Hi Jose, OK, thanks for trying. Seems like an AIR bug. Not sure there's a way for us to prevent that.
-Alex On 7/3/14 2:04 AM, "Jose Barragan" <jose.barra...@codeoscopic.com> wrote: >Hi Alex, > >Now it never crash for me... >I did has running it for 3 times, with success status on all of them when >finish… >Btw, here have you, the memory value results: > >https://dl.dropboxusercontent.com/u/6962400/memory-point-error.png > >https://dl.dropboxusercontent.com/u/6962400/memory-at-finish.png > > >I think that problem was happened by an url access error on this line: > >get-with-no-params: > [get] Getting: >https://github.com/swfobject/swfobject/archive/2.2.zip?ts=201407031035 > [get] To: /Library/Flex/FlexSDK/4.13.0/in/swfobject_2_2.zip > [get] Redirected to: >https://codeload.github.com/swfobject/swfobject/zip/2.2 > >Because at this point was where I getting crash, when process failed... > >Thanks, >______________________ >Jose Barragan >Senior Software Engineer >Codeoscopic >+34 912 94 80 80 >http://www.codeoscopic.com > >On 02 Jul 2014, at 06:49, Alex Harui <aha...@adobe.com> wrote: > >> That's strange that it worked after several failures. No obvious >>differences from the logs. >> >> If you have time, can you try again and keep an eye on memory usage as >>the installer finishes up the AIR SDK install and continues on to >>playerglobal and swfobject. >> >> Thanks, >> -Alex >> ________________________________________ >> From: Jose Barragan [jose.barra...@codeoscopic.com] >> Sent: Tuesday, July 1, 2014 4:42 PM >> To: dev@flex.apache.org >> Subject: Re: [DISCUSS] Discuss Release Apache Flex SDK Installer 3.1 - >>RC5 >> >> Hi Alex, >> >> Got it!! :) >> >> Using the absolute path, it works fine (for log file, at least…) >> I attached here, the log file with all process info until crash point. >> >> https://dl.dropboxusercontent.com/u/6962400/installlog.txt >> >> In a second try without verbose download progress, I got an >>installation success :O :) >> https://dl.dropboxusercontent.com/u/6962400/installlog-works.txt >> >> Thanks, >> ______________________ >> Jose Barragan >> Senior Software Engineer >> Codeoscopic >> +34 912 94 80 80 >> http://www.codeoscopic.com >> >> On 01 Jul 2014, at 16:13, Alex Harui <aha...@adobe.com> wrote: >> >>> Hi Jose, >>> >>> Does it also fail if you use absolute path to installlog.txt? Instead >>>of ~/installlog.txt try /Users/jbarragan/installlog.txt (or whatever >>>your user name is). >>> >>> Thanks, >>> -Alex >>> ________________________________________ >>> From: Jose Barragan [jose.barra...@codeoscopic.com] >>> Sent: Tuesday, July 1, 2014 1:18 AM >>> To: dev@flex.apache.org >>> Subject: Re: [DISCUSS] Discuss Release Apache Flex SDK Installer 3.1 - >>>RC5 >>> >>> Hi Alex, >>> >>> Same here with the latest version… >>> >>>https://dl.dropboxusercontent.com/u/6962400/installer-with-log-freeze2.p >>>ng >>> >>> Regarding your question about the behaviour when is normally launched, >>>the answer is yes, only keep waiting when is launched from command line >>>with -log=xxxx, in fact if launch it from command without -log >>>argument, working fine too. >>> >>> Thanks, >>> ______________________ >>> Jose Barragan >>> Senior Software Engineer >>> Codeoscopic >>> +34 912 94 80 80 >>> http://www.codeoscopic.com >>> >>> On 01 Jul 2014, at 06:25, Alex Harui <aha...@adobe.com> wrote: >>> >>>> Also, I fixed the line-feed issue and refreshed the files on my >>>>folder. >>>> >>>> Thanks, >>>> -Alex >>>> ________________________________________ >>>> From: Alex Harui [aha...@adobe.com] >>>> Sent: Monday, June 30, 2014 9:10 PM >>>> To: dev@flex.apache.org >>>> Subject: RE: [DISCUSS] Discuss Release Apache Flex SDK Installer 3.1 >>>>- RC5 >>>> >>>> Interesting. It is acting like it couldn't fetch the localized >>>>strings from flex.a.o. Maybe there was a network glitch. Or maybe an >>>>unexpected exception. >>>> >>>> Does it work if you launch it normally? Maybe the -log= option is >>>>screwing it up. Also try an absolute path to the log file. >>>> >>>> Thanks, >>>> -Alex >>>> ________________________________________ >>>> From: Jose Barragan [jose.barra...@codeoscopic.com] >>>> Sent: Monday, June 30, 2014 5:35 PM >>>> To: dev@flex.apache.org >>>> Subject: Re: [DISCUSS] Discuss Release Apache Flex SDK Installer 3.1 >>>>- RC5 >>>> >>>> Hi Alex, >>>> >>>> I just tried testing your latest version, but I couldn't, because >>>>when it has launched from terminal as you told me, the app stuck on a >>>>waiting status, as you can see on next screenshot... >>>> >>>> >>>>https://dl.dropboxusercontent.com/u/6962400/installer-with-log-freeze.p >>>>ng >>>> >>>> ...the busy cursor never ends, and the buttons keep on a fuzzy and >>>>disabled status all them. >>>> >>>> Thanks, >>>> ______________________ >>>> Jose Barragan >>>> Senior Software Engineer >>>> Codeoscopic >>>> +34 912 94 80 80 >>>> http://www.codeoscopic.com >>>> >>>> On 30 Jun 2014, at 19:33, Alex Harui <aha...@adobe.com> wrote: >>>> >>>>> I put an early version of log file in my personal folder. For some >>>>>reason the line-endings aren't right but I'm out of time for now. >>>>>Uninstall your current version and try the one here: >>>>> >>>>> http://people.apache.org/~aharui/temp/ >>>>> >>>>> Use a terminal window and run it like this: >>>>> >>>>> /Applications/Apache\ Flex/Apache\ Flex\ SDK\ >>>>>Installer.app/Contents/MacOS/Apache\ Flex\ SDK\ Installer >>>>>-log=~/installlog.txt >>>>> >>>>> Thanks, >>>>> -Alex >>>>> ________________________________________ >>>>> From: Jose Barragan [jose.barra...