On Oct 5, 2012 10:51 PM, "fred veldini" <[email protected]> wrote:
> Ok I got everything working nicely. > > I downloaded the latest 3.6.0-rc7-wl from *ft-powersave* branch. > Tested with just compiling on my dev box but had constant reboots. > I then downloaded the latest Compat-wireless drivers recommended by > Chun-Yeow and Thomas. > I compiled and uploaded the updates folder to the kernel on my routers and > everything works. > > I have ath5k mesh and authsae working nicely > and also have ath9k mesh and authsae working nicely > > Here is a snapshot of my ath9k mesh scanned > Cell 01 - Address: 00:14:6c:64:4e:5a > Channel:11 > Frequency:2.462 GHz (Channel 11) > Quality=70/70 Signal level=-31 dBm > Encryption key:on > ESSID:"" > Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s > 9 Mb/s; 12 Mb/s; 18 Mb/s > Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s > ESSID:"chan11Ntestmesh" > Extra:Mesh Network Path Selection Protocol ID: 0x01 > Extra:Path Selection Metric ID: 0x01 > Extra:Congestion Control Mode ID: 0x00 > Extra:Synchronization ID: 0x01 > Extra:Authentication ID: 0x00 > Extra:Formation Info: 0x00 > Extra:Capabilities: 0x09 > Mode:Unknown/bug > Extra:tsf=00000000178f44e8 > Extra: Last beacon: 862ms ago > IE: Unknown: 0000 > IE: Unknown: 010882040B160C121824 > IE: Unknown: 03010B > IE: Unknown: 32043048606C > IE: IEEE 802.11i/WPA2 Version 1 > Group Cipher : CCMP > Pairwise Ciphers (1) : CCMP > Authentication Suites (1) : unknown (8) > IE: Unknown: > 2D1A4E101BFFFF000000000000000000000100000000000000000000 > IE: Unknown: > 3D160B0700000000FFFF0000000000000000000000000000 > IE: Unknown: 720B6368616E31314E6D657368 > IE: Unknown: 710701010001000009 > > Here is a snapshot of "iw dev mesh0 station dump" > Station 00:14:6c:64:4e:5a (on mesh0) > inactive time: 347 ms > rx bytes: 105385257 > rx packets: 1071051 > tx bytes: 248931116 > tx packets: 2940347 > tx retries: 45167 > tx failed: 58 > signal: -52 dBm > signal avg: -53 dBm > Toffset: -177390535 us > tx bitrate: 270.0 MBit/s MCS 15 40Mhz > mesh llid: 0 > mesh plid: 0 > mesh plink: ESTAB > authorized: yes > authenticated: yes > preamble: long > WMM/WME: yes > MFP: yes > TDLS peer: no > > IPERF Test > iperf -c 10.20.80.220 -P 10 -i2 -t10 |grep SUM > [SUM] 0.0- 2.0 sec 20.7 MBytes 86.7 Mbits/sec > [SUM] 2.0- 4.0 sec 18.0 MBytes 75.7 Mbits/sec > [SUM] 4.0- 6.0 sec 19.4 MBytes 81.2 Mbits/sec > [SUM] 6.0- 8.0 sec 20.3 MBytes 85.1 Mbits/sec > [SUM] 8.0-10.0 sec 19.1 MBytes 80.3 Mbits/sec > [SUM] 0.0-10.1 sec 97.6 MBytes 80.8 Mbits/sec > > I will be testing this with a 15 node mesh ath5k/ath9k and send back > results as they happen. > > I would like to thank everyone on this list for all your help. > > Fred > > > > On Thu, Oct 4, 2012 at 1:31 PM, Thomas Pedersen <[email protected]>wrote: > >> Hi Fred, >> >> On Wed, Oct 3, 2012 at 10:50 PM, fred veldini <[email protected]> >> wrote: >> > Hi Chun-Yeow >> > >> > I'm running a development box based on Ubuntu Linux Kernel >> 3.4.0-5-generic >> > I download the 80211s kernels from cozybit >> >> Like Chun-Yeow said, try the latest compat-wireless. The master branch >> of open80211s.git is no particular version of wireless-testing from >> about 10 months ago + Chun-Yeow's 'ath9k: Support RSN Mesh' patch, >> which has been upstream for a while anyway. >> >> Thomas >> _______________________________________________ >> Devel mailing list >> [email protected] >> http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel >> > > > _______________________________________________ > Devel mailing list > [email protected] > http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel > >
_______________________________________________ Devel mailing list [email protected] http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel
