Hi, I'll take a look at it soon. Interestingly, our internal CI tests all the defconfigs, so I wouldn't expect any erroneous behavior.
I'll check. Best regards, Em ter., 29 de ago. de 2023 às 16:38, Mike Moretti <nu...@mordent.com.invalid> escreveu: > Hi, > > I'm using NuttX 12.2.1 on an esp32 wroom devkit. > > If I try to configure NuttX via tools/configure.sh using the > esp32-devkitc:blewifi configuration, when I boot the esp32, I get problems > with it telling me there's no bootable app. > > If I instead start with the esp32-devkitc:nsh configuration and add wifi > and ble to it via menuconfig, I get only a little further. It gets past > the entropy message and then I see "AB" and it hangs forever. With all the > ble options disabled and only wifi configured by itself it actually boots > into nsh after some time. (At first, I had a somewhat similar issue with > nsh when wifi only is enabled and connection info wasn't defined in the > config file, where it would seem to hang and then finally show a prompt. > It wasn't until I actually figured out about turning on CONFIG_DEBUG > "ERROR" for network/wireless that it showed me a bunch of errors during > boot and I knew it wasn't just hanging permanently and to just wait for it > a bit to show an nsh prompt.) > > However, there don't seem to be any config debug options for bluetooth. I > have no idea why it hangs as no messages are displayed and it never shows a > prompt even after a half an hour. I've now spent hours messing with > various BLE configuration options with no luck. I'm including my config > file in hope that someone might see something wrong with it. > > Thanks, > -m > -- > Mike Moretti > ♩♫♫♩♪♩ > -- Tiago Medicci Serrano Embedded Software Engineer MSc Electronics/Microelectronics m: +55 (19) 981403886 <+55+(19)+981403886> e: tiago.medi...@gmail.com a: Campinas, Brazil Follow me: <https://www.linkedin.com/in/tiago-serrano-924458b6> <https://github.com/tmedicci>
