I did see a gui tool, that built a fusebox type model, and chould target php, cf etc. Don't know if you chould feed it code and retarget the output.
Can remember the name off the top of my head, but its on the fusebox site somewhere. Justin > -----Original Message----- > From: Paul Johnston [mailto:[EMAIL PROTECTED]] > Sent: 06 January 2003 14:53 > To: [EMAIL PROTECTED] > Subject: RE: [ cf-dev ] OT: CF to PHP > > > > I asked/looked about something like this before, put I didn't > > find anything. I'd decided that something that did a half > > arsed job of it would take nearly as much time as rewriting. > > You'll have to bite the bullet... > > Thanks for that. > > Easy enough now I've taken an hour over it. The fact that there's a PHP > version of fusebox also means I don't have to think about > recoding stuff too > much either! It's pretty much a syntax change and that's all! Thanks > again! > > Paul > > > > > -- > ** Archive: http://www.mail-archive.com/dev%40lists.cfdeveloper.co.uk/ > > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > For human help, e-mail: [EMAIL PROTECTED] > > > > -- ** Archive: http://www.mail-archive.com/dev%40lists.cfdeveloper.co.uk/ To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] For human help, e-mail: [EMAIL PROTECTED]
