> > Any, no, you do not want to put HOPHIGH at zero, > > because then Declude will only process the IP the > > message came from. It is suggested to have HOPHIGH > > at 1 or 2, but no more than 2. > > Wrong, "HOPHIGH 0" is the default setting. HOPHIGH counts hops from the IP > address that connected to your IMail server (that one being HOP 0) backwards > to the original sender, not the reverse. Thus, "HOPHIGH 0" will tell > Declude to only run IP checks on the IP address of the server that connected > to your IMail server and not any other interim hops leading back to the > original senders IP address.
OK Bill, wrong on a technicality. What I meant to say was the last IP that the message come from. It has been too long of a day. I am still have 45 minutes to go on a problem I am fighting right now on a server. John Tolmachoff MCSE CSSA Engineer/Consultant eServices For You www.eservicesforyou.com --- [This E-mail was scanned for viruses by Declude Virus (http://www.declude.com)] --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com.
