I think you can also remove beatnik/net/if_mve/testing.c?
On Wed, Mar 3, 2021 at 11:13 AM Vijay Kumar Banerjee <[email protected]> wrote: > > --- > .../beatnik/net/if_mve/mve_smallbuf_tst.c | 145 ------------------ > .../beatnik/net/porting/if_xxx.modini.c | 34 ---- > 2 files changed, 179 deletions(-) > delete mode 100644 bsps/powerpc/beatnik/net/if_mve/mve_smallbuf_tst.c > delete mode 100644 bsps/powerpc/beatnik/net/porting/if_xxx.modini.c > > diff --git a/bsps/powerpc/beatnik/net/if_mve/mve_smallbuf_tst.c > b/bsps/powerpc/beatnik/net/if_mve/mve_smallbuf_tst.c > deleted file mode 100644 > index 721ade30d1..0000000000 > --- a/bsps/powerpc/beatnik/net/if_mve/mve_smallbuf_tst.c > +++ /dev/null > @@ -1,145 +0,0 @@ > -#include <rtems.h> > -#include <bsp.h> > -#include <bsp/if_mve_pub.h> > -#include <stdlib.h> > -#include <stdio.h> > - > -/* Demo for the mv64360 ethernet quirk: > - * > - * $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ > - * $$ buffer segments < 8 bytes must be aligned $$ > - * $$ to 8 bytes but larger segments are not $$ > - * $$ sensitive to alignment. $$ > - * $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ > - * > - * How to use: > - * > - * Init MVE driver on (unused) unit 2: > - * > - * mve = mvtst_init(2) > - * > - * data = { 1,2,3,4,5,6,7,8,9,0xa,0xb, ... } > - * > - * Alloc 2-element mbuf chain (1st holds an > - * ethernet header which is > 8bytes so we can't > - * test this with only 1 mbuf. The 2nd mbuf holds > - * a small fragment of data). > - * > - * mb = mvtst_getbuf(mve) > - * > - * Copy data into aligned area inside 2nd mbuf, > - * (so that you can see if the chip starts using > - * the aligned area rather than the unaligned > - * buffer pointer). Point mbuf's data pointer > - * at 'off'set from the aligned area: > - * > - * mvtst_putbuf(mb, data, len, offset) > - * > - * Send chain off: > - * > - * BSP_mve_send_buf(mve, mb, 0, 0) > - * > - * Watch raw data: > - * > - * tcpdump -XX -vv -s0 ether host <my-ether-addr> > - * > - * E.g, if offset = 1, len = 2 then we would like > - * to see > - * > - * GOOD: > - * < 14 header bytes > 0x02, 0x03 > - > - * but if the chip starts DMA at aligned address > - * we see instead > - * BAD: > - * < 14 header bytes > 0x01, 0x02 > - */ > - > -static inline void *rmalloc(size_t l) { return malloc(l); } > -static inline void rfree(void *p) { return free(p); } > - > -#define _KERNEL > -#include <sys/param.h> > -#include <sys/mbuf.h> > - > -static void > -cleanup_buf(void *u_b, void *closure, int error) > -{ > -rtems_bsdnet_semaphore_obtain(); > - m_freem((struct mbuf*)u_b); > -rtems_bsdnet_semaphore_release(); > -} > - > -struct mbuf *mvtst_getbuf(struct mveth_private *mp) > -{ > -struct mbuf *m,*n; > - > - if ( !mp ) { > - printf("need driver ptr arg\n"); > - return 0; > - } > -rtems_bsdnet_semaphore_obtain(); > - MGETHDR(m, M_DONTWAIT, MT_DATA); > - MGET(n, M_DONTWAIT, MT_DATA); > - m->m_next = n; > -rtems_bsdnet_semaphore_release(); > - /* Ethernet header */ > - memset( mtod(m, unsigned char*), 0xff, 6); > - BSP_mve_read_eaddr(mp, mtod(m, unsigned char*) + 6); > - /* Arbitrary; setting to IP but we don't bother > - * to setup a real IP header. We just watch the > - * raw packet contents... > - */ > - mtod(m, unsigned char*)[12] = 0x08; > - mtod(m, unsigned char*)[13] = 0x00; > - m->m_pkthdr.len = m->m_len = 14; > - n->m_len = 0; > - return m; > -} > - > -int > -mvtst_putbuf(struct mbuf *m, void *data, int len, int off) > -{ > -int i; > - if ( m ) { > - m->m_pkthdr.len += len; > - if ( ( m= m->m_next ) ) { > - m->m_len = len; > - memcpy(mtod(m, void*), data, 32); > - m->m_data += off; > - printf("m.dat: 0x%08x, m.data: 0x%08x\n", m->m_dat, > m->m_data); > - for ( i=0; i< 16; i++ ) { > - printf(" %02x,",mtod(m, unsigned char*)[i]); > - } > - printf("\n"); > - } > - } > - > - return 0; > -} > - > -static void *alloc_rxbuf(int *p_size, unsigned long *paddr) > -{ > - return *(void**)paddr = rmalloc((*p_size = 1800)); > -} > - > -static void consume_buf(void *buf, void *closure, int len) > -{ > - rfree(buf); > -} > - > -void * > -mvtst_init(int unit) > -{ > -struct mveth_private *mp; > - mp = BSP_mve_setup( > - unit, 0, > - cleanup_buf, 0, > - alloc_rxbuf, > - consume_buf, 0, > - 10, 10, > - 0); > - if ( mp ) > - BSP_mve_init_hw(mp, 0, 0); > - return mp; > -} > diff --git a/bsps/powerpc/beatnik/net/porting/if_xxx.modini.c > b/bsps/powerpc/beatnik/net/porting/if_xxx.modini.c > deleted file mode 100644 > index 1abad7dc22..0000000000 > --- a/bsps/powerpc/beatnik/net/porting/if_xxx.modini.c > +++ /dev/null > @@ -1,34 +0,0 @@ > -#include <rtems.h> > -#include <porting/rtemscompat.h> > - > -/* CEXP module initialization/finalization */ > - > -/* Copyright: Till Straumann <[email protected]>, 2005; > - * License: see LICENSE file. > - */ > - > -void > -_cexpModuleInitialize(void *unused) > -{ > -extern void NET_EMBEMB(rtems_,NETDRIVER_PREFIX,_bringup)(char *); > - METHODSPTR = &METHODS; > -/* > -#ifdef DEBUG > - > NET_EMBEMB(rtems_,NETDRIVER_PREFIX,_bringup)("192.168.2.13/255.255.255.0"); > -#endif > -*/ > -} > - > -int > -_cexpModuleFinalize(void *unused) > -{ > -#ifdef DEBUG > -extern int NET_EMBEMB(rtems_,NETDRIVER_PREFIX,_bringdown)(); > - if (NET_EMBEMB(rtems_,NETDRIVER_PREFIX,_bringdown)()) > - return -1; > - METHODSPTR = 0; > - return 0; > -#else > - return -1; > -#endif > -} > -- > 2.26.2 > > _______________________________________________ > devel mailing list > [email protected] > http://lists.rtems.org/mailman/listinfo/devel _______________________________________________ devel mailing list [email protected] http://lists.rtems.org/mailman/listinfo/devel
