Hi Julian, I agree, we should still ship it. I mean I know that there are issues. We couldn't have gotten everything right. And incubating releases don't have to be perfect.
I would say we start releasing more regularly and simply fix the things we found and fixed in the next 0.2.0 release. We're not yet using real semver. I'll think we leave that to version 1.0.0. Chris Outlook for Android<https://aka.ms/ghei36> herunterladen ________________________________ From: Julian Feinauer <[email protected]> Sent: Wednesday, September 26, 2018 4:08:50 AM To: [email protected] Subject: Re: [VOTE] Apache PLC4X (Incubating) 0.1.0 RC2 Hi Andreas, thank you very much for your support (as I know to few about TIA programming to do it myself with our PLC here). I will try to dig into some of them the end of this or next week (if chris doesn’t do it first : )). I suggest to get the release going none the less (I think this is the usual way) and have a bugfix release soon (0.1.1) where such things are fixed. @chris: How is the procedure for hotfix releases (in semVer)? Always the same procedure? Julian Am 25.09.18, 14:12 schrieb "Uschold Andreas" <[email protected]>: I just did some tests with the S7 driver and found a couple of issues. PLC4X-56 [S7] S7Field does not recognize addresses with numElements present PLC4X-57 [S7] Response for address with numElements contains only first item PLC4X-58 [S7] Reading more then PDU with one request blocks calling thread indefinitly PLC4X-59 [S7] Reading a UDINT with value 0x00000000 and non positive floating point values does not work I found these issues while testing exotic / exceptional constellations, so for "normal" use cases they are probably not an issue. Andreas -----Ursprüngliche Nachricht----- Von: Julian Feinauer [mailto:[email protected]] Gesendet: Montag, 24. September 2018 21:04 An: [email protected] Betreff: [EXT] Re: [VOTE] Apache PLC4X (Incubating) 0.1.0 RC2 +1 (contributor) Checks and build performed on Mac OS X. Checks performed: - Checked out using the new tooling: OK - Checked signatures: OK - Checked the zip correctly unpacks to the expected directory structure: OK - verify the existence of DISCLAIMER, LICENSE, NOTICE, README, RELEASE_NOTES: OK - Built from sources (including tests) according to instructions in README: OK - All tests pass: OK Julian Am 24.09.18, 16:39 schrieb "Stefan Bodewig" <[email protected]>: On 2018-09-22, Christofer Dutz wrote: > Apache PLC4X (Incubating) 0.1.0 RC2 has been staged under [2] and it’s > time to vote on accepting it for release. All Maven artifacts are > available under [1]. If approved we will seek final release approval > from the IPMC. Voting will be open for 72hr. +1 I've got some questions (see other-thread) but nothing that would invalidate the RC. Stefan
