> of course if there was something like an application.cfm in > PHP then I'd be laughing - is there?
If you're using apache try sticking the following in an .htaccess file (or within the appropriate virtual host section of httpd.conf): php_value auto_prepend_file /full/path/to/Application.php That will mimic the behaviour of Application.cfm. There is also a similar ini directive called "auto_append_file" which will act like OnRequestEnd.cfm. For more info on the sort of things you can set in this way check out the following: http://uk.php.net/ini_set http://uk.php.net/configuration HTH, Tim. ------------------------------------------------------- RAWNET LTD - Internet, New Media and ebusiness Gurus. Visit our new website at http://www.rawnet.com for more information about our company, or call us free anytime on 0800 294 24 24. ------------------------------------------------------- Tim Blair Web Application Engineer, Rawnet Limited Direct Phone : +44 (0) 1344 393 441 Switchboard : +44 (0) 1344 393 040 ------------------------------------------------------- This message may contain information which is legally privileged and/or confidential. If you are not the intended recipient, you are hereby notified that any unauthorised disclosure, copying, distribution or use of this information is strictly prohibited. Such notification notwithstanding, any comments, opinions, information or conclusions expressed in this message are those of the originator, not of rawnet limited, unless otherwise explicitly and independently indicated by an authorised representative of rawnet limited. ------------------------------------------------------- -- ** Archive: http://www.mail-archive.com/dev%40lists.cfdeveloper.co.uk/ To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] For human help, e-mail: [EMAIL PROTECTED]
