Posting the config in question: # # This file is autogenerated: PLEASE DO NOT EDIT IT. # # You can use "make menuconfig" to make any modifications to the installed .config file. # You can then do "make savedefconfig" to generate a new defconfig file that includes your # modifications. # # CONFIG_ARCH_LEDS is not set # CONFIG_DEV_CONSOLE is not set # CONFIG_DISABLE_OS_API is not set CONFIG_ALLOW_BSD_COMPONENTS=y CONFIG_ALLOW_MIT_COMPONENTS=y CONFIG_ARCH="arm" CONFIG_ARCH_BOARD="CM_TM4C" CONFIG_ARCH_BOARD_CM_TM4C=y CONFIG_ARCH_CHIP="tiva" CONFIG_ARCH_CHIP_TIVA=y CONFIG_ARCH_CHIP_TM4C129=y CONFIG_ARCH_CHIP_TM4C129ENCPDT=y CONFIG_ARCH_CHIP_TM4C=y CONFIG_ARCH_HIPRI_INTERRUPT=y CONFIG_ARCH_RAMVECTORS=y CONFIG_ARCH_STACKDUMP=y CONFIG_ARMV7M_LIBM=y CONFIG_ARMV7M_MEMCPY=y CONFIG_BOARDCTL_IOCTL=y CONFIG_BOARD_LATE_INITIALIZE=y CONFIG_BOARD_LOOPSPERMSEC=11401 CONFIG_BUILTIN=y CONFIG_DEBUG_ERROR=y CONFIG_DEBUG_FEATURES=y CONFIG_DEBUG_INFO=y CONFIG_DEBUG_SYMBOLS=y CONFIG_DEBUG_WARN=y CONFIG_DEV_GPIO=y CONFIG_DEV_GPIO_NSIGNALS=0 CONFIG_FS_PROCFS=y CONFIG_INIT_ENTRYPOINT="nsh_main" CONFIG_LIBM=y CONFIG_NET=y CONFIG_NETDB_DNSCLIENT=y CONFIG_NETINIT_DHCPC=y CONFIG_NETINIT_THREAD=y CONFIG_NETINIT_THREAD_PRIORITY=120 CONFIG_NETUTILS_DHCPC_HOST_NAME="nuttx-cm" CONFIG_NETUTILS_NETCAT=y CONFIG_NETUTILS_TELNETD=y CONFIG_NET_ARP_IPIN=y CONFIG_NET_ARP_SEND=y CONFIG_NET_BROADCAST=y CONFIG_NET_ETH_PKTSIZE=1518 CONFIG_NET_ICMP=y CONFIG_NET_ICMP_SOCKET=y CONFIG_NET_ROUTE=y CONFIG_NET_STATISTICS=y CONFIG_NET_TCP=y CONFIG_NET_TCPBACKLOG=y CONFIG_NET_TCP_WRITE_BUFFERS=y CONFIG_NET_UDP=y CONFIG_NET_UDP_CHECKSUMS=y CONFIG_NET_UDP_NOTIFIER=y CONFIG_NET_UDP_WRITE_BUFFERS=y CONFIG_NSH_BUILTIN_APPS=y CONFIG_PREALLOC_MQ_MSGS=4 CONFIG_PREALLOC_TIMERS=4 CONFIG_RAM_SIZE=262144 CONFIG_RAM_START=0x20000000 CONFIG_RAW_BINARY=y CONFIG_RR_INTERVAL=200 CONFIG_SCHED_HPWORK=y CONFIG_SCHED_LPWORK=y CONFIG_SCHED_WAITPID=y CONFIG_SERIAL_TERMIOS=y CONFIG_STACK_CANARIES=y CONFIG_STACK_COLORATION=y CONFIG_START_YEAR=2015 CONFIG_SYSTEM_DHCPC_RENEW=y CONFIG_SYSTEM_NSH=y CONFIG_SYSTEM_PING=y CONFIG_TESTING_OSTEST=y CONFIG_TESTING_OSTEST_LOOPS=0 CONFIG_TIVA_BOARDMAC=y CONFIG_TIVA_ETHERNET=y CONFIG_TIVA_UART2=y CONFIG_TIVA_UART_BREAKS=y CONFIG_UART2_BAUD=9600 CONFIG_USERLED=y CONFIG_USERLED_LOWER=y
On Mon, Feb 13, 2023 at 9:34 AM Nathan Hartman <hartman.nat...@gmail.com> wrote: > > Finally I have a chance to look at this again. > > If I have CONFIG_NSH_CLE, the board boots, gets a DHCP lease, and > responds to telnet, but with that ^[[62;6R business... and doesn't > seem to function much beyond that. > > If I have CONFIG_NSH_READLINE instead (the two options are mutually > exclusive, right?), the board does *not* get a DHCP lease and I can't > locate it on the network, let alone try to telnet to it. > > I'm single-stepping through the NSH initialization to see where things > are taking a wrong turn... > > Nathan > > On Fri, Feb 10, 2023 at 4:31 PM Gregory Nutt <spudan...@gmail.com> wrote: > > > > On 2/10/2023 3:19 PM, Nathan Hartman wrote: > > > You know what, I think that might be it. I think I did notice that CLE was > > > enabled and didn't think about it. Let me look into it... > > > > Even if that is the case, it is still and error if the escape sequence > > from the host appears on the NSH console. It should be completely > > consumed by the function cle_getcursor() at line 479 of > > apps/system/cle/cle.c > > > >
