Shouldn't this also be modified for the flush image that is activated with err_chk ?
Regards, Steven -----Oorspronkelijk bericht----- Van: Martyn Welch [mailto:martyn.we...@ge.com] Verzonden: dinsdag 11 juni 2013 18:03 Aan: Greg Kroah-Hartman CC: de...@driverdev.osuosl.org; Manohar Vanga; De Roo, Steven; Martyn Welch Onderwerp: [PATCH 2/2] vme: tsi148: Master windows support USERx and CR/CSR accesses, not slaves The tsi148 driver is registering the slave images as supporting the "USER" access modes and CR/CSR access mode rather than the master images as it should. Remove the incorrect case entries for these modes from the tsi148_slave_set() function, stop registering slave_images as supporting these modes and instead register master windows as supporting these modes. Signed-off-by: Martyn Welch <martyn.we...@ge.com> --- drivers/vme/bridges/vme_tsi148.c | 11 +++-------- 1 files changed, 3 insertions(+), 8 deletions(-) diff --git a/drivers/vme/bridges/vme_tsi148.c b/drivers/vme/bridges/vme_tsi148.c index c04600e..0c61f4e 100644 --- a/drivers/vme/bridges/vme_tsi148.c +++ b/drivers/vme/bridges/vme_tsi148.c @@ -589,11 +589,6 @@ static int tsi148_slave_set(struct vme_slave_resource *image, int enabled, granularity = 0x10000; addr |= TSI148_LCSR_ITAT_AS_A64; break; - case VME_CRCSR: - case VME_USER1: - case VME_USER2: - case VME_USER3: - case VME_USER4: default: dev_err(tsi148_bridge->parent, "Invalid address space\n"); return -EINVAL; @@ -2476,7 +2471,8 @@ static int tsi148_probe(struct pci_dev *pdev, const struct pci_device_id *id) master_image->locked = 0; master_image->number = i; master_image->address_attr = VME_A16 | VME_A24 | VME_A32 | - VME_A64; + VME_A64 | VME_CRCSR | VME_USER1 | VME_USER2 | + VME_USER3 | VME_USER4; master_image->cycle_attr = VME_SCT | VME_BLT | VME_MBLT | VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 | VME_2eSST267 | VME_2eSST320 | VME_SUPER | VME_USER | @@ -2505,8 +2501,7 @@ static int tsi148_probe(struct pci_dev *pdev, const struct pci_device_id *id) slave_image->locked = 0; slave_image->number = i; slave_image->address_attr = VME_A16 | VME_A24 | VME_A32 | - VME_A64 | VME_CRCSR | VME_USER1 | VME_USER2 | - VME_USER3 | VME_USER4; + VME_A64; slave_image->cycle_attr = VME_SCT | VME_BLT | VME_MBLT | VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 | VME_2eSST267 | VME_2eSST320 | VME_SUPER | VME_USER | -- 1.7.0.4 _______________________________________________ devel mailing list devel@linuxdriverproject.org http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
