Ok I got everything working nicely.
I downloaded the latest 3.6.0-rc7-wl from *ft-powersave* branch.
Tested with just compiling on my dev box but had constant reboots.
I then downloaded the latest Compat-wireless drivers recommended by
Chun-Yeow and Thomas.
I compiled and uploaded the updates folder to the kernel on my routers and
everything works.
I have ath5k mesh and authsae working nicely
and also have ath9k mesh and authsae working nicely
Here is a snapshot of my ath9k mesh scanned
Cell 01 - Address: 00:14:6c:64:4e:5a
Channel:11
Frequency:2.462 GHz (Channel 11)
Quality=70/70 Signal level=-31 dBm
Encryption key:on
ESSID:""
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s
Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
ESSID:"chan11Ntestmesh"
Extra:Mesh Network Path Selection Protocol ID: 0x01
Extra:Path Selection Metric ID: 0x01
Extra:Congestion Control Mode ID: 0x00
Extra:Synchronization ID: 0x01
Extra:Authentication ID: 0x00
Extra:Formation Info: 0x00
Extra:Capabilities: 0x09
Mode:Unknown/bug
Extra:tsf=00000000178f44e8
Extra: Last beacon: 862ms ago
IE: Unknown: 0000
IE: Unknown: 010882040B160C121824
IE: Unknown: 03010B
IE: Unknown: 32043048606C
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : unknown (8)
IE: Unknown:
2D1A4E101BFFFF000000000000000000000100000000000000000000
IE: Unknown:
3D160B0700000000FFFF0000000000000000000000000000
IE: Unknown: 720B6368616E31314E6D657368
IE: Unknown: 710701010001000009
Here is a snapshot of "iw dev mesh0 station dump"
Station 00:14:6c:64:4e:5a (on mesh0)
inactive time: 347 ms
rx bytes: 105385257
rx packets: 1071051
tx bytes: 248931116
tx packets: 2940347
tx retries: 45167
tx failed: 58
signal: -52 dBm
signal avg: -53 dBm
Toffset: -177390535 us
tx bitrate: 270.0 MBit/s MCS 15 40Mhz
mesh llid: 0
mesh plid: 0
mesh plink: ESTAB
authorized: yes
authenticated: yes
preamble: long
WMM/WME: yes
MFP: yes
TDLS peer: no
IPERF Test
iperf -c 10.20.80.220 -P 10 -i2 -t10 |grep SUM
[SUM] 0.0- 2.0 sec 20.7 MBytes 86.7 Mbits/sec
[SUM] 2.0- 4.0 sec 18.0 MBytes 75.7 Mbits/sec
[SUM] 4.0- 6.0 sec 19.4 MBytes 81.2 Mbits/sec
[SUM] 6.0- 8.0 sec 20.3 MBytes 85.1 Mbits/sec
[SUM] 8.0-10.0 sec 19.1 MBytes 80.3 Mbits/sec
[SUM] 0.0-10.1 sec 97.6 MBytes 80.8 Mbits/sec
I will be testing this with a 15 node mesh ath5k/ath9k and send back
results as they happen.
I would like to thank everyone on this list for all your help.
Fred
On Thu, Oct 4, 2012 at 1:31 PM, Thomas Pedersen <[email protected]> wrote:
> Hi Fred,
>
> On Wed, Oct 3, 2012 at 10:50 PM, fred veldini <[email protected]>
> wrote:
> > Hi Chun-Yeow
> >
> > I'm running a development box based on Ubuntu Linux Kernel
> 3.4.0-5-generic
> > I download the 80211s kernels from cozybit
>
> Like Chun-Yeow said, try the latest compat-wireless. The master branch
> of open80211s.git is no particular version of wireless-testing from
> about 10 months ago + Chun-Yeow's 'ath9k: Support RSN Mesh' patch,
> which has been upstream for a while anyway.
>
> Thomas
> _______________________________________________
> Devel mailing list
> [email protected]
> http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel
>
_______________________________________________
Devel mailing list
[email protected]
http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel
