Hi Alex, Now it never crash for me... I did has running it for 3 times, with success status on all of them when finish… Btw, here have you, the memory value results:
https://dl.dropboxusercontent.com/u/6962400/memory-point-error.png https://dl.dropboxusercontent.com/u/6962400/memory-at-finish.png I think that problem was happened by an url access error on this line: get-with-no-params: [get] Getting: https://github.com/swfobject/swfobject/archive/2.2.zip?ts=201407031035 [get] To: /Library/Flex/FlexSDK/4.13.0/in/swfobject_2_2.zip [get] Redirected to: https://codeload.github.com/swfobject/swfobject/zip/2.2 Because at this point was where I getting crash, when process failed... Thanks, ______________________ Jose Barragan Senior Software Engineer Codeoscopic +34 912 94 80 80 http://www.codeoscopic.com On 02 Jul 2014, at 06:49, Alex Harui <aha...@adobe.com> wrote: > That's strange that it worked after several failures. No obvious differences > from the logs. > > If you have time, can you try again and keep an eye on memory usage as the > installer finishes up the AIR SDK install and continues on to playerglobal > and swfobject. > > Thanks, > -Alex > ________________________________________ > From: Jose Barragan [jose.barra...@codeoscopic.com] > Sent: Tuesday, July 1, 2014 4:42 PM > To: dev@flex.apache.org > Subject: Re: [DISCUSS] Discuss Release Apache Flex SDK Installer 3.1 - RC5 > > Hi Alex, > > Got it!! :) > > Using the absolute path, it works fine (for log file, at least…) > I attached here, the log file with all process info until crash point. > > https://dl.dropboxusercontent.com/u/6962400/installlog.txt > > In a second try without verbose download progress, I got an installation > success :O :) > https://dl.dropboxusercontent.com/u/6962400/installlog-works.txt > > Thanks, > ______________________ > Jose Barragan > Senior Software Engineer > Codeoscopic > +34 912 94 80 80 > http://www.codeoscopic.com > > On 01 Jul 2014, at 16:13, Alex Harui <aha...@adobe.com> wrote: > >> Hi Jose, >> >> Does it also fail if you use absolute path to installlog.txt? Instead of >> ~/installlog.txt try /Users/jbarragan/installlog.txt (or whatever your user >> name is). >> >> Thanks, >> -Alex >> ________________________________________ >> From: Jose Barragan [jose.barra...@codeoscopic.com] >> Sent: Tuesday, July 1, 2014 1:18 AM >> To: dev@flex.apache.org >> Subject: Re: [DISCUSS] Discuss Release Apache Flex SDK Installer 3.1 - RC5 >> >> Hi Alex, >> >> Same here with the latest version… >> https://dl.dropboxusercontent.com/u/6962400/installer-with-log-freeze2.png >> >> Regarding your question about the behaviour when is normally launched, the >> answer is yes, only keep waiting when is launched from command line with >> -log=xxxx, in fact if launch it from command without -log argument, working >> fine too. >> >> Thanks, >> ______________________ >> Jose Barragan >> Senior Software Engineer >> Codeoscopic >> +34 912 94 80 80 >> http://www.codeoscopic.com >> >> On 01 Jul 2014, at 06:25, Alex Harui <aha...@adobe.com> wrote: >> >>> Also, I fixed the line-feed issue and refreshed the files on my folder. >>> >>> Thanks, >>> -Alex >>> ________________________________________ >>> From: Alex Harui [aha...@adobe.com] >>> Sent: Monday, June 30, 2014 9:10 PM >>> To: dev@flex.apache.org >>> Subject: RE: [DISCUSS] Discuss Release Apache Flex SDK Installer 3.1 - RC5 >>> >>> Interesting. It is acting like it couldn't fetch the localized strings >>> from flex.a.o. Maybe there was a network glitch. Or maybe an unexpected >>> exception. >>> >>> Does it work if you launch it normally? Maybe the -log= option is screwing >>> it up. Also try an absolute path to the log file. >>> >>> Thanks, >>> -Alex >>> ________________________________________ >>> From: Jose Barragan [jose.barra...@codeoscopic.com] >>> Sent: Monday, June 30, 2014 5:35 PM >>> To: dev@flex.apache.org >>> Subject: Re: [DISCUSS] Discuss Release Apache Flex SDK Installer 3.1 - RC5 >>> >>> Hi Alex, >>> >>> I just tried testing your latest version, but I couldn't, because when it >>> has launched from terminal as you told me, the app stuck on a waiting >>> status, as you can see on next screenshot... >>> >>> https://dl.dropboxusercontent.com/u/6962400/installer-with-log-freeze.png >>> >>> ...the busy cursor never ends, and the buttons keep on a fuzzy and disabled >>> status all them. >>> >>> Thanks, >>> ______________________ >>> Jose Barragan >>> Senior Software Engineer >>> Codeoscopic >>> +34 912 94 80 80 >>> http://www.codeoscopic.com >>> >>> On 30 Jun 2014, at 19:33, Alex Harui <aha...@adobe.com> wrote: >>> >>>> I put an early version of log file in my personal folder. For some reason >>>> the line-endings aren't right but I'm out of time for now. Uninstall your >>>> current version and try the one here: >>>> >>>> http://people.apache.org/~aharui/temp/ >>>> >>>> Use a terminal window and run it like this: >>>> >>>> /Applications/Apache\ Flex/Apache\ Flex\ SDK\ >>>> Installer.app/Contents/MacOS/Apache\ Flex\ SDK\ Installer >>>> -log=~/installlog.txt >>>> >>>> Thanks, >>>> -Alex >>>> ________________________________________ >>>> From: Jose Barragan [jose.barra...@codeoscopic.com] >>>> Sent: Monday, June 30, 2014 8:39 AM >>>> To: dev@flex.apache.org >>>> Subject: Re: [DISCUSS] Discuss Release Apache Flex SDK Installer 3.1 - RC5 >>>> >>>> Hi Alex, >>>> >>>> The Installer disappear when it crashes... this log is incomplete, because >>>> I could swear I reached to see appearing more lines, but I didn't reach to >>>> catch them. >>>> >>>> We could include an physical export of installation log to a console file >>>> or similar, for these cases, don't you think? >>>> >>>> [============LOG==============] >>>> >>>> Version 3.1.0 (mac) >>>> Using Locale: en_ES >>>> Fetched the SDK download mirror URL from the CGI. >>>> AIR version 14.0 >>>> Flash Player version 14.0 >>>> Creating Apache Flex home >>>> Creating temporary directory >>>> Downloading Apache Flex SDK from: >>>> https://dist.apache.org/repos/dist/dev/flex/sdk/4.13.0/rc2/binaries/apache-flex-sdk-4.13.0-bin.tar.gz >>>> downloading >>>> https://dist.apache.org/repos/dist/dev/flex/sdk/4.13.0/rc2/binaries/apache-flex-sdk-4.13.0-bin.tar.gz >>>> not caching this download >>>> Verifying Apache Flex SDK MD5 Signature >>>> The Apache Flex SDK MD5 Signature of the downloaded files matches the >>>> reference. The file is valid. >>>> Uncompressing: >>>> /Library/Flex/FlexSDK/4.13.0.RC2/temp/apache-flex-sdk-4.13.0-bin.tar.gz >>>> Finished uncompressing: >>>> /Library/Flex/FlexSDK/4.13.0.RC2/temp/apache-flex-sdk-4.13.0-bin.tar.gz >>>> [get] Getting: >>>> http://flex.apache.org/installer/properties/sdk/en_US.properties >>>> [get] To: /Library/Flex/FlexSDK/4.13.0.RC2/en_US.properties >>>> [IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 >>>> text="Error #2032" errorID=2032] >>>> >>>> get-data: >>>> [get] Getting: >>>> http://flex.apache.org/installer/sdk-installer-config-4.0.xml?ts=201406300520 >>>> [get] To: /Library/Flex/FlexSDK/4.13.0.RC2/sdk-installer-config-4.0.xml >>>> >>>> get-air-md5-data: >>>> >>>> get-flash-md5-data: >>>> >>>> get-md5-data: >>>> >>>> check-binary: >>>> >>>> ask-air: >>>> >>>> ask-flash: >>>> >>>> ask-swfobject: >>>> >>>> ask-adobe-osmf: >>>> >>>> ask-adobe-fontswf: >>>> >>>> ask-adobe-blazeds: >>>> >>>> ask-licenses: >>>> >>>> ask-licenses: >>>> >>>> air-check: >>>> >>>> air-download: >>>> [mkdir] Created dir: /Library/Flex/FlexSDK/4.13.0.RC2/in >>>> >>>> air-get-check: >>>> >>>> air-get: >>>> Downloading Adobe AIR Runtime Kit for Mac from: >>>> http://airdownload.adobe.com/air/mac/download/14.0//AdobeAIRSDK.tbz2 >>>> >>>> download_air: >>>> >>>> download_air_with_md5: >>>> >>>> check-cache: >>>> >>>> download_using_get: >>>> >>>> get-if-not-cached: >>>> >>>> check-params: >>>> >>>> get-with-no-params: >>>> [get] Getting: >>>> http://airdownload.adobe.com/air/mac/download/14.0//AdobeAIRSDK.tbz2?ts=201406300520 >>>> [get] To: /Library/Flex/FlexSDK/4.13.0.RC2/in/AdobeAIRSDK.tbz2 >>>> >>>> check-params: >>>> >>>> get-with-params: >>>> >>>> check-params: >>>> >>>> get-local: >>>> >>>> check-sum: >>>> Validating download: /Library/Flex/FlexSDK/4.13.0.RC2/in/AdobeAIRSDK.tbz2 >>>> >>>> put-in-cache: >>>> >>>> copy-if-cached: >>>> >>>> air-setup-win: >>>> >>>> air-setup-mac: >>>> [mkdir] Created dir: /Library/Flex/FlexSDK/4.13.0.RC2/in/airsdk >>>> [move] Moving 1 file to >>>> /Library/Flex/FlexSDK/4.13.0.RC2/in/airsdk/AdobeAIRSDK.tbz2 >>>> Finished untaring: >>>> /Library/Flex/FlexSDK/4.13.0.RC2/in/airsdk/AdobeAIRSDK.tar >>>> [delete] Deleting: /Library/Flex/FlexSDK/4.13.0.RC2/airtar.properties >>>> >>>> mac-copy-file: >>>> [mkdir] Created dir: /Library/Flex/FlexSDK/4.13.0.RC2 >>>> >>>> mac-copy-file: >>>> [mkdir] Created dir: /Library/Flex/FlexSDK/4.13.0.RC2 >>>> >>>> mac-copy-file: >>>> [mkdir] Created dir: /Library/Flex/FlexSDK/4.13.0.RC2 >>>> >>>> mac-copy-file: >>>> [mkdir] Created dir: /Library/Flex/FlexSDK/4.13.0.RC2/bin >>>> >>>> mac-copy-file: >>>> [mkdir] Created dir: /Library/Flex/FlexSDK/4.13.0.RC2/bin >>>> >>>> mac-copy-file: >>>> [mkdir] Created dir: /Library/Flex/FlexSDK/4.13.0.RC2/lib >>>> >>>> mac-copy-file: >>>> [mkdir] Created dir: /Library/Flex/FlexSDK/4.13.0.RC2/samples >>>> >>>> mac-copy-dir: >>>> [delete] Deleting: /Library/Flex/FlexSDK/4.13.0.RC2/maccopy.properties >>>> Copying files from >>>> /Library/Flex/FlexSDK/4.13.0.RC2/in/airsdk/frameworks/libs/air to >>>> /Library/Flex/FlexSDK/4.13.0.RC2/frameworks/libs >>>> >>>> mac-copy-dir: >>>> [delete] Deleting: /Library/Flex/FlexSDK/4.13.0.RC2/maccopy.properties >>>> Copying files from >>>> /Library/Flex/FlexSDK/4.13.0.RC2/in/airsdk/frameworks/projects/air to >>>> /Library/Flex/FlexSDK/4.13.0.RC2/frameworks/projects >>>> >>>> mac-copy-dir: >>>> [delete] Deleting: /Library/Flex/FlexSDK/4.13.0.RC2/maccopy.properties >>>> Copying files from /Library/Flex/FlexSDK/4.13.0.RC2/in/airsdk/include to >>>> /Library/Flex/FlexSDK/4.13.0.RC2 >>>> >>>> mac-check-exists: >>>> >>>> mac-copy-dir-if-exists: >>>> >>>> mac-copy-dir: >>>> [delete] Deleting: /Library/Flex/FlexSDK/4.13.0.RC2/maccopy.properties >>>> Copying files from /Library/Flex/FlexSDK/4.13.0.RC2/in/airsdk/lib/android >>>> to /Library/Flex/FlexSDK/4.13.0.RC2/lib >>>> >>>> mac-copy-dir: >>>> [delete] Deleting: /Library/Flex/FlexSDK/4.13.0.RC2/maccopy.properties >>>> Copying files from /Library/Flex/FlexSDK/4.13.0.RC2/in/airsdk/lib/aot to >>>> /Library/Flex/FlexSDK/4.13.0.RC2/lib >>>> >>>> (…) >>>> >>>> [============LOG==============] >>>> >>>> ______________________ >>>> Jose Barragan >>>> Senior Software Engineer >>>> Codeoscopic >>>> +34 912 94 80 80 >>>> http://www.codeoscopic.com >>>> >>>> On 30 Jun 2014, at 16:55, Alex Harui <aha...@adobe.com> wrote: >>>> >>>>> Do you have time to try again with verbose logging and try to keep the >>>>> log window open and scrolled to the bottom so we can try to find out what >>>>> it was doing when it crashed? >>>>> >>>>> Thanks, >>>>> -Alex >>>>> ________________________________________ >>>>> From: Jose Barragan [jose.barra...@codeoscopic.com] >>>>> Sent: Monday, June 30, 2014 3:59 AM >>>>> To: dev@flex.apache.org >>>>> Subject: Re: [DISCUSS] Discuss Release Apache Flex SDK Installer 3.1 - RC5 >>>>> >>>>> Hi, testing the new Installer I got an exception when tried to install >>>>> the 4.13.0 RC2 FDK but doesn’t happened when installing 4.12.1 ... >>>>> >>>>> Process: Apache Flex SDK Installer [5570] >>>>> Path: /Applications/Apache Flex/Apache Flex SDK >>>>> Installer.app/Contents/MacOS/Apache Flex SDK Installer >>>>> Identifier: org.apache.flex.installapacheflex >>>>> Version: 3.1.0 (???) >>>>> Code Type: X86 (Native) >>>>> Parent Process: launchd [277] >>>>> Responsible: Apache Flex SDK Installer [5570] >>>>> User ID: 501 >>>>> >>>>> Date/Time: 2014-06-30 12:43:37.045 +0200 >>>>> OS Version: Mac OS X 10.9.3 (13D65) >>>>> Report Version: 11 >>>>> Anonymous UUID: 74662061-F9E9-E13F-709F-F0DD028953BA >>>>> >>>>> >>>>> Crashed Thread: 9 com.apple.NSURLConnectionLoader >>>>> >>>>> Exception Type: EXC_CRASH (SIGABRT) >>>>> Exception Codes: 0x0000000000000000, 0x0000000000000000 >>>>> >>>>> Application Specific Information: >>>>> terminating with uncaught exception of type Security::UnixError: UNIX >>>>> error exception >>>>> abort() called >>>>> >>>>> >>>>> >>>>> anybody knows something about that? >>>>> ______________________ >>>>> Jose Barragan >>>>> Senior Software Engineer >>>>> Codeoscopic >>>>> +34 912 94 80 80 >>>>> http://www.codeoscopic.com >>>>> >>>>> On 29 Jun 2014, at 07:53, Alex Harui <aha...@adobe.com> wrote: >>>>> >>>>>> That's great to hear. >>>>>> >>>>>> On 6/28/14 9:34 PM, "周 戈" <darkst...@163.com> wrote: >>>>>> >>>>>>> Hi Alex, >>>>>>> >>>>>>> I’ve tested Flex SDK Installer 3.1 RC5: >>>>>>> >>>>>>> Flex 4.13.0 RC2 + AIR 14 + FP 14 - Installation Completed Successfully >>>>>>> in >>>>>>> the 1st run. >>>>>>> >>>>>>> FlexJS 0.0.2 RC2 + AIR 14 + FP 14 - Installation Completed Successfully >>>>>>> in the 4th run (previous 3 runs failed when downloading Apache Flex SDK, >>>>>>> guess it’s the mirror server connection problem). >>>>>>> >>>>>>> The Chinese Translations are perfect, even the [Copy Log] button is >>>>>>> translated in Chinese, very nice! >>>>>>> >>>>>>> I think it’s good enough to make a release version of the Flex SDK >>>>>>> Installer now, based on the installation results. >>>>>>> >>>>>>> >>>>>>> DarkStone >>>>>>> 2014-06-29 >>>>>>> >>>>>>> 在 2014-06-28，00:59，Alex Harui <aha...@adobe.com> 写道： >>>>>>> >>>>>>>> This is the discuss thread. >>>>>>>> >>>>>>>> I built the binaries against AIR 14 (not the beta, since it is a beta). >>>>>>>> >>>>>>>> Besides the latest LICENSE and NOTICE, I also added logging locale >>>>>>>> changes >>>>>>>> and localization of the COPY LOG button. >>>>>>>> >>>>>>>> Changes are minor so votes carry over. >>>>>>>> >>>>>>>> -Alex >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>>
