Le Samedi 10 Août 2002 12:28, vous avez écrit : > On Sat, 10 Aug 2002 02:20:13 +0200 > nono <[EMAIL PROTECTED]> wrote: > > je te propose pour commencer les modifs suivantes dans les sections idoines > de XFConfig-4... après sauvegarde du fichier original. > > Section "Module" > > # This loads the DBE extension module. > Load "dbe" > > Load "glx" > Load "dri"
> Section "Device" > Identifier "RIVA TNT2" > VendorName "Unknown" > BoardName "Unknown" > Driver "nv" > # VideoRam 4096 > # Clock lines > > > # Uncomment following option if you see a big white block > # instead of the cursor! > # Option "sw_cursor" > > Option "DPMS" "on" > Option "AGPMode" "1" > EndSection C'est fait. Je n'ai malheureusement pas trouvé d'améliorations (FlightGear est lent et la musique de chromium est pire qu'avant). Ces deux jeux restent injouables. ¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬ Donc voilà au complet mon XF86Config-4 # File generated by XFdrake. # ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ********************************************************************** Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (they are concatenated together) # By default, Mandrake 6.0 and later now use a font server independent of # the X server to render fonts. FontPath "unix/:-1" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging #NoTrapSignals # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence # This allows clients to receive this key event. #DontZap # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching # sequences. This allows clients to receive these key events. #DontZoom # This allows the server to start up even if the # mouse device can't be opened/initialised. AllowMouseOpenFail EndSection # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Keyboard section # ********************************************************************** Section "InputDevice" Identifier "Keyboard1" Driver "Keyboard" Option "AutoRepeat" "250 30" Option "XkbRules" "xfree86" Option "XkbModel" "pc105" Option "XkbLayout" "fr" EndSection # ********************************************************************** # Pointer section # ********************************************************************** Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/mouse" Option "ZAxisMapping" "4 5" # ChordMiddle is an option for some 3-button Logitech mice # Option "ChordMiddle" EndSection Section "Module" # This loads the DBE extension module. Load "dbe" Load "glx" Load "dri" # This loads the Video for Linux module. Load "v4l" # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. SubSection "extmod" #Option "omit xfree86-dga" EndSubSection # This loads the Type1 and FreeType font modules Load "type1" Load "freetype" EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" Identifier "Generic|Generic Monitor, 1280x1024 @ 60 Hz" VendorName "Generic" ModelName "Unknown" # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. HorizSync 31.5-64.3 # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. VertRefresh 50-70 # This is a set of extended mode timings typically used for laptop, # TV fullscreen mode or DVD fullscreen output. # These are available along with standard mode timings. # Sony Vaio C1(X,XS,VE,VN)? # 1024x480 @ 85.6 Hz, 48 kHz hsync ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync # 768x576 @ 79 Hz, 50 kHz hsync ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630 # 768x576 @ 100 Hz, 61.6 kHz hsync ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616 EndSection # ********************************************************************** # Graphics device section # ********************************************************************** Section "Device" Identifier "Generic VGA" Driver "vga" EndSection Section "Device" Identifier "RIVA TNT2" VendorName "Unknown" BoardName "Unknown" Driver "nv" # VideoRam 4096 # Clock lines # Uncomment following option if you see a big white block # instead of the cursor! # Option "sw_cursor" Option "DPMS" "on" Option "AGPMode" "1" EndSection # ********************************************************************** # Screen sections # ********************************************************************** Section "Screen" Identifier "screen1" Device "RIVA TNT2" Monitor "Generic|Generic Monitor, 1280x1024 @ 60 Hz" DefaultColorDepth 16 Subsection "Display" Depth 8 Modes "800x600" "640x400" ViewPort 0 0 EndSubsection Subsection "Display" Depth 16 Modes "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 24 Modes "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 32 Modes "800x600" "640x480" ViewPort 0 0 EndSubsection EndSection Section "ServerLayout" Identifier "layout1" Screen "screen1" InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard" EndSection ¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬ Voilà des infos supplémentaires. A noter que agpgart est chargé en module. # dmesg | grep agpgart Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 439M agpgart: Detected Via Apollo Pro KT133 chipset agpgart: AGP aperture is 64M @ 0xd0000000 # glxinfo | grep renderer Loading required GL library /usr/X11R6/lib/libGL.so.1.2 OpenGL renderer string: Mesa GLX Indirect # locate libGL.so.1 /usr/X11R6/lib/libGL.so.1.3.401 /usr/X11R6/lib/libGL.so.1.0 /usr/X11R6/lib/libGL.so.1 /usr/X11R6/lib/libGL.so.1.2 # locate libGLU.so.1 /usr/X11R6/lib/libGLU.so.1 /usr/X11R6/lib/libGLU.so.1.3.401 # locate libglut.so.3 /usr/X11R6/lib/libglut.so.3.7.0 /usr/X11R6/lib/libglut.so.3 Voici la rnouvelle réponse à glxinfo (beaucoup moins d'info depuis que XF86Config.4 a été modifié......bizarre) # glxinfo name of display: :0.0 Loading required GL library /usr/X11R6/lib/libGL.so.1.2 display: :0 screen: 0 direct rendering: No server glx vendor string: SGI server glx version string: 1.2 server glx extensions: GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context client glx vendor string: SGI client glx version string: 1.2 client glx extensions: GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context GLX extensions: GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context OpenGL vendor string: VA Linux Systems, Inc. OpenGL renderer string: Mesa GLX Indirect OpenGL version string: 1.2 Mesa 3.4.2 OpenGL extensions: GL_ARB_multitexture, GL_EXT_abgr, GL_EXT_blend_color, GL_EXT_blend_minmax, GL_EXT_blend_subtract glu version: 1.3 glu extensions: GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat ---------------------------------------------------------------------- 0x23 16 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None 0x24 16 tc 0 16 0 r y . 5 6 5 0 0 16 8 16 16 16 0 0 0 None 0x25 16 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None 0x26 16 dc 0 16 0 r y . 5 6 5 0 0 16 8 16 16 16 0 0 0 None [root@mdkpingus nono]# Que me reste-t-il à faire pour pouvoir profiter de ces jeux ??? merci d'avance nono
Vous souhaitez acquerir votre Pack ou des Services MandrakeSoft? Rendez-vous sur "http://www.mandrakestore.com"