Thank you, David, It's good to have a working example.
Regarding the existing ADC code, I realized that I had only diffed over the various LPCxxx drivers. My current starting point is the LPC driver with things picked from the STM32. The LPC driver is simpler (STM32 handles many variants), while the STM32 driver has a clearer multi-ADC and multi-channel structure (although I just realized that mask in the LPC driver might be the channel selector). Just writing this here in case someone wants to point me in another direction. BR Thomas -----Original Message----- From: David Sidrane <david.sidr...@nscdg.com> Sent: den 15 september 2020 12:15 To: dev@nuttx.apache.org Subject: RE: i.MX RT 1060 ADC Hi Thomas, If you structure the driver like any of the other ADC drivers in tree you should be able to reference px4_arch_adc_init and px4_arch_adc_sample from https://github.com/PX4/Firmware/blob/master/platforms/nuttx/src/px4/nxp/im xrt/adc/adc.cpp to get the required logic. To fill in the meat, but you will have to do it in nuttx style using the {get|set}reg32 calls. David -----Original Message----- From: Thomas Axelsson [mailto:thomas.axels...@actia.se] Sent: Tuesday, September 15, 2020 2:55 AM To: dev@nuttx.apache.org Subject: i.MX RT 1060 ADC Hi, I'm looking into using the ADC on IMXRT 1060. I have found imxrt_adc.h and some examples in nuttx-apps using /dev/adcXX. However, it seems that the actual functionality is not yet implemented for IMXRT. So I'm looking into implementing this driver, based on e.g. lpc17_40_adc.c (diffing all *_adc.c files turned up almost no differences). I tried grepping for some register names to see if the IP block is already implemented for another chip, but without luck. I'm sending this e-mail to see if someone else is already working on the same thing. I did see that imxrt_adc.h has gotten some updates. Thomas Axelsson SW Developer ACTIA Nordic AB (part of ACTIA Group) Mail: thomas.axels...@actia.se<mailto:thomas.axels...@actia.se> Web: www.actia.se<http://www.actia.se/>
