Hi Chris, sry for joining so late.
What speeks against a OPC UA Server as PLC-Mok. It is not a big deal to implement it with Milo and provides a function complete OPC UA Server implementation. I Know it is not a real PLC and has no RT Cycles which restricts the possible communication. But I do not know if such a technical deep simulation is the right thing for the IT-guys and for the OT guys there is in my opinion no gain without pain 😃 For that I would agree with @Lukas Ott and rather cooperate with some existing solutions and add there a nice setup/starter guide which can also be used by the IT beginners? Gereetings Matthias Strljic, M.Sc. Universität Stuttgart Institut für Steuerungstechnik der Werkzeugmaschinen und Fertigungseinrichtungen (ISW) Seidenstraße 36 70174 Stuttgart GERMANY Tel: +49 711 685-84530 Fax: +49 711 685-74530 E-Mail: matthias.strl...@isw.uni-stuttgart.de Web: http://www.isw.uni-stuttgart.de -----Ursprüngliche Nachricht----- Von: Christofer Dutz <christofer.d...@c-ware.de> Gesendet: Wednesday, October 16, 2019 9:38 AM An: dev@plc4x.apache.org Betreff: Re: [PLC-Simulator] Thoughts on the "Context" for our simulator Hi Lukas, my colleagues here at codecentric recently did some searching for simulated PLCs. They were writing a blog post about the PLC4X Logstash integration and needed something to produce test-data. To make it short: They were very unhappy with what they found. In the end I think they used some opc-ua simulator. For some you needed to actually write projects for the PLC with for example TIA as they simulate being a real PLC ;-) Most of them simulate being PLCs but lack the communication options (Most of them only support Modbus and OPC-UA) If I look at the open-plc thingy you reference ... that is good to learn to program PLCs. The editor looks as if you could learn this (from a IT developer's point of view) little strange way of writing programs for PLCs. From the documentation it only supports Modbus. We want to build something to help learn writing PLC4X software, not to write software running on PLCs ... especially to learn writing software for the different protocols PLC4X supports. Perhaps "PLC simulator" is sort of a bad name as we wouldn't even try simulate being a real PLC. It's more intended to be a mock PLC for training purposes. So I was hoping to have multiple protocol servers running on multiple fixed simulations and writing how-tos and perhaps even videos and Trainings on how to use PLC4X based on these very fixed scenarios but using varying protocols. I think this is what I currently hear most as being the missing piece of getting started with PLC4X. And I found out that it's a mega-awesome testcase for our generated drivers :-) Being able to use the old hand written drivers to communicate with the generated servers already helped with getting the generated s7 driver into shape Chris Am 16.10.19, 08:16 schrieb "Lukas Ott" <ott.lukas...@gmail.com>: Hi all, That would fit to https://www.openplcproject.com/ as the Runtime is using MODBUS.... Maybe ask https://github.com/thiagoralves if we just could with his https://www.openplcproject.com/plcopen-editor ? The major question is it easier to collaborate and leverage the project? or check the relevant licences and work together? Lukas Am Mi., 16. Okt. 2019 um 07:46 Uhr schrieb Christofer Dutz < christofer.d...@c-ware.de>: > Hi Cesar, > > No they wouldn't. They would be exposed to the server implementation and > the ui. > > The thing is that the above structure s7 could probably automatically > translate into s7 addresses. However for Modbus an explicit mapping is > required (sort of mirroring reality with real plcs). > > I was thinking that perhaps the server/protocol would provide the means to > map the context into their address space (extra editor) and that the ui for > displaying the current context values, could have a column per installed > server, with plc4x addresses for addressing these resources. > > Just me brainstorming.... > > Chris > > Holen Sie sich Outlook für Android<https://aka.ms/ghei36> > > ________________________________ > From: Cesar Garcia <cesar.gar...@ceos.com.ve> > Sent: Wednesday, October 16, 2019 4:44:30 AM > To: Apache PLC4X <dev@plc4x.apache.org> > Subject: Re: [PLC-Simulator] Thoughts on the "Context" for our simulator > > Hi Christofer, > > How would these data structures be exposed to the user? An API? Or a > service? > > A simple way to see it would be to have the PLC data structures (DB, PEW, > M, etc.) as instances of ByteBuf from the Netty library. > > Best regards, > > El mar., 15 oct. 2019 a las 8:55, Christofer Dutz (< > christofer.d...@c-ware.de>) escribió: > > > Hi all, > > > > While implementing the S7Server part I noticed that my HelloPlc4x config > > is always set to get the values of the inputs and the outputs and not the > > internal memory of the S7 > > > > So this got me thinking … just having a Map<String, Object> as context > > might not be enough to really play around. > > > > For a S7 I would assume a context should be: > > > > * Map<String, Object> (Sorted map with an explicit order such as a > > TreeMap) > > * List<Input<Boolean>> (Digital Inputs) > > * List<Input<Long>> (Analog Inputs) > > * List<Output<Boolean>> (Digital Outputs) > > * List<Output<Long>> (Analog Outputs) > > > > Should this be enough for a somewhat realistic simulation? > > > > I know for Modbus there is not automatic mapping of any form of context & > > IO to the Modbus Coils (Boolean) and Registers (Short) > > But for the rest I do think that a PLC has the concept of an input and > > output and these in flavors: Analog and Digital. > > > > I know that my PLC knowledge is somewhat theoretical. You guys at least > > some of you work with them every day. So I would appreciate your input. > > > > Chris > > > > > -- > *CEOS Automatización, C.A.* > *GALPON SERVICIO INDUSTRIALES Y NAVALES FA, C.A.,* > *PISO 1, OFICINA 2, AV. RAUL LEONI, SECTOR GUAMACHITO,* > > *FRENTE A LA ASOCIACION DE GANADEROS,BARCELONA,EDO. ANZOATEGUI* > *Ing. César García* > *Cel: 0416-681.03.99* > > *Cel: 0414-760.98.95* > > *Hotline Técnica SIEMENS: 0800 1005080* > > *Email: support.aan.automat...@siemens.com > <support.aan.automat...@siemens.com>* >
