On Monday, 13 October 2014 16:15:53 UTC+5, florin.strugariu wrote: > I had the same issue with my flame. > > > > Take out the battery and put it back in; Then press the power button and > > vol down at the same time for a few sec. > > This should start the phone in fast boot mode. After this you can run > > the flash script. > > > > > > Hope it works, > > Bebe > > > > On 11.10.2014 15:28, Michael Meelis wrote: > > > Op vrijdag 10 oktober 2014 20:37:32 UTC+2 schreef Kartikaya Gupta: > > >> On 9/10/2014, 15:57, Michael Meelis wrote: > > >> > > >>> Hi, seems I bricked my flame with a 2.1 shallow-flash over 1.3 installed. > >>> Seems I read the instruction page incorrectly and was hoping for some > >>> safeguard protection. > > >>> fastboot <...> is not working anymore. 'adb sideload <filename>' does > >>> still work. Problem is: I keep on getting aborts because of signature > >>> validation errors. > > >>> Can anyone point me to instructions to get met Flame back up and running > >>> with 1.3, 2.x or the upcoming release? > > >> > > >> > > >> My advice is to flash the v180 base image that you can download from here: > > >> > > >> > > >> > > >> https://developer.mozilla.org/en-US/Firefox_OS/Developer_phone_guide/Flame#Updating_your_Flame%27s_software > > >> > > >> > > >> > > >> If adb sideload is working, then 'adb reboot bootloader' should work as > > >> > > >> well, and so the flash script included in the zip file should work > > >> > > >> as-is. If you have trouble getting into fastboot you can take out the > > >> > > >> battery and then put it back in while holding down volume-down and power > > >> > > >> simultaneously. (as described at > > >> > > >> https://developer.mozilla.org/en-US/Firefox_OS/Developer_phone_guide/Flame#Fastboot_mode) > > >> > > >> > > >> > > >> Cheers, > > >> > > >> kats > > > Thx for the suggestion. I had already tried them in every possible > > variation and mutation. What about this 'special cable' option? > > > _______________________________________________ > > > dev-b2g mailing list > > > [email protected] > > > https://lists.mozilla.org/listinfo/dev-b2g > > >
Problem I face is that when these instructions are followed (whether Power+VolDown or adb reboot bootloader) by set boots displaying the ThunderSoft logo and stays that way for indefinite time. _______________________________________________ dev-b2g mailing list [email protected] https://lists.mozilla.org/listinfo/dev-b2g
