When both the PEI and DXE phases operate in the same execution
mode(32-bit/64-bit), the BSP send a special start-up signal during
the DXE phase to awaken the Application APs.
To eliminate the need for the INIT-SIPI-SIPI sequence at the beginning
of the DXE phase, the BSP call the SwitchApContext function to trigger
the special start-up signal. By writing the specified
StartupSignalValue to the designated StartupSignalAddress, the BSP
wakes up the APs from mwait mode. Once the APs receive the
MP_HAND_OFF_SIGNAL value, they are awakened and proceed to execute the
SwitchContextPerAp procedure. They enter another while loop,
transitioning their context from the PEI phase to the DXE phase.
The original state transitions for an AP during the procedure are as
follows:
Idle ----> Ready ----> Busy ----> Idle
[BSP] [AP] [AP]
Instead of init-sipi-sipi sequence, we make use of a
start-up signal to awaken the APs and transfer their context from
PEI to DXE. Consequently, APs, rather than the BSP, to set their state
to CpuStateReady.
Cc: Gerd Hoffmann <kra...@redhat.com>
Cc: Eric Dong <eric.d...@intel.com>
Cc: Ray Ni <ray...@intel.com>
Cc: Rahul Kumar <rahul1.ku...@intel.com>
Cc: Tom Lendacky <thomas.lenda...@amd.com>
Signed-off-by: Yuanhao Xie <yuanhao....@intel.com>
---
UefiCpuPkg/Library/MpInitLib/MpLib.c | 130
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
UefiCpuPkg/Library/MpInitLib/MpLib.h | 8 ++++++++
2 files changed, 138 insertions(+)
diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.c
b/UefiCpuPkg/Library/MpInitLib/MpLib.c
index e56f2455dc..325710b442 100644
--- a/UefiCpuPkg/Library/MpInitLib/MpLib.c
+++ b/UefiCpuPkg/Library/MpInitLib/MpLib.c
@@ -729,6 +729,7 @@ ApWakeupFunction (
UINT64 ApTopOfStack;
UINTN CurrentApicMode;
AP_STACK_DATA *ApStackData;
+ UINT32 OriginalValue;
//
// AP's local APIC settings will be lost after received INIT IPI
@@ -769,6 +770,15 @@ ApWakeupFunction (
// Clear AP start-up signal when AP waken up
//
ApStartupSignalBuffer =
CpuMpData->CpuData[ProcessorNumber].StartupApSignal;
+ OriginalValue = InterlockedCompareExchange32 (
+ (UINT32 *)ApStartupSignalBuffer,
+ MP_HAND_OFF_SIGNAL,
+ 0
+ );
+ if (OriginalValue == MP_HAND_OFF_SIGNAL) {
+ SetApState (&CpuMpData->CpuData[ProcessorNumber], CpuStateReady);
+ }
+
InterlockedCompareExchange32 (
(UINT32 *)ApStartupSignalBuffer,
WAKEUP_AP_SIGNAL,
@@ -887,6 +897,31 @@ ApWakeupFunction (
}
}
+/**
+ This function serves as the entry point for APs when
+ they are awakened by the stores in the memory address
+ indicated by the MP_HANDOFF_INFO structure.
+ @param[in] CpuMpData Pointer to PEI CPU MP Data
+**/
+VOID
+EFIAPI
+DxeApEntryPoint (
+ CPU_MP_DATA *CpuMpData
+ )
+{
+ UINTN ProcessorNumber;
+
+ GetProcessorNumber (CpuMpData, &ProcessorNumber);
+ InterlockedIncrement ((UINT32 *)&CpuMpData->FinishedCount);
+ RestoreVolatileRegisters (&CpuMpData->CpuData[0].VolatileRegisters, FALSE);
+ PlaceAPInMwaitLoopOrRunLoop (
+ CpuMpData->ApLoopMode,
+ CpuMpData->CpuData[ProcessorNumber].StartupApSignal,
+ CpuMpData->ApTargetCState
+ );
+ ApWakeupFunction (CpuMpData, ProcessorNumber);
+}
+
/**
Wait for AP wakeup and write AP start-up signal till AP is waken up.
@@ -1857,6 +1892,68 @@ AmdSevUpdateCpuMpData (
OldCpuMpData->NewCpuMpData = CpuMpData;
}
+/**
+ Switch Context for each AP.
+**/
+VOID
+EFIAPI
+SwitchContextPerAp (
+ VOID
+ )
+{
+ UINTN ProcessorNumber;
+ CPU_MP_DATA *CpuMpData;
+ CPU_INFO_IN_HOB *CpuInfoInHob;
+
+ CpuMpData = GetCpuMpData ();
+ CpuInfoInHob = (CPU_INFO_IN_HOB *)(UINTN)CpuMpData->CpuInfoInHob;
+ GetProcessorNumber (CpuMpData, &ProcessorNumber);
+
+ SwitchStack (
+ (SWITCH_STACK_ENTRY_POINT)(UINTN)DxeApEntryPoint,
+ (VOID *)(UINTN)CpuMpData,
+ NULL,
+ (VOID *)((UINTN)CpuInfoInHob[ProcessorNumber].ApTopOfStack)
+ );
+}
+
+/**
+ This function is intended to be invoked by the BSP in order
+ to wake up the AP. The BSP accomplishes this by triggering a
+ start-up signal, which in turn causes any APs that are
+ currently in a loop on the PEI-prepared memory to awaken and
+ begin running the procedure called SwitchContextPerAp.
+ This procedure allows the AP to switch to another section of
+ memory and continue its loop there.
+ @param[in] MpHandOff Pointer to MP hand-off data structure.
+**/
+VOID
+SwitchApContext (
+ IN MP_HAND_OFF *MpHandOff
+ )
+{
+ UINTN Index;
+ UINT32 BspNumber;
+
+ BspNumber = GetBspNumber (MpHandOff);
+
+ for (Index = 0; Index < MpHandOff->CpuCount; Index++) {
+ if (Index != BspNumber) {
+ *(UINTN *)(UINTN)MpHandOff->Info[Index].StartupProcedureAddress =
(UINTN)SwitchContextPerAp;
+ *(UINT32 *)(UINTN)MpHandOff->Info[Index].StartupSignalAddress =
MpHandOff->StartupSignalValue;
+ }
+ }
+
+ //
+ // Wait all APs waken up if this is not the 1st broadcast of SIPI
+ //
+ for (Index = 0; Index < MpHandOff->CpuCount; Index++) {
+ if (Index != BspNumber) {
+ WaitApWakeup ((UINT32
*)(UINTN)(MpHandOff->Info[Index].StartupSignalAddress));
+ }
+ }
+}
+
/**
MP Initialize Library initialization.
@@ -2068,6 +2165,39 @@ MpInitLibInitialize (
CpuInfoInHob[Index].ApicId = MpHandOff->Info[Index].ApicId;
CpuInfoInHob[Index].Health = MpHandOff->Info[Index].Health;
}
+
+ DEBUG ((DEBUG_INFO, "MpHandOff->WaitLoopExecutionMode: %04d, sizeof (VOID
*): %04d\n", MpHandOff->WaitLoopExecutionMode, sizeof (VOID *)));
+ if (MpHandOff->WaitLoopExecutionMode == sizeof (VOID *)) {
+ //
+ // In scenarios where both the PEI and DXE phases run in the same
+ // execution mode (32bit or 64bit), the BSP triggers
+ // a start-up signal during the DXE phase to wake up the APs. This
causes any
+ // APs that are currently in a loop on the memory prepared during the PEI
+ // phase to awaken and run the SwitchContextPerAp procedure. This
procedure
+ // enables the APs to switch to a different memory section and continue
their
+ // looping process there.
+ //
+ CpuMpData->FinishedCount = 0;
+ CpuMpData->InitFlag = ApInitDone;
+ SaveCpuMpData (CpuMpData);
+ SwitchApContext (MpHandOff);
+ ASSERT (CpuMpData->FinishedCount == (CpuMpData->CpuCount - 1));
+
+ //
+ // Set Apstate as Idle, otherwise Aps cannot be waken-up again.
+ // If any enabled AP is not idle, return EFI_NOT_READY during waken-up.
+ //
+ for (Index = 0; Index < CpuMpData->CpuCount; Index++) {
+ SetApState (&CpuMpData->CpuData[Index], CpuStateIdle);
+ }
+
+ //
+ // Initialize global data for MP support
+ //
+ InitMpGlobalData (CpuMpData);
+
+ return EFI_SUCCESS;
+ }
}
if (!GetMicrocodePatchInfoFromHob (
diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.h
b/UefiCpuPkg/Library/MpInitLib/MpLib.h
index 9bb70415f3..2e7d1a0af5 100644
--- a/UefiCpuPkg/Library/MpInitLib/MpLib.h
+++ b/UefiCpuPkg/Library/MpInitLib/MpLib.h
@@ -467,6 +467,14 @@ GetWakeupBuffer (
IN UINTN WakeupBufferSize
);
+/**
+ Switch Context for each AP.
+**/
+VOID
+SwitchApContext (
+ IN MP_HAND_OFF *MpHandOff
+ );
+
/**
Get available EfiBootServicesCode memory below 4GB by specified size.
--
2.36.1.windows.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#106019): https://edk2.groups.io/g/devel/message/106019
Mute This Topic: https://groups.io/mt/99483119/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
