
/usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode
Selecting previously unselected package libgpg-error0:armel.
(Reading database ... 1960 files and directories currently installed.)
Preparing to unpack .../libgpg-error0_1.17-3_armel.deb ...
Unpacking libgpg-error0:armel (1.17-3) ...
Setting up libgpg-error0:armel (1.17-3) ...
Processing triggers for libc-bin (2.19-18+deb8u10) ...
Selecting previously unselected package libgcrypt20:armel.
(Reading database ... 1985 files and directories currently installed.)
Preparing to unpack .../libgcrypt20_1.6.3-2+deb8u8_armel.deb ...
Unpacking libgcrypt20:armel (1.6.3-2+deb8u8) ...
Setting up libgcrypt20:armel (1.6.3-2+deb8u8) ...
Processing triggers for libc-bin (2.19-18+deb8u10) ...
Selecting previously unselected package libsystemd0:armel.
(Reading database ... 1995 files and directories currently installed.)
Preparing to unpack .../libsystemd0_215-17+deb8u13_armel.deb ...
Unpacking libsystemd0:armel (215-17+deb8u13) ...
Setting up libsystemd0:armel (215-17+deb8u13) ...
Processing triggers for libc-bin (2.19-18+deb8u10) ...
Selecting previously unselected package bsdutils.
(Reading database ... 2000 files and directories currently installed.)
Preparing to unpack .../bsdutils_1%3a2.25.2-6_armel.deb ...
Unpacking bsdutils (1:2.25.2-6) ...
Setting up bsdutils (1:2.25.2-6) ...
Selecting previously unselected package diffutils.
(Reading database ... 2022 files and directories currently installed.)
Preparing to unpack .../diffutils_1%3a3.3-1+b1_armel.deb ...
Unpacking diffutils (1:3.3-1+b1) ...
Setting up diffutils (1:3.3-1+b1) ...
Selecting previously unselected package e2fslibs:armel.
(Reading database ... 2070 files and directories currently installed.)
Preparing to unpack .../e2fslibs_1.42.12-2+deb8u2_armel.deb ...
Unpacking e2fslibs:armel (1.42.12-2+deb8u2) ...
Setting up e2fslibs:armel (1.42.12-2+deb8u2) ...
Processing triggers for libc-bin (2.19-18+deb8u10) ...
Selecting previously unselected package libaudit-common.
(Reading database ... 2077 files and directories currently installed.)
Preparing to unpack .../libaudit-common_1%3a2.4-1_all.deb ...
Unpacking libaudit-common (1:2.4-1) ...
Setting up libaudit-common (1:2.4-1) ...
Selecting previously unselected package libaudit1:armel.
(Reading database ... 2083 files and directories currently installed.)
Preparing to unpack .../libaudit1_1%3a2.4-1+b1_armel.deb ...
Unpacking libaudit1:armel (1:2.4-1+b1) ...
Setting up libaudit1:armel (1:2.4-1+b1) ...
Processing triggers for libc-bin (2.19-18+deb8u10) ...
Selecting previously unselected package perl-base.
(Reading database ... 2090 files and directories currently installed.)
Preparing to unpack .../perl-base_5.20.2-3+deb8u12_armel.deb ...
Unpacking perl-base (5.20.2-3+deb8u12) ...
Setting up perl-base (5.20.2-3+deb8u12) ...
Selecting previously unselected package debconf.
(Reading database ... 2665 files and directories currently installed.)
Preparing to unpack .../debconf_1.5.56+deb8u1_all.deb ...
Unpacking debconf (1.5.56+deb8u1) ...
Setting up debconf (1.5.56+deb8u1) ...
Selecting previously unselected package libpam0g:armel.
(Reading database ... 2841 files and directories currently installed.)
Preparing to unpack .../libpam0g_1.1.8-3.1+deb8u2+b1_armel.deb ...
Unpacking libpam0g:armel (1.1.8-3.1+deb8u2+b1) ...
Setting up libpam0g:armel (1.1.8-3.1+deb8u2+b1) ...
Processing triggers for libc-bin (2.19-18+deb8u10) ...
Selecting previously unselected package libsemanage-common.
(Reading database ... 2858 files and directories currently installed.)
Preparing to unpack .../libsemanage-common_2.3-1_all.deb ...
Unpacking libsemanage-common (2.3-1) ...
Setting up libsemanage-common (2.3-1) ...
Selecting previously unselected package libsepol1:armel.
(Reading database ... 2865 files and directories currently installed.)
Preparing to unpack .../pool/libsepol1_2.3-2_armel.deb ...
Unpacking libsepol1:armel (2.3-2) ...
Setting up libsepol1:armel (2.3-2) ...
Processing triggers for libc-bin (2.19-18+deb8u10) ...
Selecting previously unselected package libustr-1.0-1:armel.
(Reading database ... 2870 files and directories currently installed.)
Preparing to unpack .../libustr-1.0-1_1.0.4-3+b2_armel.deb ...
Unpacking libustr-1.0-1:armel (1.0.4-3+b2) ...
Setting up libustr-1.0-1:armel (1.0.4-3+b2) ...
Processing triggers for libc-bin (2.19-18+deb8u10) ...
Selecting previously unselected package libsemanage1:armel.
(Reading database ... 2882 files and directories currently installed.)
Preparing to unpack .../libsemanage1_2.3-1+b1_armel.deb ...
Unpacking libsemanage1:armel (2.3-1+b1) ...
Setting up libsemanage1:armel (2.3-1+b1) ...
Processing triggers for libc-bin (2.19-18+deb8u10) ...
Selecting previously unselected package libdb5.3:armel.
(Reading database ... 2888 files and directories currently installed.)
Preparing to unpack .../libdb5.3_5.3.28-9+deb8u1_armel.deb ...
Unpacking libdb5.3:armel (5.3.28-9+deb8u1) ...
Setting up libdb5.3:armel (5.3.28-9+deb8u1) ...
Processing triggers for libc-bin (2.19-18+deb8u10) ...
Selecting previously unselected package libpam-modules-bin.
(Reading database ... 2894 files and directories currently installed.)
Preparing to unpack .../libpam-modules-bin_1.1.8-3.1+deb8u2+b1_armel.deb ...
Unpacking libpam-modules-bin (1.1.8-3.1+deb8u2+b1) ...
Setting up libpam-modules-bin (1.1.8-3.1+deb8u2+b1) ...
Selecting previously unselected package libpam-modules:armel.
(Reading database ... 2911 files and directories currently installed.)
Preparing to unpack .../libpam-modules_1.1.8-3.1+deb8u2+b1_armel.deb ...
Unpacking libpam-modules:armel (1.1.8-3.1+deb8u2+b1) ...
Setting up libpam-modules:armel (1.1.8-3.1+deb8u2+b1) ...
Selecting previously unselected package libpam-runtime.
(Reading database ... 3024 files and directories currently installed.)
Preparing to unpack .../libpam-runtime_1.1.8-3.1+deb8u2_all.deb ...
Unpacking libpam-runtime (1.1.8-3.1+deb8u2) ...
Setting up libpam-runtime (1.1.8-3.1+deb8u2) ...
Selecting previously unselected package login.
(Reading database ... 3176 files and directories currently installed.)
Preparing to unpack .../login_1%3a4.2-3+deb8u4_armel.deb ...
Unpacking login (1:4.2-3+deb8u4) ...
Setting up login (1:4.2-3+deb8u4) ...
Selecting previously unselected package passwd.
(Reading database ... 3353 files and directories currently installed.)
Preparing to unpack
.../passwd_1%3a4.2-3+deb8u4~tjw.1686529226.0+bootstrap_armel.deb ...
Unpacking passwd (1:4.2-3+deb8u4~tjw.1686529226.0+bootstrap) ...
Setting up passwd (1:4.2-3+deb8u4~tjw.1686529226.0+bootstrap) ...
Shadow passwords are now on.
Selecting previously unselected package libuuid1:armel.
(Reading database ... 3674 files and directories currently installed.)
Preparing to unpack .../libuuid1_2.25.2-6_armel.deb ...
Unpacking libuuid1:armel (2.25.2-6) ...
Setting up libuuid1:armel (2.25.2-6) ...
Processing triggers for libc-bin (2.19-18+deb8u10) ...
Selecting previously unselected package libblkid1:armel.
(Reading database ... 3680 files and directories currently installed.)
Preparing to unpack .../libblkid1_2.25.2-6_armel.deb ...
Unpacking libblkid1:armel (2.25.2-6) ...
Setting up libblkid1:armel (2.25.2-6) ...
Processing triggers for libc-bin (2.19-18+deb8u10) ...
Selecting previously unselected package libcomerr2:armel.
(Reading database ... 3686 files and directories currently installed.)
Preparing to unpack .../libcomerr2_1.42.12-2+deb8u2_armel.deb ...
Unpacking libcomerr2:armel (1.42.12-2+deb8u2) ...
Setting up libcomerr2:armel (1.42.12-2+deb8u2) ...
Processing triggers for libc-bin (2.19-18+deb8u10) ...
Selecting previously unselected package libss2:armel.
(Reading database ... 3691 files and directories currently installed.)
Preparing to unpack .../libss2_1.42.12-2+deb8u2_armel.deb ...
Unpacking libss2:armel (1.42.12-2+deb8u2) ...
Setting up libss2:armel (1.42.12-2+deb8u2) ...
Processing triggers for libc-bin (2.19-18+deb8u10) ...
Selecting previously unselected package lsb-base.
(Reading database ... 3696 files and directories currently installed.)
Preparing to unpack .../lsb-base_4.1+Debian13+nmu1_all.deb ...
Unpacking lsb-base (4.1+Debian13+nmu1) ...
Setting up lsb-base (4.1+Debian13+nmu1) ...
Selecting previously unselected package startpar.
(Reading database ... 3705 files and directories currently installed.)
Preparing to unpack .../pool/startpar_0.59-3_armel.deb ...
Unpacking startpar (0.59-3) ...
Setting up startpar (0.59-3) ...
Selecting previously unselected package sysvinit-utils.
(Reading database ... 3715 files and directories currently installed.)
Preparing to unpack .../sysvinit-utils_2.88dsf-59_armel.deb ...
Unpacking sysvinit-utils (2.88dsf-59) ...
Setting up sysvinit-utils (2.88dsf-59) ...
Selecting previously unselected package insserv.
(Reading database ... 3739 files and directories currently installed.)
Preparing to unpack .../insserv_1.14.0-5_armel.deb ...
Unpacking insserv (1.14.0-5) ...
Setting up insserv (1.14.0-5) ...
Selecting previously unselected package sysv-rc.
(Reading database ... 3758 files and directories currently installed.)
Preparing to unpack .../sysv-rc_2.88dsf-59_all.deb ...
Unpacking sysv-rc (2.88dsf-59) ...
Setting up sysv-rc (2.88dsf-59) ...
Selecting previously unselected package initscripts.
(Reading database ... 3795 files and directories currently installed.)
Preparing to unpack .../initscripts_2.88dsf-59_armel.deb ...
Unpacking initscripts (2.88dsf-59) ...
Setting up initscripts (2.88dsf-59) ...
/usr/sbin/invoke-rc.d: 1: /usr/sbin/invoke-rc.d: /sbin/runlevel: not found
Selecting previously unselected package tzdata.
(Reading database ... 3849 files and directories currently installed.)
Preparing to unpack .../tzdata_2019c-0+deb8u1_all.deb ...
Unpacking tzdata (2019c-0+deb8u1) ...
Setting up tzdata (2019c-0+deb8u1) ...
Current default time zone: 'Etc/UTC'
Local time is now: Mon Jun 12 08:18:19 UTC 2023.
Universal Time is now: Mon Jun 12 08:18:19 UTC 2023.
Run 'dpkg-reconfigure tzdata' if you wish to change it.
Selecting previously unselected package init-system-helpers.
(Reading database ... 5746 files and directories currently installed.)
Preparing to unpack .../init-system-helpers_1.22_all.deb ...
Unpacking init-system-helpers (1.22) ...
Setting up init-system-helpers (1.22) ...
Selecting previously unselected package libmount1:armel.
(Reading database ... 5757 files and directories currently installed.)
Preparing to unpack .../libmount1_2.25.2-6_armel.deb ...
Unpacking libmount1:armel (2.25.2-6) ...
Setting up libmount1:armel (2.25.2-6) ...
Processing triggers for libc-bin (2.19-18+deb8u10) ...
Selecting previously unselected package libslang2:armel.
(Reading database ... 5763 files and directories currently installed.)
Preparing to unpack .../libslang2_2.3.0-2_armel.deb ...
Unpacking libslang2:armel (2.3.0-2) ...
Setting up libslang2:armel (2.3.0-2) ...
Processing triggers for libc-bin (2.19-18+deb8u10) ...
Selecting previously unselected package libsmartcols1:armel.
(Reading database ... 5773 files and directories currently installed.)
Preparing to unpack .../libsmartcols1_2.25.2-6_armel.deb ...
Unpacking libsmartcols1:armel (2.25.2-6) ...
Setting up libsmartcols1:armel (2.25.2-6) ...
Processing triggers for libc-bin (2.19-18+deb8u10) ...
Selecting previously unselected package util-linux.
(Reading database ... 5779 files and directories currently installed.)
Preparing to unpack
.../util-linux_2.25.2-6~tjw.1686529226.0+bootstrap_armel.deb ...
Unpacking util-linux (2.25.2-6~tjw.1686529226.0+bootstrap) ...
Setting up util-linux (2.25.2-6~tjw.1686529226.0+bootstrap) ...
update-alternatives: using /bin/more to provide /usr/bin/pager (pager) in auto
mode
Selecting previously unselected package e2fsprogs.
(Reading database ... 6044 files and directories currently installed.)
Preparing to unpack .../e2fsprogs_1.42.12-2+deb8u2_armel.deb ...
Unpacking e2fsprogs (1.42.12-2+deb8u2) ...
Setting up e2fsprogs (1.42.12-2+deb8u2) ...
Selecting previously unselected package gzip.
(Reading database ... 6120 files and directories currently installed.)
Preparing to unpack .../pool/gzip_1.6-4_armel.deb ...
Unpacking gzip (1.6-4) ...
Setting up gzip (1.6-4) ...
Selecting previously unselected package hostname.
(Reading database ... 6156 files and directories currently installed.)
Preparing to unpack .../pool/hostname_3.15_armel.deb ...
Unpacking hostname (3.15) ...
Setting up hostname (3.15) ...
Selecting previously unselected package sysvinit-core.
(Reading database ... 6169 files and directories currently installed.)
Preparing to unpack .../sysvinit-core_2.88dsf-59_armel.deb ...
Unpacking sysvinit-core (2.88dsf-59) ...
Setting up sysvinit-core (2.88dsf-59) ...
Not restarting sysvinit
Selecting previously unselected package init.
(Reading database ... 6194 files and directories currently installed.)
Preparing to unpack .../.repo/pool/init_1.22_armel.deb ...
Unpacking init (1.22) ...
Setting up init (1.22) ...
Selecting previously unselected package mount.
(Reading database ... 6197 files and directories currently installed.)
Preparing to unpack .../pool/mount_2.25.2-6_armel.deb ...
Unpacking mount (2.25.2-6) ...
Setting up mount (2.25.2-6) ...
Selecting previously unselected package ncurses-bin.
(Reading database ... 6223 files and directories currently installed.)
Preparing to unpack .../ncurses-bin_5.9+20140913-1+deb8u3_armel.deb ...
Unpacking ncurses-bin (5.9+20140913-1+deb8u3) ...
Setting up ncurses-bin (5.9+20140913-1+deb8u3) ...
Selecting previously unselected package ncurses-base.
(Reading database ... 6255 files and directories currently installed.)
Preparing to unpack .../ncurses-base_5.9+20140913-1+deb8u3_all.deb ...
Unpacking ncurses-base (5.9+20140913-1+deb8u3) ...
Setting up ncurses-base (5.9+20140913-1+deb8u3) ...
Selecting previously unselected package liblocale-gettext-perl.
(Reading database ... 6322 files and directories currently installed.)
Preparing to unpack .../liblocale-gettext-perl_1.05-8+b1_armel.deb ...
Unpacking liblocale-gettext-perl (1.05-8+b1) ...
Selecting previously unselected package libtext-iconv-perl.
Preparing to unpack .../libtext-iconv-perl_1.7-5+b2_armel.deb ...
Unpacking libtext-iconv-perl (1.7-5+b2) ...
Selecting previously unselected package libtext-charwidth-perl.
Preparing to unpack .../libtext-charwidth-perl_0.04-7+b3_armel.deb ...
Unpacking libtext-charwidth-perl (0.04-7+b3) ...
Selecting previously unselected package libtext-wrapi18n-perl.
Preparing to unpack .../libtext-wrapi18n-perl_0.06-7_all.deb ...
Unpacking libtext-wrapi18n-perl (0.06-7) ...
Selecting previously unselected package debconf-i18n.
Preparing to unpack .../debconf-i18n_1.5.56+deb8u1_all.deb ...
Unpacking debconf-i18n (1.5.56+deb8u1) ...
Selecting previously unselected package gcc-4.8-base:armel.
Preparing to unpack .../gcc-4.8-base_4.8.4-1_armel.deb ...
Unpacking gcc-4.8-base:armel (4.8.4-1) ...
Selecting previously unselected package bootstrap-required.
Preparing to unpack .../bootstrap-required_1686529226.0+bootstrap_armel.deb ...
Unpacking bootstrap-required (1686529226.0+bootstrap) ...
Setting up liblocale-gettext-perl (1.05-8+b1) ...
Setting up libtext-iconv-perl (1.7-5+b2) ...
Setting up libtext-charwidth-perl (0.04-7+b3) ...
Setting up libtext-wrapi18n-perl (0.06-7) ...
Setting up debconf-i18n (1.5.56+deb8u1) ...
Setting up gcc-4.8-base:armel (4.8.4-1) ...
Setting up bootstrap-required (1686529226.0+bootstrap) ...
# Reading package lists...
Building dependency tree...
Reading state information...
The following packages will be REMOVED:
bootstrap-essential* bootstrap-required*
0 upgraded, 0 newly installed, 2 to remove and 0 not upgraded.
After this operation, 18.4 kB disk space will be freed.
E: Can not write log (Is /dev/pts mounted?) - posix_openpt (2: No such file or
directory)
(Reading database ... 6472 files and directories currently installed.)
Removing bootstrap-essential (1686529226.0+bootstrap) ...
Removing bootstrap-required (1686529226.0+bootstrap) ...
# # # # > > > > > # # # # # # # # # # # #
