Some versions of the flame bootlaoder just show the thundersoft logo when in fastboot mode.
Use "fastboot devices" to see if a fastboot device is detected. I normally do it this way: - unplug usb cable - power off phone - pull battery for 10 seconds - Press and Hold Volume Down - Press and Hold Power - Once you see a logo, you should be in fastboot mode - Replug USB cable in - Issue fastboot devices command to verify Dave Hylands ----- Original Message ----- > From: "Michael Meelis" <[email protected]> > To: [email protected] > Sent: Wednesday, October 22, 2014 3:34:04 AM > Subject: Re: [b2g] Bricked flame. help: Only adb sideload file still works. > Op maandag 20 oktober 2014 10:14:23 UTC+2 schreef [email protected]: > > On Tuesday, 14 October 2014 12:37:02 UTC+5, Julien Wajsberg wrote: > > > > > > Problem I face is that when these instructions are followed (whether > > > > > > > > > > Power+VolDown or adb reboot bootloader) by set boots displaying the > > > > > > > > > > ThunderSoft logo and stays that way for indefinite time. > > > > > > > > > > > > > > > > > > > > This is fastboot mode :) > > > > > > > > > > > > > > > > > > > > In this state, you can plug in your device, call "fastboot devices", and > > > > > > > > > > expect to see your device in the list. > > > > > > > > > > Then you can launch the v180 flash script. > > > > > > > > I am unable to get into the fastboot mode in the first place. It hangs on > > ThunderSoft logo. > Thx for all the standard suggestions. I have tried them. They don't work for > me. I really ready for something new now. Like: instruction how to do the > adb sideload or this 'special cable' or something entirely different. > _______________________________________________ > dev-b2g mailing list > [email protected] > https://lists.mozilla.org/listinfo/dev-b2g
_______________________________________________ dev-b2g mailing list [email protected] https://lists.mozilla.org/listinfo/dev-b2g
