Use SKIPIP John T eServices For You
> -----Original Message----- > From: [EMAIL PROTECTED] [mailto:Declude.JunkMail- > [EMAIL PROTECTED] On Behalf Of Mark E. Smith > Sent: Saturday, June 25, 2005 3:02 PM > To: [email protected] > Subject: [Declude.JunkMail] Question about load balancers and source IP > > We have 3 declude gateway servers that sit in front of our Exchange system. > We want to move the three round-robin DNS servers to a VIP on our Foundry > Load Balancers. > > The load balancers can be setup in a source NAT configuration (which is > easier) or DSR (Direct Server Return). > In source NAT the VIP on the Foundy Load Balancer is the source address that > Declude sees. In DSR the physical SMTP server is the source IP address. > > DSR is difficult to configure. > > So, here's my question. > Does Declude/IMAIL care about the IP address that's making the connection? > In other words, does it use that IP address for its tests? If so, will HOP=1 > fix this? > > > > --- > This E-mail came from the Declude.JunkMail mailing list. To > unsubscribe, just send an E-mail to [EMAIL PROTECTED], and > type "unsubscribe Declude.JunkMail". The archives can be found > at http://www.mail-archive.com. --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com.
