Thank-you very much for help and clarification , I think i didn't bootstrap the source code last time because this time I did get configure file which i then used for make and make install , this time I used enable-test=samples option and while using rtems-test on erc32 , 11 test were performed. And for the error pax is missing , I install pax separately , but sadly again got Build error ( this time error report was very confusing).
On Thu, Feb 11, 2021 at 12:40 AM Eshan Dhawan <eshandhawa...@gmail.com> wrote: > > > > On Thu, Feb 11, 2021 at 12:26 AM Ayushman Mishra <ayushvidush...@gmail.com> > wrote: >> >> I tested the environment ./source-builder/sb-check , it gave this >> result: RTEMS Source Builder - Check, 6 (61dcadee0825) >> Environment is ok >> When I used ../source-builder/sb-set-builder >> --prefix=/home/ayush/quickstart1/rtems/6 --target=sparc-rtems6 >> --with-rtems-bsp=erc32 --with-rtems-tests=yes 6/rtems-sparc , it >> started rebuilding and installing rtems-sparc tool suite ( just like >> it did with this ../source-builder/sb-set-builder >> --prefix=$HOME/quick-start/rtems/5 5/rtems-sparc , and took same >> amount of time to complete the process) but no erc32 bsp was installed >> ( bsp test said error: no executables supplied) , and using >> 6/rtems-kernel instead of 6/rtems-sparc it gives same Build error (pax >> is missing) , right now rsb is only working properly for rtems5 and >> not rtems6 on my system. > > RSB builds the tools required to build rtems > erc32 is a sparc BSP > for building a BSP > follow this : > https://docs.rtems.org/branches/master/user/installation/kernel.html >> >> >> On Wed, Feb 10, 2021 at 11:44 AM Eshan Dhawan <eshandhawa...@gmail.com> >> wrote: >> > >> > >> > >> > On Wed, Feb 10, 2021 at 10:36 AM Ayushman Mishra >> > <ayushvidush...@gmail.com> wrote: >> >> >> >> Thanks for the help Eshan but actually I have already performed this >> >> step (sudo apt-get build-dep build-essential gcc-defaults g++ gdb git >> >> \ >> >> unzip pax bison flex texinfo unzip python3-dev libpython-dev \ >> >> libncurses5-dev zlib1g-dev) , here since my system was not able to >> >> find libpython-dev (Unable to find a source package for libpython-dev >> >> ) so i used libpython2.7-dev , I tried with both python2-dev and >> >> python3-dev >> >> ( >> >> sudo apt-get build-dep build-essential gcc-defaults g++ gdb git \ >> >> unzip pax bison flex texinfo unzip python2-dev libpython2.7-dev \ >> >> libncurses5-dev zlib1g-dev >> >> Reading package lists... Done >> >> Picking 'gcc-defaults' as source package instead of 'g++' >> >> Picking 'python-defaults' as source package instead of 'python2-dev' >> >> Picking 'python2.7' as source package instead of 'libpython2.7-dev' >> >> Picking 'ncurses' as source package instead of 'libncurses5-dev' >> >> Picking 'zlib' as source package instead of 'zlib1g-dev' >> >> Reading package lists... Done >> >> Building dependency tree >> >> Reading state information... Done >> >> 0 upgraded, 0 newly installed, 0 to remove and 184 not upgraded. >> >> ) , >> > >> > did you test the environment >> > >> > ./source-builder/sb-check >> >> >> >> but then also same Build FAILED error comes up (configure: error: pax >> >> is missing) . Also I wanted to know does the rsb in rtems6 uses >> >> autoconf-based build system , since there is no configure file made >> >> and used. >> > >> > Also, try using >> > >> > ../source-builder/sb-set-builder --prefix=/home/ayush/quickstart1/rtems/6 >> > --target=sparc-rtems6 --with-rtems-bsp=erc32 --with-rtems-tests=yes >> > 6/rtems-sparc >> > >> >> >> >> On Wed, Feb 10, 2021 at 1:04 AM Eshan Dhawan <eshandhawa...@gmail.com> >> >> wrote: >> >> > >> >> > Hi ayushman >> >> > It looks you didn't install all the dependencies required >> >> > check this : >> >> > https://docs.rtems.org/branches/master/user/hosts/posix.html#linux >> >> > >> >> > On Wed, Feb 10, 2021 at 12:58 AM Ayushman Mishra >> >> > <ayushvidush...@gmail.com> wrote: >> >> >> >> >> >> Ayusman Mishra >> >> >> 1. I was going through ticket #4145 >> >> >> (https://devel.rtems.org/ticket/4145) and tried building bsp on rtems6 >> >> >> and rtems5 both using rsb >> >> >> (https://docs.rtems.org/branches/master/user/start/bsp-build.html#rsb-bsp-build) >> >> >> but got Build FAILED (it says pax is missing (configure: error: pax is >> >> >> missing.), I have attached full error report txt file). However I did >> >> >> build bsp erc32 and pc386 using rsb on rtems5 (first .bootstrap -c >> >> >> sb-bootstrap then used configure file >> >> >> ($HOME/development/rtems/rtems-5/configure --target=i386-rtems5 >> >> >> --enable-rtemsbsp=pc386 )) on rtems6 there is no sb-bootstrap file or >> >> >> configure file present/made. >> >> >> I wanted to know is there anyway of using RSB on rtems6. >> >> >> Also while building different bsp toolsets for rtems (erc32/pc386) I >> >> >> used rtems on 2 different directories , Is there any way of building >> >> >> different BSPs on same rtems? >> >> >> >> >> >> 2. I went through list of open projects and found projects related to >> >> >> testing and development of ecosystem quite interesting, >> >> >> #3710 https://devel.rtems.org/ticket/3710 >> >> >> #3860 https://devel.rtems.org/ticket/3860 >> >> >> #3892 https://devel.rtems.org/ticket/3892 >> >> >> I would be very grateful to know if any of the above projects is open >> >> >> for participation and if yes then work done/needed to be done in it. >> >> >> _______________________________________________ >> >> >> devel mailing list >> >> >> devel@rtems.org >> >> >> http://lists.rtems.org/mailman/listinfo/devel >> >> > >> >> > >> >> > >> >> > -- >> >> > Thanks >> >> > - Eshan _______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel