On 1/16/24 17:08, gene heskett wrote:
> lsblk, which I've published several times, shows 5 drives. by-id listing
> only shows 3. The drive I've been trying to use bounces from /dev/sdd to
> sde to sdh dependin on which controller it is curently plugged into.
>
> And I've since tried cp in addition to rsync, does the same thing,
> killing the sysytem with the OOM but much quicker. cp using all system
> memory (32Gb) in 1 minute, another 500K into swap adds another 15 secs,
> and the OOM kills the system. So both cp and rsync act broken.
>
> rsync, with a --bwlimit=3m set, takes much longer to kill the system but
> the amount of data moved is very similar, 13.5G from clean disk to
> system freeze for rsync, 13.4G for cp.
On 1/16/24 18:10, gene heskett wrote:
On 1/16/24 11:08, Thomas Schmitt wrote:
ls -l /dev/sd[ij]*
oot@coyote:~# ls -l /dev/sd[ij]*
brw-rw---- 1 root disk 8, 128 Jan 16 05:01 /dev/sdi
brw-rw---- 1 root disk 8, 129 Jan 16 05:01 /dev/sdi1
brw-rw---- 1 root disk 8, 144 Jan 16 05:01 /dev/sdj
brw-rw---- 1 root disk 8, 145 Jan 16 05:01 /dev/sdj1
root@coyote:~#
lsblk -d -o NAME,MAJ:MIN,MODEL,SERIAL,WWN /dev/sd[hijkl]
gene@coyote:~/src/klipper-docs$ lsblk -d -o
NAME,MAJ:MIN,MODEL,SERIAL,WWN /dev/sd[hijkl]
NAME MAJ:MIN MODEL SERIAL WWN
sdh 8:112 Gigastone SSD GSTD02TB230102
sdi 8:128 Gigastone SSD GST02TBG221146
sdj 8:144 Gigastone SSD GST02TBG221146
sdk 8:160 Gigastone SSD GSTG02TB230206
sdl 8:176 Gigastone SSD GSTG02TB230206
I suggest removing one GST02TBG221146 and one GSTG02TB230206. Put them
on the shelf, in other computer(s), or sell them. Then perhaps copying
the /home RAID10 2 TB to one Gigastone 2 TB SSD would work.
David
