Does anyone have any insight into this problem? I can compile from source if any has patches they want me to try out. The chip is the Radeon Mobility 7000 IGP:
http://www.ati.com/technology/hardware/mobilityradeon7000IGP/index.html Thanks, Mike --original message to XFree86 list-- On Sat, 24 May 2003, Michael B Allen wrote: I'm trying to get the external dvi-d output on my IBM T30 via port replicator to work with my 1600x1200 flat panel. I tried X 4.2 but there was a lot of garbage on the screen. So I upgraded to X 4.3 and it's better but still there are red and green dots in gradient areas. I tried to take a screenshot but it was clean. IBM's website has this to say: TP A30, A31, T30 - Maximum Digital Video (DVI) Resolution is 1280 x 1024 at 60 Hz Symptom When attaching a Digital Flat Panel Display to the Digital Video Interactive (DVI) Connector on the back of the Dock or Port Replicator, running 1600 x 1200 resolution, video noise appears on the display. Affected configurations ThinkPad A30, A30p, A31, A31p and T30 computer systems external DVI Connector. Solution Use 1280 x 1024 or lower resolution with the DVI Display. Additional information DVI resolution higher than 1280x1024 is not supported on A30, A31, and T30 ThinkPads. But this doesn't say explicitly that it's a hardware problem. The noise isn't that bad. It's very very close but not quite. Any ideas? Thanks, Mike -- A program should be written to model the concepts of the task it performs rather than the physical world or a process because this maximizes the potential for it to be applied to tasks that are conceptually similar and, more important, to tasks that have not yet been conceived. _______________________________________________ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel
