In my tests the following works on a fresh installation without modifying the xs_bonding:
Put this in /etc/rc.local ifenslave lanbond0 eth1 Reboot. And there we go: Anna wrote: > This is probably far from ideal, but it works for me and I'm putting it out > there in case you're messing with XS 0.5 and need to have eth1 working now > so you can test other stuff. I'm sure there's a more elegant solution. > > Put this in /etc/rc.local > > ifenslave lanbond0 eth1 > > Reboot. And there we go: > > [EMAIL PROTECTED] ~]# ifconfig eth1 > eth1 Link encap:Ethernet HWaddr 00:0D:56:05:7C:DA > UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 > RX packets:4348 errors:0 dropped:0 overruns:0 frame:0 > TX packets:5381 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:100 > RX bytes:368480 (359.8 KiB) TX bytes:6433735 (6.1 MiB) > > I've connected a few XOs to my test platform so far and haven't seen any > unexpected issues. I don't know if you have to edit > /etc/modprobe.d/xs_bonding with Jerry's suggestion below, but I've got that > in there. > > options lanbond0 mode=active-backup miimon=100 > options mshbond0 mode=active-backup miimon=100 > options mshbond1 mode=active-backup miimon=100 > options mshbond2 mode=active-backup miimon=100 > > Of course, you can just run ifenslave lanbond0 eth1, but it doesn't persist > on reboot. > > Anna Schoolfield > Birmingham > > > ------------------------------------------------------------------------ > > _______________________________________________ > Server-devel mailing list > [EMAIL PROTECTED] > http://lists.laptop.org/listinfo/server-devel >
_______________________________________________ Server-devel mailing list [EMAIL PROTECTED] http://lists.laptop.org/listinfo/server-devel
