Le Vendredi 9 Ao�t 2002 11:28, vous avez �crit :
> Le Vendredi 9 Ao�t 2002 10:02, nono a �crit :
> > Salut christophe (les christophe)
> > Avec les vacances je vais et je viens. Donc je consulte la liste moins
> > r�guli�rement mai l� je tombe sur un sujet qui me pr�occupe aussi.
> > Donc je suis les instructions et voil� ce que �a donne:
> >
> > Le Jeudi 8 Ao�t 2002 01:55, vous avez �crit :
> > > Le Mercredi 7 Ao�t 2002 21:21, Christophe PEREZ a �crit :
> > > > Le Wed, 07 Aug 2002 15:13:40 -0400, christophe Josselin a �crit :
> > > > > pour commencer donne nous le resultat de la commande glxinfo
> > > >
> > > > Voil� m'sieur :
> > > >
> > > > name of display: :0.0
> > > > display: :0 screen: 0
> > > > direct rendering: No
> >
> > idem pour moi
> >
> > > Voila, l'acc�l�ration n'est pas active
> > > Donc maintenant on va v�rifier si le module agpart est actif, pour cela
> > > j'ai besoin du r�sultat de la commande lsmod (avec un l comme LIMA)
> > > ex�cut�e en console sous root, pour connaitre les modules charg�s
> > > etactifs.
> > >
> > > Si tu ne vois pas agpart dans la liste affich�e, toujours en root, tu
> > > execute insmod agpart et tu me donne le r�sultat.
> >
> > je fais (apr�s correctif de ta part) # modprobe agpgart
> >
> > > Ces manipulations sont valables pour tous ceux qui ont des probl�mes
> > > d'acc�l�ration 3D
> >
> > d'o� mes essais :-)
> >
> > je v�rifie par lsmod -> ok le module le module est l�:
> > # lsmod
> > Module Size Used by Tainted: P
> > agpgart 31552 0 (unused)
> > etc.....
>
> ..../....
>
> bizare, les num�ros de versions glx et mesa sont diff�rent. Quelle version
> utlises-tu?
Les version livr�es de base avec la MDK8.2 download edition. Apparemment,
d'apr�s glxinfo:
server glx version string: 1.4 Mesa 4.0.1
client glx version string: 1.4 Mesa 4.0.1
OpenGL version string: 1.3 Mesa 4.0.1
glu version: 1.3
Pour XFree86 c'est la 4.2.0:
# X -version
XFree86 Version 4.2.0 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.18-1mdksmp i686 [ELF]
Module Loader present
#
>
> Il me faut tout le lsmod pour voir si le module de ta carte video est bien
> charg�e
Voil� pour le lsmod:
]# lsmod
Module Size Used by Tainted: P
isofs 25792 0 (autoclean)
inflate_fs 19328 0 (autoclean) [isofs]
agpgart 31552 0 (unused)
ppp_deflate 42240 0 (autoclean)
bsd_comp 4544 0 (autoclean)
ppp_async 6560 0 (autoclean)
ppp_generic 19880 0 (autoclean) [ppp_deflate bsd_comp ppp_async]
slhc 5056 0 (autoclean) [ppp_generic]
sr_mod 15160 0 (autoclean) (unused)
via82cxxx_audio 18144 0
uart401 6336 0 [via82cxxx_audio]
ac97_codec 9568 0 [via82cxxx_audio]
sound 57292 0 [via82cxxx_audio uart401]
soundcore 4068 4 [via82cxxx_audio sound]
lp 6464 0
af_packet 12488 0 (autoclean)
ip_vs 65400 0 (autoclean)
ov511 66848 0
videodev 4896 1 [ov511]
usb-uhci 21668 0 (unused)
usbcore 59072 1 [ov511 usb-uhci]
8139too 14336 1 (autoclean)
mii 1360 0 (autoclean) [8139too]
iptable_filter 1952 1 (autoclean)
ipt_MASQUERADE 1504 1 (autoclean)
iptable_nat 15988 1 [ipt_MASQUERADE]
ip_tables 11584 5 [iptable_filter ipt_MASQUERADE iptable_nat]
ip_conntrack 15180 1 [ipt_MASQUERADE iptable_nat]
nls_iso8859-15 3360 2 (autoclean)
nls_cp850 3584 2 (autoclean)
vfat 9788 2 (autoclean)
fat 31384 0 (autoclean) [vfat]
supermount 62180 2 (autoclean)
sd_mod 11644 0 (autoclean) (unused)
ide-scsi 8032 0
scsi_mod 92488 3 [sr_mod sd_mod ide-scsi]
parport_pc 22088 1 (autoclean)
parport 23968 1 [lp parport_pc]
rtc 5912 0 (autoclean)
ext3 62092 6
jbd 39356 6 [ext3]
#
>
> > et voici pour ma carte vid�o (infos trouv�s dans
