---
.../beatnik/net/if_mve/mve_smallbuf_tst.c | 145 ------------------
.../beatnik/net/porting/if_xxx.modini.c | 34 ----
2 files changed, 179 deletions(-)
delete mode 100644 bsps/powerpc/beatnik/net/if_mve/mve_smallbuf_tst.c
delete mode 100644 bsps/powerpc/beatnik/net/porting/if_xxx.modini.c
diff --git a/bsps/powerpc/beatnik/net/if_mve/mve_smallbuf_tst.c
b/bsps/powerpc/beatnik/net/if_mve/mve_smallbuf_tst.c
deleted file mode 100644
index 721ade30d1..0000000000
--- a/bsps/powerpc/beatnik/net/if_mve/mve_smallbuf_tst.c
+++ /dev/null
@@ -1,145 +0,0 @@
-#include <rtems.h>
-#include <bsp.h>
-#include <bsp/if_mve_pub.h>
-#include <stdlib.h>
-#include <stdio.h>
-
-/* Demo for the mv64360 ethernet quirk:
- *
- * $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
- * $$ buffer segments < 8 bytes must be aligned $$
- * $$ to 8 bytes but larger segments are not $$
- * $$ sensitive to alignment. $$
- * $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
- *
- * How to use:
- *
- * Init MVE driver on (unused) unit 2:
- *
- * mve = mvtst_init(2)
- *
- * data = { 1,2,3,4,5,6,7,8,9,0xa,0xb, ... }
- *
- * Alloc 2-element mbuf chain (1st holds an
- * ethernet header which is > 8bytes so we can't
- * test this with only 1 mbuf. The 2nd mbuf holds
- * a small fragment of data).
- *
- * mb = mvtst_getbuf(mve)
- *
- * Copy data into aligned area inside 2nd mbuf,
- * (so that you can see if the chip starts using
- * the aligned area rather than the unaligned
- * buffer pointer). Point mbuf's data pointer
- * at 'off'set from the aligned area:
- *
- * mvtst_putbuf(mb, data, len, offset)
- *
- * Send chain off:
- *
- * BSP_mve_send_buf(mve, mb, 0, 0)
- *
- * Watch raw data:
- *
- * tcpdump -XX -vv -s0 ether host <my-ether-addr>
- *
- * E.g, if offset = 1, len = 2 then we would like
- * to see
- *
- * GOOD:
- * < 14 header bytes > 0x02, 0x03
-
- * but if the chip starts DMA at aligned address
- * we see instead
- * BAD:
- * < 14 header bytes > 0x01, 0x02
- */
-
-static inline void *rmalloc(size_t l) { return malloc(l); }
-static inline void rfree(void *p) { return free(p); }
-
-#define _KERNEL
-#include <sys/param.h>
-#include <sys/mbuf.h>
-
-static void
-cleanup_buf(void *u_b, void *closure, int error)
-{
-rtems_bsdnet_semaphore_obtain();
- m_freem((struct mbuf*)u_b);
-rtems_bsdnet_semaphore_release();
-}
-
-struct mbuf *mvtst_getbuf(struct mveth_private *mp)
-{
-struct mbuf *m,*n;
-
- if ( !mp ) {
- printf("need driver ptr arg\n");
- return 0;
- }
-rtems_bsdnet_semaphore_obtain();
- MGETHDR(m, M_DONTWAIT, MT_DATA);
- MGET(n, M_DONTWAIT, MT_DATA);
- m->m_next = n;
-rtems_bsdnet_semaphore_release();
- /* Ethernet header */
- memset( mtod(m, unsigned char*), 0xff, 6);
- BSP_mve_read_eaddr(mp, mtod(m, unsigned char*) + 6);
- /* Arbitrary; setting to IP but we don't bother
- * to setup a real IP header. We just watch the
- * raw packet contents...
- */
- mtod(m, unsigned char*)[12] = 0x08;
- mtod(m, unsigned char*)[13] = 0x00;
- m->m_pkthdr.len = m->m_len = 14;
- n->m_len = 0;
- return m;
-}
-
-int
-mvtst_putbuf(struct mbuf *m, void *data, int len, int off)
-{
-int i;
- if ( m ) {
- m->m_pkthdr.len += len;
- if ( ( m= m->m_next ) ) {
- m->m_len = len;
- memcpy(mtod(m, void*), data, 32);
- m->m_data += off;
- printf("m.dat: 0x%08x, m.data: 0x%08x\n", m->m_dat, m->m_data);
- for ( i=0; i< 16; i++ ) {
- printf(" %02x,",mtod(m, unsigned char*)[i]);
- }
- printf("\n");
- }
- }
-
- return 0;
-}
-
-static void *alloc_rxbuf(int *p_size, unsigned long *paddr)
-{
- return *(void**)paddr = rmalloc((*p_size = 1800));
-}
-
-static void consume_buf(void *buf, void *closure, int len)
-{
- rfree(buf);
-}
-
-void *
-mvtst_init(int unit)
-{
-struct mveth_private *mp;
- mp = BSP_mve_setup(
- unit, 0,
- cleanup_buf, 0,
- alloc_rxbuf,
- consume_buf, 0,
- 10, 10,
- 0);
- if ( mp )
- BSP_mve_init_hw(mp, 0, 0);
- return mp;
-}
diff --git a/bsps/powerpc/beatnik/net/porting/if_xxx.modini.c
b/bsps/powerpc/beatnik/net/porting/if_xxx.modini.c
deleted file mode 100644
index 1abad7dc22..0000000000
--- a/bsps/powerpc/beatnik/net/porting/if_xxx.modini.c
+++ /dev/null
@@ -1,34 +0,0 @@
-#include <rtems.h>
-#include <porting/rtemscompat.h>
-
-/* CEXP module initialization/finalization */
-
-/* Copyright: Till Straumann <[email protected]>, 2005;
- * License: see LICENSE file.
- */
-
-void
-_cexpModuleInitialize(void *unused)
-{
-extern void NET_EMBEMB(rtems_,NETDRIVER_PREFIX,_bringup)(char *);
- METHODSPTR = &METHODS;
-/*
-#ifdef DEBUG
-
NET_EMBEMB(rtems_,NETDRIVER_PREFIX,_bringup)("192.168.2.13/255.255.255.0");
-#endif
-*/
-}
-
-int
-_cexpModuleFinalize(void *unused)
-{
-#ifdef DEBUG
-extern int NET_EMBEMB(rtems_,NETDRIVER_PREFIX,_bringdown)();
- if (NET_EMBEMB(rtems_,NETDRIVER_PREFIX,_bringdown)())
- return -1;
- METHODSPTR = 0;
- return 0;
-#else
- return -1;
-#endif
-}
--
2.26.2
_______________________________________________
devel mailing list
[email protected]
http://lists.rtems.org/mailman/listinfo/devel
