Yes, there is certainly stuff to investigate. My latest failure is:
/usr/bin/cp: missing destination file operand after
'/cygdrive/c/OpenOfficeDev/Trunk/main/solver/420/wntmsci12.pro/lib/isvl.lib'
Try '/usr/bin/cp --help' for more information.
C:/OpenOfficeDev/Trunk/main/solenv/gbuild/StaticLibrary.mk:45: recipe
for target
'/cygdrive/c/OpenOfficeDev/Trunk/main/solver/420/wntmsci12.pro/lib/isvl.lib'
failed
make: ***
[/cygdrive/c/OpenOfficeDev/Trunk/main/solver/420/wntmsci12.pro/lib/isvl.lib]
Error 1
dmake: Error code 2, while making 'all'
1 module(s):
xmloff
need(s) to be rebuilt
Reason(s):
ERROR: error 65280 occurred while making
/cygdrive/c/OpenOfficeDev/Trunk/main/xmloff/prj
When you have fixed the errors in that module you can resume the build
by running:
build --all:xmloff
On 2/3/2016 3:33 AM, Damjan Jovanovic wrote:
main/oox/prj/build.lst already lists xmlscript as a dependency, so "build"
should have built it before starting to build oox. Something must be very
wrong for it not to.
On Wed, Feb 3, 2016 at 1:28 PM, Patricia Shanahan <p...@acm.org> wrote:
Yes, thanks. At least, it gets past oox.
So one trick for a missing file is to explicitly build and deliver in the
directory the file should have come from.
Later, I may do a new build from a clean check-out, and try to investigate
anomalies. Right now, my objective is to just get it built.
On 2/3/2016 3:19 AM, Damjan Jovanovic wrote:
That is strange. Does it work if you first do "build" and "deliver" in
main/xmlscript?
On Wed, Feb 3, 2016 at 1:07 PM, Patricia Shanahan <p...@acm.org> wrote:
I am now getting to:
Compiling: oox/source/ole/vbacontrol.cxx
C:/OpenOfficeDev/Trunk/main/oox/source/ole/vbacontrol.cxx(34) : fatal
error C1083: Cannot open include file: 'xmlscript/xmldlg_imexp.hxx': No
such file or directory
dmake: Error code 2, while making '../../
wntmsci12.pro/slo/vbacontrol.obj
'
1 module(s):
oox
need(s) to be rebuilt
Reason(s):
ERROR: error 65280 occurred while making
/cygdrive/c/OpenOfficeDev/Trunk/main/oox/source/ole
On 2/2/2016 9:33 PM, Patricia Shanahan wrote:
python had apparently not been built. I don't know why. I was able to
get the build going again with "build --all:python".
It is now making progress, but from time-to-time I get this sort of
failure:
======================================================================
c:/OpenOfficeDev/Trunk/main/svl/source/numbers/zformat.cxx(25) : fatal
error C1859:
'c:/OpenOfficeDev/Trunk/main/solver/420/
wntmsci12.pro/workdir/PrecompiledHeader/nodebug/precompiled_svl.hxx.pch
'
unexpected precompiled header error, simply rerunning the compiler might
fix this problem
C:/OpenOfficeDev/Trunk/main/solenv/gbuild/LinkTarget.mk:126: recipe for
target
'/cygdrive/c/OpenOfficeDev/Trunk/main/solver/420/
wntmsci12.pro/workdir/CxxObject/svl/source/numbers/zformat.o'
failed
make: ***
[/cygdrive/c/OpenOfficeDev/Trunk/main/solver/420/
wntmsci12.pro/workdir/CxxObject/svl/source/numbers/zformat.o]
Error 2
dmake: Error code 2, while making 'all'
1 module(s):
svl
need(s) to be rebuilt
Reason(s):
ERROR: error 65280 occurred while making
/cygdrive/c/OpenOfficeDev/Trunk/main/svl/prj
When you have fixed the errors in that module you can resume the build
by running:
build --all:svl
======================================================================
The build system knows the failure is potentially retriable. It tells me
exactly what to type to do the retry. WHY can't it just retry itself,
without needing my fingers on the keyboard?
On 2/2/2016 8:10 AM, Patricia Shanahan wrote:
OpenGrok looks and sounds like something I should learn about.
I think my next step is to look into the state of python. Matters may
have been complicated because I did a "dmake clean" after changing my
configure parameters to use a 32 bit JDK, before continuing the steps
from configure on.
There may be a pause - I have some non-programming stuff to do today
and
tomorrow morning.
Thanks for all the help. Posting immediately on hitting a problem is
definitely getting faster progress than when I tried to puzzle things
out for myself first.
On 2/2/2016 6:39 AM, Damjan Jovanovic wrote:
OpenGrok[1] tells me the pyversion.mk file is in main/python; through
building it would get delivered to main/solver/... and found by pyuno.
Did
python not build before pyuno did? pyuno/prj/build.lst lists a
dependency
on python when PYTHON is defined[2]:
bgpu pyuno : stoc cpputools cppuhelper bridges tools
PYTHON:python
LIBXSLT:libxslt NULL
but earlier you posted your config.log which had this in it:
PYTHON=''
and I am not sure whether that's enough. If the problem is that the
python
module isn't getting built first, you can force it to build first
through
one of these hacks:
* delete the "PYTHON:" prefix to "python" from the build.lst line
* manually building python before resuming the build:
cd main/python
build
deliver
cd ../instsetoo_native
build --all -P2 -- -P2
References:
[1]
http://opengrok.adfinis-sygroup.org/source/search?q=&defs=&refs=&path=pyversion.mk&hist=&project=aoo-trunk
[2]
http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/pyuno/prj/build.lst
On Tue, Feb 2, 2016 at 4:21 PM, Patricia Shanahan <p...@acm.org>
wrote:
Thanks. Now I get to:
=============
Building module pyuno
=============
Entering /cygdrive/c/OpenOfficeDev/Trunk/main/pyuno/source/module
mkout -- version: 1.8
dmake: makefile.mk: line 56: Error: -- Include file pyversion.mk,
not
found
On 2/2/2016 4:18 AM, Damjan Jovanovic wrote:
For me, main/icu fails to build on Windows about 50% of the time
for no
apparent reason; I've begun to think it's some sort of build race
condition
within that module. I haven't seen the buildbots fail there, and
nobody
else has reported this problem.
If this is your problem, the only fix I know is the following hack:
cd main/icu
then keep cleaning and rebuilding it until it builds successfully:
rm -rf wntmsci12.pro
one of: dmake / build -P2 / build -- -P2 / build -P2 -- -P2
then when it does, continue as before:
cd ../instsetoo_native
build --all -P2 -- -P2
On Tue, Feb 2, 2016 at 2:00 PM, Patricia Shanahan <p...@acm.org>
wrote:
Good. My latest error is:
NMAKE : fatal error U1073: don't know how to make
'".\..\..\lib\icuin.lib"'
Stop.
NMAKE : fatal error U1077:
'C:\PROGRA~2\MICROS~1.0\VC\bin\nmake.exe' :
return code '0x2'
Stop.
dmake: Error code 2, while making './
wntmsci12.pro/misc/build/so_built_so_icu'
I am hoping after this is all done to add a section on gotchas and
their
symptoms to the step-by-step guide. That may save future new
developers
some time.
On 2/2/2016 3:32 AM, Damjan Jovanovic wrote:
I've documented this gotcha on both
https://wiki.openoffice.org/wiki/Documentation/Building_Guide_AOO/Step_by_step
and
https://wiki.openoffice.org/wiki/Documentation/Building_Guide_AOO
On Tue, Feb 2, 2016 at 10:29 AM, Patricia Shanahan <p...@acm.org>
wrote:
Thanks.
On 2/1/2016 11:50 PM, Damjan Jovanovic wrote:
According to
http://stackoverflow.com/questions/19641685/java-jni-jawt-error-unresolved-external-symbol-imp-jawt-getawt8
you're using a 64 bit JDK instead of a 32 bit one.
On Tue, Feb 2, 2016 at 9:40 AM, Patricia Shanahan <p...@acm.org
wrote:
After checking out with Cygwin's svn rather than TortoiseSVN, my
build
failed in "Building module bean" with the following message:
Creating library
../../wntmsci12.pro/lib/iofficebean_t1.lib
and
object
../../wntmsci12.pro/lib/iofficebean_t1.exp
officebean.lib(com_sun_star_comp_beans_LocalOfficeWindow.obj) :
error
LNK2019: unresolved external symbol __imp__JAWT_GetAWT@8
referenced
in
function
_Java_com_sun_star_comp_beans_LocalOfficeWindow_getNativeWindow@8
../../wntmsci12.pro/bin/officebean.dll : fatal error LNK1120:
1
unresolved externals
dmake: Error code 96, while making '../../
wntmsci12.pro/bin/officebean.dll'
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
For additional commands, e-mail:
dev-h...@openoffice.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
For additional commands, e-mail: dev-h...@openoffice.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
For additional commands, e-mail: dev-h...@openoffice.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
For additional commands, e-mail: dev-h...@openoffice.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
For additional commands, e-mail: dev-h...@openoffice.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
For additional commands, e-mail: dev-h...@openoffice.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
For additional commands, e-mail: dev-h...@openoffice.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
For additional commands, e-mail: dev-h...@openoffice.apache.org