@codeoscopic.com] >>>>> Sent: Monday, June 30, 2014 8:39 AM >>>>> To: dev@flex.apache.org >>>>> Subject: Re: [DISCUSS] Discuss Release Apache Flex SDK Installer 3.1 >>>>>- RC5 >>>>> >>>>> Hi Alex, >>>>> >>>>> The Installer disappear when it crashes... this log is incomplete, >>>>>because I could swear I reached to see appearing more lines, but I >>>>>didn't reach to catch them. >>>>> >>>>> We could include an physical export of installation log to a console >>>>>file or similar, for these cases, don't you think? >>>>> >>>>> [============LOG==============] >>>>> >>>>> Version 3.1.0 (mac) >>>>> Using Locale: en_ES >>>>> Fetched the SDK download mirror URL from the CGI. >>>>> AIR version 14.0 >>>>> Flash Player version 14.0 >>>>> Creating Apache Flex home >>>>> Creating temporary directory >>>>> Downloading Apache Flex SDK from: >>>>>https://dist.apache.org/repos/dist/dev/flex/sdk/4.13.0/rc2/binaries/ap >>>>>ache-flex-sdk-4.13.0-bin.tar.gz >>>>> downloading >>>>>https://dist.apache.org/repos/dist/dev/flex/sdk/4.13.0/rc2/binaries/ap >>>>>ache-flex-sdk-4.13.0-bin.tar.gz >>>>> not caching this download >>>>> Verifying Apache Flex SDK MD5 Signature >>>>> The Apache Flex SDK MD5 Signature of the downloaded files matches >>>>>the reference. The file is valid. >>>>> Uncompressing: >>>>>/Library/Flex/FlexSDK/4.13.0.RC2/temp/apache-flex-sdk-4.13.0-bin.tar.g >>>>>z >>>>> Finished uncompressing: >>>>>/Library/Flex/FlexSDK/4.13.0.RC2/temp/apache-flex-sdk-4.13.0-bin.tar.g >>>>>z >>>>> [get] Getting: >>>>>http://flex.apache.org/installer/properties/sdk/en_US.properties >>>>> [get] To: /Library/Flex/FlexSDK/4.13.0.RC2/en_US.properties >>>>> [IOErrorEvent type="ioError" bubbles=false cancelable=false >>>>>eventPhase=2 text="Error #2032" errorID=2032] >>>>> >>>>> get-data: >>>>> [get] Getting: >>>>>http://flex.apache.org/installer/sdk-installer-config-4.0.xml?ts=20140 >>>>>6300520 >>>>> [get] To: >>>>>/Library/Flex/FlexSDK/4.13.0.RC2/sdk-installer-config-4.0.xml >>>>> >>>>> get-air-md5-data: >>>>> >>>>> get-flash-md5-data: >>>>> >>>>> get-md5-data: >>>>> >>>>> check-binary: >>>>> >>>>> ask-air: >>>>> >>>>> ask-flash: >>>>> >>>>> ask-swfobject: >>>>> >>>>> ask-adobe-osmf: >>>>> >>>>> ask-adobe-fontswf: >>>>> >>>>> ask-adobe-blazeds: >>>>> >>>>> ask-licenses: >>>>> >>>>> ask-licenses: >>>>> >>>>> air-check: >>>>> >>>>> air-download: >>>>> [mkdir] Created dir: /Library/Flex/FlexSDK/4.13.0.RC2/in >>>>> >>>>> air-get-check: >>>>> >>>>> air-get: >>>>> Downloading Adobe AIR Runtime Kit for Mac from: >>>>>http://airdownload.adobe.com/air/mac/download/14.0//AdobeAIRSDK.tbz2 >>>>> >>>>> download_air: >>>>> >>>>> download_air_with_md5: >>>>> >>>>> check-cache: >>>>> >>>>> download_using_get: >>>>> >>>>> get-if-not-cached: >>>>> >>>>> check-params: >>>>> >>>>> get-with-no-params: >>>>> [get] Getting: >>>>>http://airdownload.adobe.com/air/mac/download/14.0//AdobeAIRSDK.tbz2?t >>>>>s=201406300520 >>>>> [get] To: /Library/Flex/FlexSDK/4.13.0.RC2/in/AdobeAIRSDK.tbz2 >>>>> >>>>> check-params: >>>>> >>>>> get-with-params: >>>>> >>>>> check-params: >>>>> >>>>> get-local: >>>>> >>>>> check-sum: >>>>> Validating download: >>>>>/Library/Flex/FlexSDK/4.13.0.RC2/in/AdobeAIRSDK.tbz2 >>>>> >>>>> put-in-cache: >>>>> >>>>> copy-if-cached: >>>>> >>>>> air-setup-win: >>>>> >>>>> air-setup-mac: >>>>> [mkdir] Created dir: /Library/Flex/FlexSDK/4.13.0.RC2/in/airsdk >>>>> [move] Moving 1 file to >>>>>/Library/Flex/FlexSDK/4.13.0.RC2/in/airsdk/AdobeAIRSDK.tbz2 >>>>> Finished untaring: >>>>>/Library/Flex/FlexSDK/4.13.0.RC2/in/airsdk/AdobeAIRSDK.tar >>>>> [delete] Deleting: /Library/Flex/FlexSDK/4.13.0.RC2/airtar.properties >>>>> >>>>> mac-copy-file: >>>>> [mkdir] Created dir: /Library/Flex/FlexSDK/4.13.0.RC2 >>>>> >>>>> mac-copy-file: >>>>> [mkdir] Created dir: /Library/Flex/FlexSDK/4.13.0.RC2 >>>>> >>>>> mac-copy-file: >>>>> [mkdir] Created dir: /Library/Flex/FlexSDK/4.13.0.RC2 >>>>> >>>>> mac-copy-file: >>>>> [mkdir] Created dir: /Library/Flex/FlexSDK/4.13.0.RC2/bin >>>>> >>>>> mac-copy-file: >>>>> [mkdir] Created dir: /Library/Flex/FlexSDK/4.13.0.RC2/bin >>>>> >>>>> mac-copy-file: >>>>> [mkdir] Created dir: /Library/Flex/FlexSDK/4.13.0.RC2/lib >>>>> >>>>> mac-copy-file: >>>>> [mkdir] Created dir: /Library/Flex/FlexSDK/4.13.0.RC2/samples >>>>> >>>>> mac-copy-dir: >>>>> [delete] Deleting: >>>>>/Library/Flex/FlexSDK/4.13.0.RC2/maccopy.properties >>>>> Copying files from >>>>>/Library/Flex/FlexSDK/4.13.0.RC2/in/airsdk/frameworks/libs/air to >>>>>/Library/Flex/FlexSDK/4.13.0.RC2/frameworks/libs >>>>> >>>>> mac-copy-dir: >>>>> [delete] Deleting: >>>>>/Library/Flex/FlexSDK/4.13.0.RC2/maccopy.properties >>>>> Copying files from >>>>>/Library/Flex/FlexSDK/4.13.0.RC2/in/airsdk/frameworks/projects/air to >>>>>/Library/Flex/FlexSDK/4.13.0.RC2/frameworks/projects >>>>> >>>>> mac-copy-dir: >>>>> [delete] Deleting: >>>>>/Library/Flex/FlexSDK/4.13.0.RC2/maccopy.properties >>>>> Copying files from >>>>>/Library/Flex/FlexSDK/4.13.0.RC2/in/airsdk/include to >>>>>/Library/Flex/FlexSDK/4.13.0.RC2 >>>>> >>>>> mac-check-exists: >>>>> >>>>> mac-copy-dir-if-exists: >>>>> >>>>> mac-copy-dir: >>>>> [delete] Deleting: >>>>>/Library/Flex/FlexSDK/4.13.0.RC2/maccopy.properties >>>>> Copying files from >>>>>/Library/Flex/FlexSDK/4.13.0.RC2/in/airsdk/lib/android to >>>>>/Library/Flex/FlexSDK/4.13.0.RC2/lib >>>>> >>>>> mac-copy-dir: >>>>> [delete] Deleting: >>>>>/Library/Flex/FlexSDK/4.13.0.RC2/maccopy.properties >>>>> Copying files from >>>>>/Library/Flex/FlexSDK/4.13.0.RC2/in/airsdk/lib/aot to >>>>>/Library/Flex/FlexSDK/4.13.0.RC2/lib >>>>> >>>>> (…) >>>>> >>>>> [============LOG==============] >>>>> >>>>> ______________________ >>>>> Jose Barragan >>>>> Senior Software Engineer >>>>> Codeoscopic >>>>> +34 912 94 80 80 >>>>> http://www.codeoscopic.com >>>>> >>>>> On 30 Jun 2014, at 16:55, Alex Harui <aha...@adobe.com> wrote: >>>>> >>>>>> Do you have time to try again with verbose logging and try to keep >>>>>>the log window open and scrolled to the bottom so we can try to find >>>>>>out what it was doing when it crashed? >>>>>> >>>>>> Thanks, >>>>>> -Alex >>>>>> ________________________________________ >>>>>> From: Jose Barragan [jose.barra...