> > file:/etc/sysconfig/hwconf):
> >
> > -
> > class: VIDEO
> > bus: PCI
> > detached: 0
> > device: fb0
> > driver: Card:RIVA TNT2
> > desc: "nVidia Corporation|Riva TNT2 Model 64"
> > vendorId: 10de
> > deviceId: 002d
> > subVendorId: 1048
> > subDeviceId: 0c3a
> > pciType: 1
> > -
> >
> > Donc si tu as une id�e, n'h�site pas. Il me semble qu'il me reste � faire
> > quelquechose pour charger le pilote de carte. Toute la difficult� est
> > "comment faire ?" (et si possible le faire bien ;-)))
> > a+
> > nono
>
> En, effet mais chaque chose en son temps, ensuite on met les mains dans le
> cambouit en modifiant un peu le /etc/X11/XF86config-4 mais l� je suis sur
> une "vieille" b�cane sur laquelle la carte vid�o (matrox millenium de 1996)
> ne suporte pas l'openGL, donc je suis plus limit� pour vous aid�. mais de
> m�moire, dans ce fichier il y a une section avec glx et dri qui doivent
> �tre activ�. Ne pas oublier de faire une sauvegarde de ce fichier AVANT
> toute intervention, sinon AIE!!!!
En effet je crois que tout va r�sumer dans XF86config-4 doc voici mon fichier:
# File generated by XFdrake.
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
#NoTrapSignals
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
#DontZap
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
#DontZoom
# This allows the server to start up even if the
# mouse device can't be opened/initialised.
AllowMouseOpenFail
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Keyboard section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "250 30"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
EndSection
# **********************************************************************
# Pointer section
# **********************************************************************
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "4 5"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
Section "Module"
# This loads the DBE extension module.
Load "dbe"
# This loads the Video for Linux module.
Load "v4l"
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
#Option "omit xfree86-dga"
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Generic|Generic Monitor, 1280x1024 @ 60 Hz"
VendorName "Generic"
ModelName "Unknown"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5-64.3
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-70
# This is a set of extended mode timings typically used for laptop,
# TV fullscreen mode or DVD fullscreen output.
# These are available along with standard mode timings.
# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync
-vsync
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
Section "Device"
Identifier "Generic VGA"
Driver "vga"
EndSection
Section "Device"
Identifier "RIVA TNT2"
VendorName "Unknown"
BoardName "Unknown"
Driver "nv"
# VideoRam 4096
# Clock lines
# Uncomment following option if you see a big white block
# instead of the cursor!
# Option "sw_cursor"
Option "DPMS" "on"
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
Section "Screen"
Identifier "screen1"
Device "RIVA TNT2"
Monitor "Generic|Generic Monitor, 1280x1024 @ 60 Hz"
DefaultColorDepth 16
Subsection "Display"
Depth 8
Modes "800x600" "640x400"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
Identifier "layout1"
Screen "screen1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
merci d'avance pour tes r�ponses (et celles de Jipe aussi)
nono
Vous souhaitez acquerir votre Pack ou des Services MandrakeSoft?
Rendez-vous sur "http://www.mandrakestore.com";