@codeoscopic.com] >>>>>> Sent: Monday, June 30, 2014 3:59 AM >>>>>> To: dev@flex.apache.org >>>>>> Subject: Re: [DISCUSS] Discuss Release Apache Flex SDK Installer >>>>>>3.1 - RC5 >>>>>> >>>>>> Hi, testing the new Installer I got an exception when tried to >>>>>>install the 4.13.0 RC2 FDK but doesn’t happened when installing >>>>>>4.12.1 ... >>>>>> >>>>>> Process: Apache Flex SDK Installer [5570] >>>>>> Path: /Applications/Apache Flex/Apache Flex SDK >>>>>>Installer.app/Contents/MacOS/Apache Flex SDK Installer >>>>>> Identifier: org.apache.flex.installapacheflex >>>>>> Version: 3.1.0 (???) >>>>>> Code Type: X86 (Native) >>>>>> Parent Process: launchd [277] >>>>>> Responsible: Apache Flex SDK Installer [5570] >>>>>> User ID: 501 >>>>>> >>>>>> Date/Time: 2014-06-30 12:43:37.045 +0200 >>>>>> OS Version: Mac OS X 10.9.3 (13D65) >>>>>> Report Version: 11 >>>>>> Anonymous UUID: 74662061-F9E9-E13F-709F-F0DD028953BA >>>>>> >>>>>> >>>>>> Crashed Thread: 9 com.apple.NSURLConnectionLoader >>>>>> >>>>>> Exception Type: EXC_CRASH (SIGABRT) >>>>>> Exception Codes: 0x0000000000000000, 0x0000000000000000 >>>>>> >>>>>> Application Specific Information: >>>>>> terminating with uncaught exception of type Security::UnixError: >>>>>>UNIX error exception >>>>>> abort() called >>>>>> >>>>>> >>>>>> >>>>>> anybody knows something about that? >>>>>> ______________________ >>>>>> Jose Barragan >>>>>> Senior Software Engineer >>>>>> Codeoscopic >>>>>> +34 912 94 80 80 >>>>>> http://www.codeoscopic.com >>>>>> >>>>>> On 29 Jun 2014, at 07:53, Alex Harui <aha...@adobe.com> wrote: >>>>>> >>>>>>> That's great to hear. >>>>>>> >>>>>>> On 6/28/14 9:34 PM, "周 戈" <darkst...@163.com> wrote: >>>>>>> >>>>>>>> Hi Alex, >>>>>>>> >>>>>>>> I’ve tested Flex SDK Installer 3.1 RC5: >>>>>>>> >>>>>>>> Flex 4.13.0 RC2 + AIR 14 + FP 14 - Installation Completed >>>>>>>>Successfully in >>>>>>>> the 1st run. >>>>>>>> >>>>>>>> FlexJS 0.0.2 RC2 + AIR 14 + FP 14 - Installation Completed >>>>>>>>Successfully >>>>>>>> in the 4th run (previous 3 runs failed when downloading Apache >>>>>>>>Flex SDK, >>>>>>>> guess it’s the mirror server connection problem). >>>>>>>> >>>>>>>> The Chinese Translations are perfect, even the [Copy Log] button >>>>>>>>is >>>>>>>> translated in Chinese, very nice! >>>>>>>> >>>>>>>> I think it’s good enough to make a release version of the Flex SDK >>>>>>>> Installer now, based on the installation results. >>>>>>>> >>>>>>>> >>>>>>>> DarkStone >>>>>>>> 2014-06-29 >>>>>>>> >>>>>>>> 在 2014-06-28，00:59，Alex Harui <aha...@adobe.com> 写道： >>>>>>>> >>>>>>>>> This is the discuss thread. >>>>>>>>> >>>>>>>>> I built the binaries against AIR 14 (not the beta, since it is a >>>>>>>>>beta). >>>>>>>>> >>>>>>>>> Besides the latest LICENSE and NOTICE, I also added logging >>>>>>>>>locale >>>>>>>>> changes >>>>>>>>> and localization of the COPY LOG button. >>>>>>>>> >>>>>>>>> Changes are minor so votes carry over. >>>>>>>>> >>>>>>>>> -Alex >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >
